All Balls Wheel Bearing Kit

Customer Reviews for All Balls Wheel Bearing Kit

Overall customer review score:

Showing All 292 Reviews

Return to All Balls Wheel Bearing Kit Product Page

Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.

Customer Reviews

All Balls Wheel Bearing Kit Reviews

Your review could win you a $100 or $500 gift card!

Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!

0 of 0 people found this review helpful.

works great!

Jacob in FL

Comments On Jul 29, 2014:went right in and still going strong with regular checking and greasing

Was this review helpful?

0 of 0 people found this review helpful.

Good bearings

Michael in NJ

Comments On Jul 14, 2014:Good price on these bearings and they always last. No need to pay more.

Was this review helpful?

0 of 0 people found this review helpful.

Sweet Deal

Brian in WV – Machine this part was bought for: 2012 POLARIS RANGER RZR 4 800

Comments On Jul 11, 2014:2 high quality bearings for the price of 1 stocker. What else is there to say?

Was this review helpful?

0 of 0 people found this review helpful.

Not at durable as OEM

Matt in GA

Comments On Jun 27, 2014:If you ride your bike hard and require dependable performance don't buy these. They'll last a few months and give up on you.

Was this review helpful?

0 of 0 people found this review helpful.

All Balls bearing never disapoint.

Kelly in WA – Machine this part was bought for: 1993 HONDA CR250R

Comments On Jul 04, 2014:All Balls has always been a quality product, have but many of their bearing sets in my fleet of MX bikes. Always fit right, include all the do-dads and last along time.

Was this review helpful?

0 of 0 people found this review helpful.

Perfect Fit, Very Short Life

JOSHUA in NY – Machine this part was bought for: 2006 KTM 450 EXC 4-Stroke

Comments On Sep 03, 2013:Perfect fitment and appear to be good quality.

Additional Comments On Jun 25, 2014:Within 2000 miles the seals had failed and allowed dirt/water to get into the bearings which then also failed. Not impressed with the lifespan.

Was this review helpful?

0 of 0 people found this review helpful.

All Balls Wheel Bearing Review

TRAVIS in IN

Comments On Jun 30, 2014:I have always had good luck with these kits. All balls is a good buy

Was this review helpful?

0 of 0 people found this review helpful.

Lacking in longevity

Bary in Utah – Machine this part was bought for: 2006 HONDA CRF450X

Comments On Jun 13, 2014:In preparation for a Baja trip, I swapped out my original stock wheel bearings with the All Balls Bearings only as a precaution. My original bearings showed no sign of failing but had A LOT of miles on them. I did 800 miles in Baja and about 100 miles since when one of the front bearings began squealing. I pulled them out and found one of them not rotating smoothly. pulling the seal I found that half of the cage had grease while the other half was bare. Not sure if that had anything to do with the failure of a result of the failure but it was an observation. So far the rear wheel bearings are not showing signs of failure but I am considering changing them out again due to a lack of confidence in All Balls Bearings.

Was this review helpful?

0 of 0 people found this review helpful.

Balls

Derrick in NY

Comments On May 31, 2014:No complaints here, good prices on decent parts

Was this review helpful?

0 of 0 people found this review helpful.

They roll

Lyndon in ON

Comments On May 20, 2014:What more can I say?

Was this review helpful?

0 of 0 people found this review helpful.

As described work well

Matt in NV – Machine this part was bought for: 2005 HONDA XR650R

Comments On May 20, 2014:built up a few rims for the Baja races, one of my hubs needed bearings so I put these in. They have held up well.

Was this review helpful?

0 of 0 people found this review helpful.

Good Bearings

Geoff in CA – Machine this part was bought for: 2001 HONDA CR250R

Comments On Apr 28, 2014:Replaced my bearings using the All Balls Bearings and have been riding on them over 10 rides now with no issues.

Was this review helpful?

0 of 0 people found this review helpful.

perfect fit

David in FL – Machine this part was bought for: 2006 KAWASAKI KX450F

Comments On Apr 24, 2014:Great product! everything went together perfect!.

Was this review helpful?

0 of 0 people found this review helpful.

Great Fit

GREG in TN – Machine this part was bought for: 2008 YAMAHA YZ450F

Comments On Apr 21, 2014:These are great fit. Seem to work well and smooth tight fit.

Was this review helpful?

0 of 0 people found this review helpful.

Good quality

Marcus in VA – Machine this part was bought for: 2004 YAMAHA GRIZZLY 660 4x4

Comments On Apr 12, 2014:The old ones were a pain to get out but these went in good and haven't had any problems with them

Was this review helpful?

0 of 0 people found this review helpful.

Perfect

Daniel in CA – Machine this part was bought for: 2003 HONDA CRF450R

Comments On Apr 10, 2014:Worked. No problems

Was this review helpful?

0 of 0 people found this review helpful.

Deffinatly Bearings

cody in SD – Machine this part was bought for: 2013 SUZUKI RMZ450

Comments On Mar 28, 2014:Good Price Cool Sticker They Roll

Was this review helpful?

0 of 0 people found this review helpful.

Wheel bearings

pat in WV – Machine this part was bought for: 2008 KTM 200 XC

Comments On Mar 27, 2014:Worked perfect/always take seals out and pack with grease

Was this review helpful?

0 of 0 people found this review helpful.

ALL Ballz RZR XP 900 Wheel bearings

ANTHONY in AZ – Machine this part was bought for: 2011 POLARIS RANGER RZR XP 900

Comments On Mar 24, 2014:Fit and finish isn't what I was hoping for, would purchase OEM parts next time

Was this review helpful?

0 of 0 people found this review helpful.

ok for the $

Kurt in AZ – Machine this part was bought for: 2006 KTM 65 SX

Comments On Mar 16, 2014:Ok for the $

Was this review helpful?

0 of 0 people found this review helpful.

Wheel Bearings

Doug in CA – Machine this part was bought for: 2009 KTM 450 EXC-R

Comments On Mar 11, 2014:Work great, good fit

Was this review helpful?

0 of 0 people found this review helpful.

good stuff

david in TN

Comments On Feb 05, 2014:No issues with fitment on my ktm. Quality replacements.

Was this review helpful?

0 of 0 people found this review helpful.

fit great, good replacement

MATT in WV – Machine this part was bought for: 2000 KTM 300 MXC

Comments On Feb 04, 2014:removed the wheel slop with these new bearings, i use all balls for everything unless i find something cheaper and all balls have held up just fine for me

Was this review helpful?

0 of 0 people found this review helpful.

Wheel bearings

PAT in CA

Comments On Jan 26, 2014:Bearings went in a the should . Excellent set of bearings . Will buy again !!

Was this review helpful?

0 of 0 people found this review helpful.

Easy install

Kevin in IL – Machine this part was bought for: 2009 YAMAHA YZ250F

Comments On Jan 22, 2014:Very easy to install. Haven't road the bike since completed the work but no complaints yet.

Was this review helpful?

0 of 0 people found this review helpful.

2001 rm250

Randall in NC – Machine this part was bought for: 2001 SUZUKI RM250

Comments On Jan 21, 2014:Perfect fit exceeded expectations

Was this review helpful?

0 of 0 people found this review helpful.

Perfect Fit

Rod in CA – Machine this part was bought for: 2002 KTM 520 MXC 4 Stroke

Comments On Jan 19, 2014:New bearing kit installed perfectly - will use All Balls againa and again.

Was this review helpful?

0 of 0 people found this review helpful.

Great Fit, Great Price!

Rick in FL – Machine this part was bought for: 1997 HONDA CR125R

Comments On Jan 20, 2014:Good Upgrade From Stock!

Was this review helpful?

0 of 0 people found this review helpful.

Great product!

matt in UT

Comments On Jan 14, 2014:Quick, easy and the price is right!

Was this review helpful?

0 of 0 people found this review helpful.

good quality

Guy in AB

Comments On Jan 14, 2014:seem to be holding up really well

Was this review helpful?

0 of 0 people found this review helpful.

good deal on good bearings

Wayne in FL – Machine this part was bought for: 2013 KTM 500 EXC

Comments On Jan 12, 2014:These bearings worked out perfectly. Perfect fit, easy install, great quality, and good price.

Was this review helpful?

0 of 0 people found this review helpful.

great fit. top quality

Mark in UT – Machine this part was bought for: 2011 HUSABERG FE 570

Comments On Dec 31, 2013:These are high quality and fit perfect!

Was this review helpful?

0 of 0 people found this review helpful.

All balls wheel bearing

THAD in IL – Machine this part was bought for: 2003 YAMAHA YZ250F

Comments On Dec 29, 2013:Excellent product. Fit right in wheels just like suppose to. Easy install

Was this review helpful?

0 of 0 people found this review helpful.

Replace stock with these.

Rodney in ON – Machine this part was bought for: 2013 KTM 350 XC-F

Comments On Dec 26, 2013:Replaced original bearings with these. Raced with them several times so far all they are holding up well. Will buy these again for all my bikes.

Was this review helpful?

0 of 0 people found this review helpful.

great upgrade over stock

Rick in SC – Machine this part was bought for: 2012 POLARIS RANGER 800 XP LE

Comments On Dec 22, 2013:love the All Balls bearings. Better than stock.

Was this review helpful?

0 of 0 people found this review helpful.

great stuff

BRIAN in NJ – Machine this part was bought for: 2014 YAMAHA GRIZZLY 700 4x4

Comments On Dec 09, 2013:always a good product from all balls

Was this review helpful?

0 of 0 people found this review helpful.

Works as intended

Forrest in GA – Machine this part was bought for: 2006 HONDA CRF250X

Comments On Dec 09, 2013:I don't know how the previous owner screwed up this bike so bad but all the bearings were shot. Can't go wrong with All Balls.

Was this review helpful?

0 of 0 people found this review helpful.

work good, fit perfect

BRET in WA

Comments On Nov 26, 2013:these work and fit great, not the best quality but work well for the money.

Was this review helpful?

0 of 0 people found this review helpful.

Perfect fit for my CR500

Steven in ON

Comments On Nov 15, 2013:Good product, haven't had an issue since replacing the bearings.

Was this review helpful?

0 of 0 people found this review helpful.

perfect!

ZACH in CA

Comments On Nov 15, 2013:cheap, works good, good seals. same as oem but cheaper!

Was this review helpful?

0 of 0 people found this review helpful.

Nice bearings

Ryan in NH – Machine this part was bought for: 2003 HONDA CR250R

Comments On Nov 17, 2013:Very smooth great fit

Was this review helpful?

0 of 0 people found this review helpful.

Good product

sean in SC – Machine this part was bought for: 2008 KTM 50 SX Junior

Comments On Nov 07, 2013:good product. haven't ridden the bike with the new bearings, but the wheel spins smoothly...

Was this review helpful?

0 of 0 people found this review helpful.

Wheel Bearings

Jason in OH

Comments On Oct 25, 2013:Product worked great installed without any extra trouble.

Was this review helpful?

0 of 0 people found this review helpful.

Nice balls!

Jacob in TX – Machine this part was bought for: 2002 KTM 520 MXC 4 Stroke

Comments On Oct 20, 2013:Great quality construction of these bearings. Little heat on the hub and they went right in. Wheels ride smooth. Would recommend

Was this review helpful?

1 of 1 people found this review helpful.

Its a bearing set

Daniel in NY – Machine this part was bought for: 2000 YAMAHA YZ250

Comments On Oct 10, 2013:They are bearings , they fit ,they come with a cool sticker. 5 stars

Was this review helpful?

0 of 0 people found this review helpful.

Cheap

Cody in PA

Comments On Sep 29, 2013:Very Cheap OEM replacements but just as good

Was this review helpful?

0 of 0 people found this review helpful.

Awesome

Wade in AL

Comments On Sep 23, 2013:Awesome

Was this review helpful?

0 of 0 people found this review helpful.

All balls wheel bearings

Baljit in BC – Machine this part was bought for: 2006 YAMAHA YZ250F

Comments On Sep 18, 2013:All balls wheel bearings is all I ever use in my bikes. Never let me down. Always fit nicely. Work like they should.

Was this review helpful?

0 of 0 people found this review helpful.

Went in easy and rolls smooth

Jess in OH – Machine this part was bought for: 2008 HONDA TRX 700XX

Comments On Sep 13, 2013:Kit was a great fit, bearings roll smooth and dust seals are heavy duty. Very happy, plus you get both sides so the price was unbeatable!

Was this review helpful?

0 of 0 people found this review helpful.

Great.

Blake in TX

Comments On Sep 16, 2013:Excellent product.

Was this review helpful?

0 of 0 people found this review helpful.

Be careful, need to add grease

EINAR in WA

Comments On Sep 08, 2013:They work fine if you pack them with more grease. the factory sometimes forgets, and then they explode on the trail and you dnf the event you are competing in.

Was this review helpful?

0 of 0 people found this review helpful.

Good Balls

Jeremiah in IN – Machine this part was bought for: 2004 YAMAHA YZ125

Comments On Sep 10, 2013:Bought the kit to solve a problem with play in the front wheel. Product was a breeze to install, and seems like a quality product. Fixed my sloppy front end.

Was this review helpful?

0 of 0 people found this review helpful.

All Balls!!

Sam in FL – Machine this part was bought for: 2010 HUSABERG FX 450

Comments On Aug 31, 2013:Fit as they should and haven't had any problems since install.

Was this review helpful?

0 of 0 people found this review helpful.

only bearings i buy

TYLER in CA

Comments On Aug 25, 2013:good stuff

Was this review helpful?

0 of 0 people found this review helpful.

great bearings

matt in PA

Comments On Aug 20, 2013:holding up great so far

Was this review helpful?

0 of 0 people found this review helpful.

All Balls when bearings

Christa in TX – Machine this part was bought for: 2011 YAMAHA YZ450F

Comments On Aug 19, 2013:I do a lot of water crossings up in mountains single track. The factory ones took a crap real quick and started to rust that stained my wheel hub. The factory ones are not sealed, the all balls are sealed and they have held up great! I installed over a year ago. I will buy again for sure! Quality is next to the expensive brands like SKF.

Was this review helpful?

0 of 0 people found this review helpful.

All balls

Walter in WA – Machine this part was bought for: 2006 KTM 200 XC-W

Comments On Aug 04, 2013:Outstanding quality!

Was this review helpful?

0 of 0 people found this review helpful.

Great Fit Easy to Install

Chris in OH – Machine this part was bought for: 2009 KTM 200 XC-W

Comments On Jul 31, 2013:These are great and not expensive. I completely packed mine with synthetic grease since they are on a dirtbike and see water/mud more than sustained speed.

Was this review helpful?

0 of 0 people found this review helpful.

new bearings are the best

Brad in WA – Machine this part was bought for: 2002 YAMAHA YZ426F

Comments On Jul 26, 2013:I rebuilt 4 wheels with new bearings and love the way they feel. Now my bike rolls smoothly and quietly. Nothing says over-maintenance more than replacing something that's not broken!

Was this review helpful?

0 of 0 people found this review helpful.

perfect fit

Jeff in UT – Machine this part was bought for: 2007 YAMAHA YZ250

Comments On Jul 21, 2013:Great replacement part! Fit was good and still spinning smooth after 6 months of abuse!

Was this review helpful?

0 of 0 people found this review helpful.

All Balls

edward in IA

Comments On Jul 06, 2013:I'm happy.

Was this review helpful?

0 of 1 people found this review helpful.

All good

craig in TAS – Machine this part was bought for: 1997 HONDA CR250R

Comments On Jul 04, 2013:Works great

Was this review helpful?

1 of 1 people found this review helpful.

Did not last.

David in TN – Machine this part was bought for: 2012 KAWASAKI KX250F

Comments On Jun 28, 2013:Only got 2 moths of riding in befor had to replace them. Hard woods riding and MX track.

Was this review helpful?

0 of 0 people found this review helpful.

Finally rolling

David in SC – Machine this part was bought for: 2002 YAMAHA YZ125

Comments On Jun 30, 2013:Fit great, All good so far. Removed all slop in front wheel. Will purchase set for rear when needed.

Additional Comments On Jun 30, 2013:Good fit. Removed all slop from worn front end. Replaced spacers at same time.

Was this review helpful?

0 of 0 people found this review helpful.

Awesome

Jerry in UT – Machine this part was bought for: 2006 HONDA CR85R Expert

Comments On Jun 30, 2013:Cant beat the price and quality.

Was this review helpful?

0 of 1 people found this review helpful.

Keep on rolling

David in SC – Machine this part was bought for: 2002 YAMAHA YZ125

Comments On Jun 30, 2013:Good fit. Seem to be of good quality. Install easy. Replaced wheel spacers at same time. Will buy a set for rear when needed

Was this review helpful?

0 of 0 people found this review helpful.

Bearings

DAVE in CA

Comments On Jun 13, 2013:went in real nice,good price

Was this review helpful?

0 of 0 people found this review helpful.

Great bearings, will buy again when needed!!

Chris in TAS – Machine this part was bought for: 2001 SUZUKI RM250

Comments On Jun 12, 2013:Decided to do my rear wheel bearings one afternoon as they were shot pretty bad!! All Balls Bearing Kit provided me with everything I needed to make the process go smoothly (all 3 bearings and 2 seals). Happy I bought this brand!

Was this review helpful?

0 of 0 people found this review helpful.

Just like stock

corey in WV – Machine this part was bought for: 2004 SUZUKI DR-Z 250

Comments On Jun 06, 2013:Easy to install and works well. I needed pretty bad. This one helps out a bunch nice and tight ride.

Was this review helpful?

0 of 0 people found this review helpful.

Only way to go

Kyle in NC

Comments On May 29, 2013:all balls makes a great product, I use them on all of my bikes and never have to worry

Was this review helpful?

0 of 0 people found this review helpful.

High quality bearing

Dave in CA – Machine this part was bought for: 2008 POLARIS OUTLAW 525 IRS

Comments On May 29, 2013:These bearings were easy to install and much more stout than the stock ones.

Was this review helpful?

0 of 0 people found this review helpful.

Bearings

Kenneth in FL

Comments On Apr 29, 2013:My bike eats bearings. But these seem to last a little longer than the others

Was this review helpful?

0 of 0 people found this review helpful.

Kx 250

Brian in MI – Machine this part was bought for: 1998 KAWASAKI KX250

Comments On Apr 24, 2013:put these in last year and they lasted all year and still strong I ride sandy single tracks

Was this review helpful?

0 of 0 people found this review helpful.

Excellent bearings!

Evan in IN

Comments On Apr 16, 2013:You just can not beat All Balls bearings in my opinion. I've never had them fail on me. I do make sure and pack them very good with grease other than what comes in them from the package to ensure that all the water, mud, sand and other grunge stay out, but when you change a tire out go ahead and pull the seals out of the bearings and use some form of cleaner to get the old grease out and repack the bearings with fresh grease if you want to get the most out of your money, and the most out of a bearing that gets a LOT crud run through them. Also it never hurts for a little grease to be put on your axles to help them slide through as you put the wheel back on and prevents corrosion from forming on your axle to your hub spacers and making those axles a pain in the butt to get out.

Was this review helpful?

0 of 0 people found this review helpful.

Great Bearings!

Lionel in BC

Comments On Apr 02, 2013:I have about 15 hours of use on these bearing and they still roll very smoothly. Installation was very easy, no special tools needed; just a socket and flat head screw driver. I bought a set of steering stem bearings from all balls and will be installing them soon. I'm very pleased with these wheel bearings.

Was this review helpful?

0 of 0 people found this review helpful.

Better than OEM

KEVIN in UT

Comments On Apr 02, 2013:Exact Fit rolls smooth

Was this review helpful?

0 of 0 people found this review helpful.

09 YZ 450F

Justin in NV

Comments On Mar 31, 2013:Not an exact machined fit. They went in, but not like OEM bearings. I bought two sets, which was helpful since i ruined one of the bearings. Will buy OEM next time.

Was this review helpful?

0 of 0 people found this review helpful.

A great set of wheel bearings. nice and smooth now

Ron in MO

Comments On Mar 17, 2013:installed these bearing in the front and back. fittment was great and the seals are really nice.

Was this review helpful?

0 of 0 people found this review helpful.

Great buy

JOHN in VA

Comments On Mar 16, 2013:worked as advertised, a great deal

Was this review helpful?

0 of 0 people found this review helpful.

Good Product and Great price

JIM in TX – Machine this part was bought for: 2007 KTM 450 XC-W

Comments On Mar 13, 2013:Like everyone else said. works like it should. They are still rolling.

Was this review helpful?

0 of 0 people found this review helpful.

Good Product.

TABITHA in FL

Comments On Mar 05, 2013:Good Product. Great Price.

Was this review helpful?

0 of 0 people found this review helpful.

Good

Jared in ID

Comments On Mar 04, 2013:Seem to be good quality, just installed so time will tell how well they last

Was this review helpful?

0 of 0 people found this review helpful.

Good bearings

Brent in NSW

Comments On Mar 02, 2013:Good bearings, have lasted well

Was this review helpful?

0 of 0 people found this review helpful.

great bearings

chase in ME

Comments On Mar 02, 2013:i always buy allballs. they last a long time

Was this review helpful?

0 of 0 people found this review helpful.

Good value!

Jason in SK – Machine this part was bought for: 2007 HONDA CR85R

Comments On Mar 02, 2013:Exactly as advertised, fit perfect! Don't forget to re-install the centre spacer like me!

Was this review helpful?

0 of 0 people found this review helpful.

good for the price

JAKE in ID – Machine this part was bought for: 2001 YAMAHA YZ125

Comments On Feb 15, 2013:These bearings may not last as long as others, but for the price they are the only bearings i will buy.

Was this review helpful?

0 of 0 people found this review helpful.

GOOD

ROBERT in KY – Machine this part was bought for: 2000 KAWASAKI KDX200

Comments On Feb 11, 2013:Good enough

Was this review helpful?

0 of 0 people found this review helpful.

All Balls

GREG in AR

Comments On Feb 12, 2013:just like factory, good product.

Was this review helpful?

0 of 0 people found this review helpful.

Great price, Great product

David in IL – Machine this part was bought for: 1990 HONDA XR80R

Comments On Feb 10, 2013:Easy to install, and a very good price, I have had no issues with them for my dirtbike.

Was this review helpful?

0 of 0 people found this review helpful.

Good bearings

Lorne in CT

Comments On Jan 28, 2013:These work as well as factory bearings.

Was this review helpful?

0 of 0 people found this review helpful.

All Balls Wheel bearing kit

Guy in ME – Machine this part was bought for: 2007 HONDA CR85R

Comments On Jan 10, 2013:Kit did what it should, performed great, and lasted as long as I kept the bike, and the price is way cheaper than OEM! Very satisfied, will continue to use All Balls products.

Was this review helpful?

0 of 0 people found this review helpful.

Excellent quality

DAVID in VA

Comments On Jan 02, 2013:These bearings are great quality from the seal to the way it pressed into the hub. They have been taking the abuse and mud and cleaning and still keep the seal and spinning smoothness. A++++++

Was this review helpful?

0 of 0 people found this review helpful.

Great replacement bearings

Kevin in IN – Machine this part was bought for: 2004 SUZUKI RM85L

Comments On Jan 01, 2013:These rear bearing fit and installed easily. Used them all summer and have held up great. Good price, quick shipping

Was this review helpful?

0 of 0 people found this review helpful.

Good Fit

Robert in AZ

Comments On Dec 26, 2012:Good Fit

Was this review helpful?

0 of 0 people found this review helpful.

Prefect

Derrick in FL – Machine this part was bought for: 2004 KAWASAKI KX125

Comments On Dec 19, 2012:Fit well and easy install

Was this review helpful?

0 of 0 people found this review helpful.

Get item, easy to install

Brian in AZ

Comments On Dec 16, 2012:Fit perfectly and was easy to install.

Was this review helpful?

0 of 0 people found this review helpful.

All Balls Great

curtis in UT

Comments On Dec 14, 2012:They lasted longer than the originals, have used them for two years and still smooth.

Was this review helpful?

0 of 0 people found this review helpful.

Carry a spare set

Jason in VIC – Machine this part was bought for: 2008 KTM 530 EXC-R

Comments On Dec 14, 2012:At this price you may as well have a spare set in the tool box at all times.

Was this review helpful?

0 of 0 people found this review helpful.

Carry a spare set

Jason in VIC – Machine this part was bought for: 2008 KTM 530 EXC-R

Comments On Dec 14, 2012:At this price you may as well have a spare set in the tool box at all times.

Was this review helpful?

0 of 0 people found this review helpful.

nice

JAMES in UT – Machine this part was bought for: 2005 SUZUKI RMZ450

Comments On Dec 11, 2012:as good as they come

Was this review helpful?