Customer Reviews for All Balls Shock Bearing Kit
Overall customer review score:
Showing All 82 ReviewsReturn to All Balls Shock Bearing Kit Product Page
Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.
Customer Reviews
All Balls Shock Bearing Kit Reviews
Your review could win you a $100 or $500 gift card! 
Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!
0 of 0 people found this review helpful.
Excellent Bearings
Evan in IN
Comments On Apr 16, 2013:Great bearings, pre-greased from the manufacturer which is great, although I add some grease of my own to my new bearing to ensure they are fully lubed to take the mud and water abuse that woods riding puts the linkage bearings and wheel bearing through.
Was this review helpful?
0 of 0 people found this review helpful.
good kit
JOSHUA in ID
Comments On Apr 15, 2013:fit well and last ok
Was this review helpful?
0 of 0 people found this review helpful.
Great!
MARK in MI
Comments On Apr 11, 2013:Great fit! great price! will buy again!!
Was this review helpful?
0 of 0 people found this review helpful.
2007 YZ250
KATHLEEN in MO
Comments On Mar 17, 2013:Basic bearing, no more, no less. Fit fine.
Was this review helpful?
0 of 0 people found this review helpful.
Good Value
AARON in MI – Machine this part was bought for: 1989 YAMAHA YZ125
Comments On Mar 13, 2013:For the price, can't complain. Although for my machine, the upper shock kit was too thick, I had to grind the spacers down to fit.
Was this review helpful?
0 of 0 people found this review helpful.
great bearings
chase in ME
Comments On Mar 02, 2013:i always buy AllBalls. they last a long time.
Was this review helpful?
0 of 0 people found this review helpful.
Perfect fit
Rick in ID
Comments On Feb 25, 2013:This bearing works very well and I will buy it again. I like the rubber lip seal with this kit, it holds grease in better than the stock foam seal and keeps water out.
Was this review helpful?
0 of 0 people found this review helpful.
ok
ROBERT in KY – Machine this part was bought for: 1999 KAWASAKI KDX200
Comments On Feb 11, 2013:OK BEARINGS
Was this review helpful?
0 of 0 people found this review helpful.
shock bearing kit
Bryant in NV – Machine this part was bought for: 1992 SUZUKI RM250
Comments On Jan 29, 2013:Just as good as the OEM ones I removed.
Was this review helpful?
0 of 0 people found this review helpful.
worked great
JOHNNY in OK – Machine this part was bought for: 1999 KTM 300 EXC
Comments On Jan 24, 2013:Worked good for my ktm, which if anyone has knows it's a little different form the japanese bikes. I would order again!
Was this review helpful?
0 of 0 people found this review helpful.
does what it says
ERIK in AZ
Comments On Dec 22, 2012:Works just fine. Quality is good. Most important step is getting it centered and installed correctly, then keeping it clean.
Was this review helpful?
0 of 0 people found this review helpful.
Great Brand
Tyler in KS – Machine this part was bought for: 2004 YAMAHA YFZ 450
Comments On Dec 14, 2012:Great Product. Takes 3 Kits to do complet shock mount
Was this review helpful?
0 of 0 people found this review helpful.
Does the Job
Brian in PA – Machine this part was bought for: 2006 KTM 250 XC-W
Comments On Dec 08, 2012:All Balls does the job for the KTM Heim joint and has lasted for the entire riding season. I have no issues with this product and would not hesitate to buy again.
Was this review helpful?
0 of 0 people found this review helpful.
PDS lower shock bearing
Fred in OH – Machine this part was bought for: 2006 KTM 125 SX
Comments On Dec 07, 2012:Worked as good as OEM
Was this review helpful?
0 of 0 people found this review helpful.
good price
Adam in IA
Comments On Dec 06, 2012:just as good as any other bearing kit
Was this review helpful?
1 of 1 people found this review helpful.
These have been great
SEAN in WA – Machine this part was bought for: 2007 KTM 300 XC-W
Comments On Dec 02, 2012:I have used these shock bearings for quite some time and they have not let me down.
Was this review helpful?
0 of 0 people found this review helpful.
no problems
matt in PA
Comments On Nov 23, 2012:no problems after 50+ hours of hard blue diamond tracking
Was this review helpful?
0 of 0 people found this review helpful.
good product
Michael in PA
Comments On Oct 04, 2012:good product at a good price lasts as long as oem.
Was this review helpful?
0 of 0 people found this review helpful.
good product
Mitchell in NL
Comments On Sep 23, 2012:good bearing, perfect fit and great value considering it comes with all seals and collars however the needles in the bearing have no retaining piece like what is found in the stock bearing to keep the needles from falling out , not a big deal but I believe it would make it more reliable, but again for the price can't be beat. Highly reccomended
Was this review helpful?
0 of 0 people found this review helpful.
Decent quality
MATTHEW in IL
Comments On Sep 07, 2012:Decent quality and fit. - YZ250 2 Stroke
Was this review helpful?
0 of 0 people found this review helpful.
These did great for my Ktm!
SPENCER in TN
Comments On Aug 11, 2012:This kit took care of the lower shock bearings in my 01 KTM200Exc.Good quality parts,no complaints.
Was this review helpful?
0 of 0 people found this review helpful.
good product, easy installation
Seth A. in CO
Comments On Jun 29, 2012:product reolaced old oem part. easy to install. seems to be holding up to the abuse.
Was this review helpful?
0 of 0 people found this review helpful.
Good Replacement
Bret in MI
Comments On May 15, 2012:Worked fine, no issues.
Was this review helpful?
0 of 0 people found this review helpful.
Good Aftermarket
Jason in VIC
Comments On May 07, 2012:A good aftermarket bearing that fit properly. So far so good.
Was this review helpful?
0 of 0 people found this review helpful.
good bearing
Joseph in MA
Comments On Apr 07, 2012:worked good on my 02 kx250
Was this review helpful?
0 of 0 people found this review helpful.
05 KX250F Upper R. Shock
Joshua in PA
Comments On Jan 23, 2012:Very pleased with there other bearing kits however when i installed this kit the sleeve barely fit inside the bearing. Seems way too tight, but I did get it in and it does spin, you can definitely feel some resistance though.
Was this review helpful?
0 of 0 people found this review helpful.
heim joint was loose
Darin in AZ
Comments On Dec 19, 2011:I was dissapointed witht he quality of the hiem joint in the kit. It had play in it as delivered and looked like somthing that belonged on a farm tractor steering link arm. The rest of the kit was nice, I wish I could have used it.
Was this review helpful?
0 of 0 people found this review helpful.
great product
TYLER in MI
Comments On Dec 16, 2011:works just as good as the more expensive bearings for a fraction of the cost id def. rocomend this product to friends
Was this review helpful?
0 of 0 people found this review helpful.
All Balls Bearing kit
SCOTT in RI
Comments On Nov 29, 2011:Have used a bunch of these kits on various bikes mostly for swingarm and suspension. They have never let me down. Fit and function are just like OEM. Install, grease, ride on!!
Was this review helpful?
0 of 0 people found this review helpful.
good alternative to oem
CARTER in OR
Comments On Nov 16, 2011:this is a great product. fit and finish great
Was this review helpful?
0 of 0 people found this review helpful.
So far so good
paul in WY
Comments On Nov 01, 2011:No problems at all with fit and durability, and a reasonable price. What else do you need.
Was this review helpful?
0 of 0 people found this review helpful.
All Balls Shock Bearing Kit
JOSEPH in NSW
Comments On Aug 28, 2011:perfect
Was this review helpful?
0 of 0 people found this review helpful.
nice fit
Jeffry in MA
Comments On Aug 08, 2011:Nice fit. I just wasn't sure what seals to use.
Was this review helpful?
1 of 1 people found this review helpful.
Not so good
Curtis in TX
Comments On Jul 19, 2011:I bought this for my 2001 CR250 because of the reviews. While the bearing was excelent the race was not properly chamfered and the stop ring wouldn't go back in at all. I had to stick the bearing and race on the lathe and machine the proper chamfer on the race for it to work. I got it to work good but a normal person without the proper tools would be SOL. Will try pivot works next time.
Was this review helpful?
0 of 0 people found this review helpful.
So far so good
Mark in NH
Comments On Jul 14, 2011:This bearing kit had all of the parts, everything fit well and they look like decent quality. I installed them at the beginning of the season and they're still tight after plenty of racing, practice sessions and lots of power washing.
Was this review helpful?
0 of 0 people found this review helpful.
KTM upper shock kit
leo in CA
Comments On Jul 10, 2011:Worked great, made of quality parts from what I can tell and was very easy to put into 07 200 xc's shock. Much better deal than going oem
Was this review helpful?
0 of 0 people found this review helpful.
Great product
BRIAN in NJ
Comments On Jul 07, 2011:Easy to install with the right tools and some mechanical skill
Was this review helpful?
0 of 0 people found this review helpful.
Good product
Tim in MI
Comments On Jun 18, 2011:The bearing seem to be of good quality and the spacers fit well. A good solution for a worn shock bearing and better price than OEM.
Was this review helpful?
0 of 0 people found this review helpful.
don't bother buying for KTM
DIANE in ID
Comments On May 20, 2011:Trying to save some money and purchased the upper and lower Heim Joint replacement for my 08 KTM 300. Should have read all of the other reviews first.The fitments is very loose and sloppy after install. There is too much play in the upper and lower heim is terrible. Decided to go a different route and purchased a different brand. My loss but RMC helped with the matter the best they could.
Was this review helpful?
0 of 0 people found this review helpful.
Good quality product
ROGER in PA
Comments On Mar 19, 2011:Very pleased with this bearing kit, highly recommend,would buy again.
Was this review helpful?
0 of 0 people found this review helpful.
All Balls Shock Bearing Kit
TOMMY in NC
Comments On Mar 14, 2011:Even OEM doesn't last, so why spend the big bucks. These last as well as KTM bearings but less expensive.
Was this review helpful?
0 of 0 people found this review helpful.
Great bearings at a good price.
Korbin in ID
Comments On Feb 08, 2011:...
Was this review helpful?
0 of 0 people found this review helpful.
fits like OEM
LEE in NC
Comments On Feb 08, 2011:went in great , time will tell if they are durable.
Was this review helpful?
0 of 0 people found this review helpful.
Good purchase
Vince in PA
Comments On Jan 02, 2011:Excellent product
Was this review helpful?
0 of 0 people found this review helpful.
junk
BRYAN in NY
Comments On Dec 20, 2010:stick with oem
Additional Comments On Dec 20, 2010:junk
Was this review helpful?
0 of 0 people found this review helpful.
Good kit
GREGORY in MA
Comments On Dec 16, 2010: Good kit. No fittment issues. Lasting well. Installed on '04 KDX200.
Was this review helpful?
0 of 0 people found this review helpful.
Good Product
James in MO
Comments On Nov 22, 2010:Good quality product, good fit, installed easily with good directions. My son and I had never done this before. It was so easy that we decided to do the second bike that same evening. We installed these on a pair of KTM 200s.
Was this review helpful?
0 of 0 people found this review helpful.
Good value
waylon in WA
Comments On Oct 14, 2010:Great product for the price easy to install
Was this review helpful?
0 of 0 people found this review helpful.
Complete
SHAWN in MA
Comments On Sep 27, 2010:Come with everything needed to make your rear shock pivots tight again. Beats the oem cost to.
Was this review helpful?
0 of 0 people found this review helpful.
Great
Jason in CA
Comments On Aug 31, 2010:Works perfect.
Was this review helpful?
0 of 0 people found this review helpful.
better and cheaper than stock
GENE in WV
Comments On Aug 27, 2010:better and cheaper than stock
Was this review helpful?
0 of 0 people found this review helpful.
Good product and price
STEVE in WA
Comments On Aug 19, 2010: beats buying OEM stuff, haven't had any problems with all balls, used quite a few bearing sets in different areas
Was this review helpful?
0 of 0 people found this review helpful.
good
todd in NY
Comments On Jul 23, 2010:diffrent than pivot works but works the same
Was this review helpful?
0 of 0 people found this review helpful.
Save money! Great product
mike in NH
Comments On Jul 05, 2010:Perfect fit and a good price compared to others. Also the outer spacers really keep out dirt and water making them last longer. Just clean and regrease once in a while and they'll last a long time.
Was this review helpful?
0 of 0 people found this review helpful.
1999 YZ400F
DAVID in CA
Comments On Jul 04, 2010:The lower shock bearing is of high quality, comes with everything needed and installs easily. Great product. Make sure to use lots of grease. The All Balls linkage bearing kit INCLUDES THIS LOWER SHOCK BEARING so if you are ordering the linkage bearing kit, save your $20 and don't order the lower shock bearing.
Was this review helpful?
0 of 0 people found this review helpful.
no problems
AARON in NH
Comments On Jun 26, 2010:this kit works well and has all the stuff i needed. went together just like any other kit and is way cheaper than oem.
Was this review helpful?
0 of 0 people found this review helpful.
Tight fit
Mark in ID
Comments On Apr 07, 2010:I purchased this kit for my 97 CR250. After getting my bike put back together the rear shock was very stiff. I took it apart again and found the pin would not freely pivot inside the bearing, it would bind in certain spots. Maybe the one I got was defective, but I wasn't very happy overall with this product.
Was this review helpful?
0 of 1 people found this review helpful.
all other bearings are good....
kevin in AR
Comments On Mar 12, 2010:I bought the shock bearing but sold the bike b4 i installed them. I have used all balls wheel bearings many times and always been perfect. If its a bearing im buying all balls
Was this review helpful?
0 of 0 people found this review helpful.
Awesome Product!
Chad in SC
Comments On Feb 24, 2010:Awesome Product!
Was this review helpful?
0 of 0 people found this review helpful.
Good price, solid value
KENNETH in NJ
Comments On Dec 08, 2009:This kit is, at least for my yfz450r, only a lower shock bearing kit. I would like to have seen one as a kit for the whole rear end or for the several linkage points at least. With that said it was cheap enough for the one bearing, and it has withstood many jumps and bumps, deep sand and water, and it has held up just fine.
Was this review helpful?
0 of 0 people found this review helpful.
Didnt last very long
ROBERT in IN
Comments On Dec 14, 2009:Didnt last very long before they needed replaced again,but worked good when new
Was this review helpful?
0 of 0 people found this review helpful.
Excellent product
Kevin in MO
Comments On Sep 17, 2009:easy install excellent product should out last the stock one after 11years
Was this review helpful?
0 of 0 people found this review helpful.
all balls is the way to go
ORION in WA
Comments On Mar 08, 2009: Stays solid after much abuse .
Was this review helpful?
0 of 0 people found this review helpful.
All Balls Shock bearings
DAVID in CA
Comments On Nov 03, 2008:Excellent product, value priced. Not easy to install if you've never done it before or don't have the proper tools. BE CAREFUL!
Was this review helpful?
0 of 0 people found this review helpful.
Good Product
WALLACE in WA
Comments On Oct 19, 2008:Good product...It's all I use in all my machines.
Was this review helpful?
0 of 0 people found this review helpful.
This product worked well for me.
MIKE in AR
Comments On Jul 22, 2008:This product worked well for me.
Was this review helpful?
0 of 0 people found this review helpful.
super product
Darin in OR
Comments On Jul 03, 2008:put this kit on my sons warrior and it made it ride so much better he said. thanks rocky mountain!
Was this review helpful?
0 of 0 people found this review helpful.
Just as good.
Brian in IN
Comments On Apr 18, 2008:I always used Pivot works kits until I found these. These are the same quality at a lower price. It's nice that it has all of the seals too.
Was this review helpful?
0 of 0 people found this review helpful.
Good kit
BRIAN in ID
Comments On Mar 03, 2008:This is a good kit, but my personal preferance is pivot works kits
Was this review helpful?
0 of 0 people found this review helpful.
how it worked
KEVIN in WA
Comments On Jan 09, 2008:it was great and i would buy it again
Was this review helpful?
0 of 0 people found this review helpful.
ALL BALLS SHOCK BEARINGS
WILLIAM in OH
Comments On Jan 08, 2008:All balls bearings are the only way to go. Great value and quality!
Was this review helpful?
0 of 0 people found this review helpful.
Rebulid
JAY in AZ
Comments On Jan 01, 2008:Parts ordered where just what I needed for a complete rebuild of wife's ATV.
Was this review helpful?
0 of 0 people found this review helpful.
awesome fit
daniel in MD
Comments On Dec 18, 2007:highly recommend if your bearing goes out perfect fit no problems
Was this review helpful?
0 of 0 people found this review helpful.
Excellent everything!
TOM in PA
Comments On Dec 10, 2007:Excellent everything!
Was this review helpful?
0 of 0 people found this review helpful.
Great part, great price
DREW in WA
Comments On Nov 11, 2007:This is the rear shock bearing I put on my 95 suzuki Dr350se. It is good quality, and came with the necessary seals to install it. It has lasted me a full year and 11,000 miles of mixed on and off-road use and is finally starting to show some wear/looseness.
Was this review helpful?
0 of 0 people found this review helpful.
excellent product
KURT in NY
Comments On Oct 28, 2007:better than factory
Was this review helpful?
0 of 0 people found this review helpful.
A+ for All Balls
BRIAN in FL
Comments On Oct 22, 2007:A great, inexpensive alternative for expensive OEM bearing replacements. The kit comes with better seals than the OEM set-up.
Was this review helpful?
0 of 0 people found this review helpful.
simple
neil in PA
Comments On Oct 23, 2007:This product was cheaper and easier to install than oem. Came with every thing I needed I will buy it again.
Was this review helpful?
0 of 0 people found this review helpful.
ktm shock bearing
LANCE in TX
Comments On Oct 22, 2007:fit perfect and my kit included an extra seal which was perfect since I crushed one.
Was this review helpful?
0 of 0 people found this review helpful.
great bearing
SHAWN in GA
Comments On Oct 23, 2007:these bearings are great easy to install and work excellent.
Was this review helpful?
0 of 0 people found this review helpful.
Quality Replacement
ALTON in AZ
Comments On Oct 22, 2007:The All Balls Bearing Kits are of Excellent Quality and designed to fit at a reasonable price,and of course RM has them in stock most of the time so repairs go smoothly.
Was this review helpful?
0 of 0 people found this review helpful.
All Balls
ERIC in CA
Comments On Oct 18, 2007:Great price, great product will buy again!
Was this review helpful?
Stay Connected!
© 2013 Rocky Mountain ATV, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, or editorial content without written permission is strictly prohibited. Prices are subject to change without notice.