Customer Reviews for Pivot Works ATV Rear Axle Bearing Kit
Overall customer review score:
Showing All 36 ReviewsReturn to Pivot Works ATV Rear Axle Bearing Kit Product Page
Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.
Customer Reviews
Pivot Works ATV Rear Axle Bearing Kit Reviews
Your review could win you a $100 or $500 gift card! 
Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!
0 of 0 people found this review helpful.
cheap and good
JEROME in QC
Comments On May 17, 2013:why not!!? makes you save money and still good quality
Was this review helpful?
0 of 0 people found this review helpful.
Long lasting
robert in OH – Machine this part was bought for: 2009 YAMAHA RAPTOR 700
Comments On May 10, 2013:I used the cheap ones on ebay they dont last long. these bearing last a long time and are well worth the money. inless you like tearing your rear axle out alot.
Was this review helpful?
0 of 0 people found this review helpful.
Pivot Works... the best there is plain and simple
George in OH
Comments On Feb 21, 2013:pivot works are the only aftermarket bearings i run in my machines... always perfect fit and long life.... thanks RM for that speedy delivery and like always the correct part
Was this review helpful?
0 of 0 people found this review helpful.
!!!!!!!!!!!
rex in CA – Machine this part was bought for: 2005 SUZUKI Z400 QUADSPORT
Comments On Jan 22, 2013:completely rebuilt the chassis and powder coated her, this was just one of the issues we fixed; been two years of running her hard..........
Was this review helpful?
0 of 0 people found this review helpful.
not good
tom in alberta in Alberta – Machine this part was bought for: 2007 SUZUKI King Quad 700 4x4
Comments On Dec 17, 2012:i put a set in my kingquad. they lasted 1season now the bearings r shot. but i do ride alot of mud. would not recommend them if you like mud
Was this review helpful?
0 of 0 people found this review helpful.
Bearing kit
Evan in NL
Comments On Nov 08, 2012:Wore out kinda fast but cheap
Was this review helpful?
0 of 0 people found this review helpful.
GREAT
Daniel in CHC
Comments On Aug 27, 2012:Perfect fit Easy to install they seem to be holding together so far hope they last only time will tell.
Was this review helpful?
0 of 0 people found this review helpful.
GREAT BEARING CO.
Michael in NJ
Comments On Jan 18, 2012:I can't tell you how many bearing jobs I did on banshees and warriors over the years, but Pivot Works bearings are quality and easy to install. Nice product.
Was this review helpful?
0 of 0 people found this review helpful.
Great
Doug in CA
Comments On Apr 11, 2011:Perfect fit. Easy to install.
Was this review helpful?
0 of 0 people found this review helpful.
pivot works
DAVID in PA
Comments On Jan 14, 2011:very good for the prices!
Was this review helpful?
0 of 0 people found this review helpful.
Great bearings
DAN in MA
Comments On Jul 13, 2010:I had all balls bearings but they lasted 1 season. Im on my third season with the pivot works bearings and theyre still holding up with almost no play. If you install them right they will last for quite some time...
Was this review helpful?
0 of 0 people found this review helpful.
pivot works AtV rear axle bearing kit
ANDY in MI
Comments On Jul 08, 2010:all the parts were there, fit great no issues.
Was this review helpful?
0 of 1 people found this review helpful.
I DO NOT RECOMEND
Ben in MN
Comments On May 10, 2010:I bouhgt these bearings over all balls because they were more expensive thinking that they would last longer. I maid a bad choice the bearings lasted a little over three months and now i need to replace them agian.
Was this review helpful?
0 of 0 people found this review helpful.
not so impressed
Robert in FL
Comments On Apr 26, 2010:Bearings seized up within three months, thats with very little mudding, ok product but use plenty of waterproof grease. I went to all balls and have had alot better luck.
Was this review helpful?
0 of 0 people found this review helpful.
Pivot works rear axle bearings made out of butter
RANDOLPH in PA
Comments On Apr 05, 2010: Well, I'm on about my 3rd set of these pivot-works rr-axle bearings. I only get about 1 season out of them before they have excess play in them. I have a new carrier & axle, so it's not wear on either one of those items. I just don't think the quality is in the bearings from the start. Whenever I pull the carrier apart, it's always slopped w/mud & dirt on the inside, so I'd say the seals are crap & not doing their job. Maybe that's the whole problem - bad quality seals?? I'm going to try a different brand next time around to see if I can get any longevity out of a different kind. The stock bearings/seals lasted over 2 yrs & now I can't even get 1 yr out of Pivot-works. I would not recommend this product for an aggressive rider.
Was this review helpful?
0 of 0 people found this review helpful.
tough
clint in TN
Comments On Sep 24, 2009:These bearings are by far the best aftermarket bearings. They last as good as the OE. Very happy with them.
Was this review helpful?
0 of 0 people found this review helpful.
400ex
Ross in PA
Comments On Sep 14, 2009:junk.. lasted 3 months ..dont think im buying again
Was this review helpful?
1 of 1 people found this review helpful.
great buy
TRAVIS in VT
Comments On Apr 14, 2009:i have gone through two sets of OEM bearings before i bought these and installed them my self. so far they are holding up very well. they fit great and so far have exceeded my expectations.
Was this review helpful?
0 of 0 people found this review helpful.
just like any other bearing
BRETT in AL
Comments On Mar 23, 2009:lasts as long as the factory bearing...which in an sport atv isn't very long. good price compared to factory bearings
Was this review helpful?
0 of 0 people found this review helpful.
NO PROBLEMS
HEATH in IN
Comments On Dec 19, 2008:RACE THE FULL 2008 SEASON NO PROBLEMS. GREAT PRODUCT
Was this review helpful?
1 of 1 people found this review helpful.
01 660 raptor
Lee in PA
Comments On May 02, 2008:good bearings no problems worth the money
Was this review helpful?
1 of 1 people found this review helpful.
Pivot works= Impressive
Trenton in UT
Comments On Mar 28, 2008:I recently put these bearings in when i put my new axle in. If you can't decide in between the other bearings and these ones, belive me, spend the extra ten bucks, these ones are way better. They went into the carrier fairly easy, and last a long time. just go ahead and trust me on this one, reach deep and find another ten bucks for the freakin things.
Was this review helpful?
1 of 1 people found this review helpful.
Your stock bearings are about to wear out!!!
RYAN in NV
Comments On Feb 22, 2008:If you ride hard, don't mess around. get rid of those sloppy stock bearings and get something that can take the abuse. I installed these bearings over a year ago and have ridden a ton since then and they are as tight as the day I put them in. Just remember to put the spacer in between the two and put a decent amount of marine grease on both sides of the bearing. trust those seals ,their good!
Was this review helpful?
0 of 0 people found this review helpful.
i prefer pivot works over all bs
BRIAN in OK
Comments On Feb 07, 2008:of the two brands spend you money on the pivot works
Was this review helpful?
0 of 0 people found this review helpful.
GREAT KIT!
Mike in OH
Comments On Jan 19, 2008:THIS KIT IS GREAT TO COMPLETLY REBUILD YOUR AXLE. THE BEARINGS LAST ABOUT 3 YEARS ON MAJOR ABUSE!
Was this review helpful?
1 of 1 people found this review helpful.
Just like factory stuff
ERIC in AZ
Comments On Dec 19, 2007:but cheaper. Easy to change, even a Cave Man can do it.
Was this review helpful?
0 of 0 people found this review helpful.
Good quality
TONY in CA
Comments On Dec 17, 2007:These bearings fit great, the price is the best anywhere.
Was this review helpful?
0 of 0 people found this review helpful.
bearing kit
PHILIP in CA
Comments On Nov 24, 2007:Purchased for a 1995 Banshee. Seals didn't fit as well as stock, Ok, but i will run yamaha from now on.
Was this review helpful?
0 of 0 people found this review helpful.
pivot works bearings
PHILLIP in NY
Comments On Oct 31, 2007:good quality without going to the dealer def good buy
Was this review helpful?
1 of 1 people found this review helpful.
400 axle brgs
MILAN in PA
Comments On Oct 25, 2007:seem to have held up well to 3 years of hatfield-mccoy abuse. fresh seals & lubing housing o-rings w/ silicone grease key to longer life. good product for the beans.
Was this review helpful?
0 of 0 people found this review helpful.
better then OEM
CORY in OR
Comments On Oct 24, 2007:great price and easy to install.
Was this review helpful?
0 of 0 people found this review helpful.
pivot works
THOMAS in PA
Comments On Oct 22, 2007:Pivot works bearings are the best for just about anything that rotates or moves on your atv/motorcycle
Was this review helpful?
0 of 0 people found this review helpful.
Great Price
RON in WA
Comments On Oct 22, 2007: I saved $40.00 by not getting oem parts, and my bike cant tell the difference.
Was this review helpful?
1 of 1 people found this review helpful.
pivotworks, works.
MELTON in AZ
Comments On Oct 22, 2007:I put this product through the roughest desert race terrain and it holds up great. I recommend them to all my fellow racers and friends.
Was this review helpful?
0 of 0 people found this review helpful.
Great, complete kit.
Brian in FL
Comments On Oct 22, 2007:Top quality parts and everything in one package.
Was this review helpful?
1 of 1 people found this review helpful.
Best bang for the buck
JEFF in OH
Comments On Oct 22, 2007:this is an excellent product at an excellent price.
Was this review helpful?
Stay Connected!
© 2013 Rocky Mountain ATV, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, or editorial content without written permission is strictly prohibited. Prices are subject to change without notice.