Customer Reviews for All Balls Rear Axle Bearing Kit
Overall customer review score:
Showing All 164 ReviewsReturn to All Balls Rear Axle Bearing Kit Product Page
Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.
Customer Reviews
All Balls Rear Axle Bearing Kit Reviews
Your review could win you a $100 or $500 gift card! 
Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!
0 of 0 people found this review helpful.
Great
Samuel in WV – Machine this part was bought for: 2005 HONDA TRX 250 RECON
Comments On May 17, 2013:Great buy and very easy to install.
Was this review helpful?
0 of 0 people found this review helpful.
Good product
TIM in WI – Machine this part was bought for: 2007 HONDA Rancher 420 4x4
Comments On May 15, 2013:Installed with ease. Had them in for a year and works fine.
Was this review helpful?
0 of 0 people found this review helpful.
Great
Kolton in IL
Comments On May 09, 2013:They hold up and are easy to install
Was this review helpful?
0 of 0 people found this review helpful.
Rear bearing upgrades
Bill in IL
Comments On May 01, 2013:Bearings lasted about 1.5 years. At that point the bearings inside were rusted and no longer round! Riding was mostly done in West Virginia, lots of water and rainy.
Was this review helpful?
0 of 0 people found this review helpful.
good product
marco in CA
Comments On Apr 26, 2013:Good product durable and cheap held up awsome
Was this review helpful?
0 of 0 people found this review helpful.
Bearings survived 1 year of trail riding.
Ben in GA – Machine this part was bought for: 2000 HONDA TRX 400EX
Comments On Apr 25, 2013:I wish they lasted longer. I will be buying again though. Perhaps a different grease will help them last longer.
Was this review helpful?
0 of 0 people found this review helpful.
Rear sintered metel
Brent in South Carolina
Comments On Apr 24, 2013:Great deleavery here in two days put on brakes it took about 30 min i will deff- order from rocky mountain atv /mc from now on out.
Was this review helpful?
0 of 0 people found this review helpful.
Good
Jeremy in OH
Comments On Apr 22, 2013:Greta as usual
Was this review helpful?
0 of 0 people found this review helpful.
way better then stock
Francis in MD
Comments On Apr 22, 2013:strong long lasting use plenty of grease when installing. warrior 350
Was this review helpful?
0 of 0 people found this review helpful.
good price for quality
Scotty in SC
Comments On Apr 17, 2013:a must buy if your atv is in need. was a breeze to install
Was this review helpful?
0 of 0 people found this review helpful.
good product
JEFF in OH
Comments On Apr 01, 2013:replaced worn out bearings perfect fit good quality
Was this review helpful?
0 of 0 people found this review helpful.
great product
RENE in CA – Machine this part was bought for: 2005 YAMAHA YFZ 450
Comments On Mar 08, 2013:great product...
Was this review helpful?
0 of 0 people found this review helpful.
very nice
cody in Ohio
Comments On Mar 07, 2013:Very nice bearings completely seal bearings havent rode a lot on them but very nice
Was this review helpful?
0 of 0 people found this review helpful.
nice for the price
WILLIAM in WA – Machine this part was bought for: 2004 HONDA TRX 450R
Comments On Feb 27, 2013:nice for the price
Was this review helpful?
0 of 0 people found this review helpful.
Exact fit
George in OH
Comments On Feb 21, 2013:worked fine, cheaper than pivot works so may not last as long but oh well ... they where in stock and i was ridding again
Was this review helpful?
0 of 0 people found this review helpful.
trx250r
KEVIN in CA – Machine this part was bought for: 1987 HONDA TRX 250R FOURTRAX
Comments On Feb 18, 2013:I have been using all balls bearing kits for a few years now with no problems.
Was this review helpful?
0 of 0 people found this review helpful.
great upgrade from factory bearings!!!
Nick in WV – Machine this part was bought for: 2006 POLARIS PREDATOR 500
Comments On Feb 17, 2013:Easy to install and realy makes a differance.
Was this review helpful?
1 of 1 people found this review helpful.
Good kit
Donald in PA – Machine this part was bought for: 2000 HONDA TRX 400EX
Comments On Feb 09, 2013:Had everything needed to rebuild the rear carrier. Make sure to pop out the seals on the bearings and add grease to them. They don't have a lot in them from the factory.
Was this review helpful?
0 of 0 people found this review helpful.
Honda parts
KRISTY in IN – Machine this part was bought for: 2005 HONDA TRX 400EX
Comments On Jan 28, 2013:Great prices on all Honda parts, saves us alot if money.
Was this review helpful?
0 of 0 people found this review helpful.
Rear Wheel Bearings
Joshua in GA – Machine this part was bought for: 2005 HONDA RUBICON 500 4X4
Comments On Jan 25, 2013:These rear wheel bearings worked great. They were a little squeaky at first, but after about five miles of riding, the squeaking went away. I've put about 120 miles on these bearings...running wide open and playing in the mud...and have had no issues thus far.
Was this review helpful?
0 of 0 people found this review helpful.
awesome
Richard in KY – Machine this part was bought for: 2006 HONDA TRX 450ER
Comments On Jan 21, 2013:this bearing kit worked awesome and im still using the same kit i bought months ago
Was this review helpful?
0 of 0 people found this review helpful.
no problems
Kane in VIC
Comments On Jan 20, 2013:excellent quality and good fit !!!
Was this review helpful?
0 of 0 people found this review helpful.
Worked well but I now prefer the Upgraded kit more
TRAVIS in NV – Machine this part was bought for: 2005 YAMAHA YFZ 450
Comments On Jan 11, 2013:I ran two sets of these bearing and they worked well both times. However, I think the upgrade kit is better now.
Was this review helpful?
0 of 0 people found this review helpful.
Great Value
TABITHA in FL – Machine this part was bought for: 2007 SUZUKI Z400 QUADSPORT
Comments On Jan 10, 2013:Fits great. Easy to install.
Was this review helpful?
0 of 0 people found this review helpful.
Better than Pivot Works
Jimmy in AZ – Machine this part was bought for: 2007 HONDA TRX 400EX
Comments On Jan 10, 2013:I have purchased both the Pivot Works set and this set, and this set has out lasted the Pivot Works set by a solid 6 months! I am very happy to say that I have over a full year on this set and the rear axle and its still solid :) Not to mention this set is cheaper than the pivot works too!
Was this review helpful?
0 of 0 people found this review helpful.
So far so good
MARCUS in CO – Machine this part was bought for: 2003 YAMAHA RAPTOR 660
Comments On Jan 01, 2013:Seems to be well made. Only time will tell how these bearings and seals hold up, but so far, so good.
Was this review helpful?
0 of 0 people found this review helpful.
Bearings
jamie in MI – Machine this part was bought for: 1988 HONDA TRX 250R FOURTRAX
Comments On Dec 23, 2012:Fit great and seem to be built good.
Was this review helpful?
0 of 0 people found this review helpful.
Yamaha Banshee
DENNIS in CO – Machine this part was bought for: 2000 YAMAHA BANSHEE 350
Comments On Nov 27, 2012:Good bearings. Fit nice and tight. No problems, good product. I did get them pressed.
Was this review helpful?
0 of 0 people found this review helpful.
Great Quality
Justin in PA – Machine this part was bought for: 2001 HONDA RANCHER 350 4X4
Comments On Nov 27, 2012:Bought thes bearings for my quad a couple months ago and still great. The kit came with all the bearings and oil seals needed to be replaced. Good quality
Was this review helpful?
0 of 0 people found this review helpful.
Works as it should.
Matthew in IL – Machine this part was bought for: 2002 YAMAHA RAPTOR 660
Comments On Nov 19, 2012:Worked great. Good as any other bearing but for a better price. Would recommend.
Was this review helpful?
0 of 0 people found this review helpful.
horible bearings
Wyatt in NV
Comments On Nov 04, 2012:After one year of use they went out on my raptor 660 i whould buy oem rather then thease.
Was this review helpful?
2 of 2 people found this review helpful.
Complete kit for less than oem
Rob in IL
Comments On May 02, 2012:I install an All Balls kit on any used quad or trike I buy
Additional Comments On Oct 16, 2012:I use All Balls kits for all my rear axle bearing replacements
Was this review helpful?
0 of 0 people found this review helpful.
good bearings, low price
David in IL
Comments On Oct 09, 2012:quality pc. at an affordable price plus RM service!
Was this review helpful?
0 of 0 people found this review helpful.
Easier than twin row install
MIKE in OK
Comments On Oct 02, 2012:The bearings are eaiser to install than the twin row, but only time will tell how well they hold up.
Was this review helpful?
0 of 0 people found this review helpful.
Bought them for my 96 XR400. Work and fit great.
Dennis in TX
Comments On Sep 28, 2012:The bearings and seals always fit great.
Was this review helpful?
0 of 0 people found this review helpful.
Good!!
Getty in OH
Comments On Aug 21, 2012:Worth the price
Was this review helpful?
0 of 0 people found this review helpful.
Buy the carrier with the bearings installed
DAVE in CA
Comments On Aug 09, 2012:It's a pain to switch out the bearings. I ended up buying the twin row carrier. Much easier.
Was this review helpful?
0 of 0 people found this review helpful.
Good fit
Robert in WA
Comments On Aug 06, 2012:Bought these for a Polaris 90, no problems.
Was this review helpful?
0 of 0 people found this review helpful.
Awesome
Derek in UT
Comments On Jul 29, 2012:Had these for 2 years, still holding up great
Was this review helpful?
0 of 0 people found this review helpful.
Honda TRX450R
MARK in MO
Comments On May 21, 2012:We put these bearings in a year ago, they are still solid! ?
Was this review helpful?
0 of 0 people found this review helpful.
all balls rear axle bearing
EARL in WA
Comments On May 06, 2012:these bearings work great.
Was this review helpful?
1 of 1 people found this review helpful.
great
Brock in MO
Comments On Apr 25, 2012:fit good
Was this review helpful?
1 of 1 people found this review helpful.
ltz 400
charles in MI
Comments On Apr 04, 2012:eazy install
Additional Comments On Apr 04, 2012:easy install. every thing went good. works great
Was this review helpful?
2 of 2 people found this review helpful.
Gets the job done
Harold in PA
Comments On Mar 22, 2012:Good kit. I had no problems.
Was this review helpful?
1 of 1 people found this review helpful.
Great Bearings!
Ian in MO
Comments On Mar 13, 2012:Very good bearings for the money.
Was this review helpful?
0 of 0 people found this review helpful.
All-Balls-Rear-Axle-Bearing-Kit Raptor 660
ROBERT in OR
Comments On Feb 16, 2012:Everything is here that you'll need to replace the bearings and seals. They work good for me.
Was this review helpful?
1 of 1 people found this review helpful.
Fucking good for the price!
Sebastien in QC
Comments On Dec 29, 2011:For a baja 650 2003, good fit and bullet proof for a fraction of the bombardier price!!! And i received it within only 3 days ( I leave in Canada, Quebec ) . Dont be affraid to buy, i m in love with rockymountainatv! Very good company ***** ;-)
Was this review helpful?
0 of 0 people found this review helpful.
Raptor 660
Evan in NL
Comments On Nov 22, 2011:Thought would of last longer but better than stock
Was this review helpful?
0 of 0 people found this review helpful.
Qood quality
Jonathan in AR
Comments On Nov 15, 2011:Just as good if not better than oem.
Was this review helpful?
0 of 0 people found this review helpful.
Inexpensive OEM alternative
JAY in VA
Comments On Sep 19, 2011:GREAT inexpensive product that comes a complete set - no shopping for bearings, races and seals separatly, will deffinatly use in my other machines when needed
Was this review helpful?
0 of 0 people found this review helpful.
Good bearings
JAMES in KY
Comments On Aug 13, 2011:These are good bearings but like anything will wear out after time.
Was this review helpful?
1 of 1 people found this review helpful.
Rear Axle Bearing
David in TN
Comments On Aug 04, 2011:Put these in my 400ex in jan 2011. I ride hard about every weekend trails and MX track so far no problems from them.
Was this review helpful?
0 of 0 people found this review helpful.
Great again
CHAD in WA
Comments On Jun 30, 2011:As stated before these are great products. Have replaced carriers and front hubs on numerous quads. Always a perfect fit. You will not be disappointed.
Was this review helpful?
0 of 0 people found this review helpful.
Good Stock replacement
MONTY in AB
Comments On May 27, 2011:Fits, works....what more could you ask for?
Was this review helpful?
0 of 1 people found this review helpful.
Wroks well.
Robert in OH
Comments On May 09, 2011:Works good. Cheap and the bearings are sealed better than stock. Take off the covers and grease them before you install.
Was this review helpful?
0 of 0 people found this review helpful.
good product
jeremy in IN
Comments On May 05, 2011:good product easy install has everything you need
Was this review helpful?
1 of 1 people found this review helpful.
thout i was getting
bobby in WV
Comments On Apr 22, 2011:these are a good product and fiar priced but win you order a set all you need is one pack not two. but i kept thim in case i need thim later on .
Was this review helpful?
0 of 1 people found this review helpful.
dont last
donald in KY
Comments On Apr 12, 2011:wear out too fast!
Was this review helpful?
0 of 0 people found this review helpful.
great bearings
Travis in IL
Comments On Apr 06, 2011:nice and smooth bearing wld purchase agsain if needed for my yamaha raptor
Was this review helpful?
1 of 1 people found this review helpful.
Great Axle
JIMMY in TX
Comments On Mar 23, 2011:Easy to install and performs great
Was this review helpful?
0 of 0 people found this review helpful.
Solved my problem
Christopher in GA
Comments On Feb 27, 2011:The new bearings worked great and I have not had any issues since they were installed.
Was this review helpful?
0 of 0 people found this review helpful.
Cheaper than oem.
Dawn in CA
Comments On Jan 17, 2011:good looking pair of bearings. just installed in my quad with ease.. time will tell if they last. had 3 years on stock bearing with little sign of wear..
Was this review helpful?
0 of 0 people found this review helpful.
bearings
CIRO in CA
Comments On Jan 14, 2011:I have always liked to use genuine components when it comes to bearings, etc. but I have come to find out ALL BALLS sells a very good product with competitive prices!!!
Was this review helpful?
0 of 0 people found this review helpful.
All Balls Rear Axle Bearing Kit
Roman in PA
Comments On Jan 05, 2011:See to hold up and good price
Was this review helpful?
0 of 0 people found this review helpful.
Excellent Bearings
Greg in IN
Comments On Dec 21, 2010:These bearing worked and fit great and saved me money on factory replacements and seem better
Was this review helpful?
1 of 1 people found this review helpful.
Good bearing
Thomas in PA
Comments On Nov 07, 2010:Good fit, no issues
Was this review helpful?
0 of 0 people found this review helpful.
great kit
cory in MS
Comments On Nov 03, 2010:these bearings are tough and long lasting
Was this review helpful?
0 of 0 people found this review helpful.
great
AVERY in MA
Comments On Nov 02, 2010:great bearings last a fair amount of time for the price
Was this review helpful?
0 of 0 people found this review helpful.
As advertised
Jared in KS
Comments On Nov 03, 2010:fit good no problems so far
Was this review helpful?
0 of 0 people found this review helpful.
Great Kit
bentley in LA
Comments On Oct 20, 2010:Great bearings
Was this review helpful?
0 of 0 people found this review helpful.
BEARINGS
KEVIN in NC
Comments On Oct 12, 2010:USE THES ALL THE TIME
Was this review helpful?
0 of 0 people found this review helpful.
Bearings
GALE in OR
Comments On Oct 07, 2010:Execelent
Was this review helpful?
0 of 0 people found this review helpful.
better and cheaper than stock
GENE in WV
Comments On Aug 27, 2010:crf450 well worth it.
Was this review helpful?
0 of 0 people found this review helpful.
not bad
adam in NJ
Comments On Aug 15, 2010:came with everything i need, good price, my stock bearing lasted me 7 yrs, so we will see how these do.
Was this review helpful?
0 of 0 people found this review helpful.
good for the price
CALEB in IL
Comments On Jul 23, 2010:cheap and last long
Was this review helpful?
0 of 0 people found this review helpful.
great price and lasts
Shawn in PA
Comments On Jul 17, 2010:Cheapest price around
Was this review helpful?
0 of 0 people found this review helpful.
bearings for 400 ex
Jared in CO
Comments On Jul 15, 2010:The hardest part of replacing the bearings is cleaning all the parts! what a dirty mess!
Bearings look high quality as are the seals that come with them.
If you are doing a 400 ex, make sure you replace, inspect or make sure you have all the o-rings that go on the axle assembly. they are there for a reason. Unfortunately your only option for most of them is honda. they are odd ball honda sizes. Thanks honda engineer who could not utilize sizes of o-rings listed on a freaking chart. what a racket.
Was this review helpful?
0 of 0 people found this review helpful.
bearings
Jim in NY
Comments On Jul 15, 2010:1 year later, as always, great products from this company
Was this review helpful?
0 of 0 people found this review helpful.
All Balls rear axle bearing kit
ANDY in MI
Comments On Jul 08, 2010:Easy install, all the parts I needed were there. It's my 2nd season on them and they are still in great shape.
Was this review helpful?
0 of 0 people found this review helpful.
great product
RYAN in SD
Comments On Jun 03, 2010:long lasting
Was this review helpful?
0 of 0 people found this review helpful.
great product
MICHAEL in OH
Comments On Jun 07, 2010:can't complain, went in easy, and have lasted quite some time now.
Was this review helpful?
0 of 0 people found this review helpful.
good bearings
CHRIS in IL
Comments On Apr 29, 2010:never have had a problem with these bearings
Was this review helpful?
0 of 0 people found this review helpful.
all balls all the way
Robert in FL
Comments On Apr 26, 2010:For some odd reason my raptor 700 loves eating axle bearings up and I stay away from mud, well that was with the other brand now I use all balls and no problems after 6 months
Was this review helpful?
0 of 0 people found this review helpful.
nice product and price to boot
Jason in IN
Comments On Apr 24, 2010:these bearing are great. the life of them surpass oem
Was this review helpful?
0 of 0 people found this review helpful.
All Balls
Chris in IA
Comments On Feb 17, 2010:Nice bearings. Seam to hold up so far
Was this review helpful?
0 of 0 people found this review helpful.
Top of the line
Evan in WA
Comments On Jan 08, 2010:Smooth, great performance
Was this review helpful?
0 of 0 people found this review helpful.
Works Great!!!!!!
Michael in IN
Comments On Jan 12, 2010:i put these in my 2004 yamaha banshee and they work great!!!!
Was this review helpful?
0 of 0 people found this review helpful.
awesome product, great price
clay in AL
Comments On Jan 06, 2010:put these on a kfx400. they work great. excellent choice
Was this review helpful?
2 of 2 people found this review helpful.
Fit perfect!
THOMAS in MI
Comments On Apr 24, 2009:Bearings are working great so far. Installation wasn't too bad. Comes with a cool decal for your machine too!
Additional Comments On Apr 24, 2009:Used on 2000 Honda 300EX
Was this review helpful?
1 of 1 people found this review helpful.
2004 Raptor 660 review
Kyle in MI
Comments On Apr 15, 2009:Easy install. It was harder getting the bearings out then actually getting them in. Be sure to be careful when installing them because they can still break. Just a little at a time with a big socket/hammer is the trick. Pound the socket on the outer steal ring. There are sealed and perfect fit. All Balls Engineering is the best product and cheapest too!
Was this review helpful?
0 of 0 people found this review helpful.
The Best
Sherry in NC
Comments On Mar 28, 2009:I bought these for my 1987 Honda fourtrax 125 and it is the best. Just bought a 1997 300ex and I'm going to buy another set of them
Was this review helpful?
0 of 0 people found this review helpful.
Good kit
DANIEL in NC
Comments On Mar 16, 2009:Overall good item. Would purchase again.
Was this review helpful?
0 of 0 people found this review helpful.
no complaints
BRYAN in NY
Comments On Feb 12, 2009:good parts no problems. i would use them again
Was this review helpful?
2 of 2 people found this review helpful.
all balls
BRETT in AL
Comments On Jan 18, 2009:very tough, have lasted a while longer than than other brands
Was this review helpful?
0 of 0 people found this review helpful.
idk
Matthew in MA
Comments On Dec 04, 2008:they are preety nice i put them in allitle under a year ago with no poblem and i ride preety hard on them and they just went tonight.(when i say hard i dont mean 40 foot jumps i do do some good size jumps and wear i ride you bounce of rocks pretty hard but if u are going to be jumping and landing hard i would not get these
Was this review helpful?
2 of 2 people found this review helpful.
Good Product
WALLACE in WA
Comments On Oct 19, 2008:Good product...It's all I use in all my machines.
Was this review helpful?
2 of 2 people found this review helpful.
got the job done
GREGG in AB
Comments On Aug 06, 2008:everything was there that i needed to rebuilt my axle. Two Thumbs Up
Was this review helpful?
0 of 0 people found this review helpful.
Great A+
LANDON in MT
Comments On Jul 07, 2008:These work excellent!!!
Was this review helpful?
0 of 0 people found this review helpful.
ALL BALLS REAR AXLE BEARINGS.
GILBERT in MO
Comments On Jun 05, 2008:THESE ARE VERY WELL MADE AND I FEEL COMFORTABLE RIDING THESE BEARINGS ON MY 115HP TO THE GROUND DRAG BANSHEE!
Was this review helpful?
1 of 1 people found this review helpful.
Great product!
MATT in UT
Comments On May 03, 2008:Seals and bearings are good quality. Will for sure use them again.
Was this review helpful?
Stay Connected!
© 2013 Rocky Mountain ATV, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, or editorial content without written permission is strictly prohibited. Prices are subject to change without notice.