Customer Reviews for T.M. Designworks Powerlip Chain Roller
Overall customer review score:
Showing All 31 ReviewsReturn to T.M. Designworks Powerlip Chain Roller Product Page
Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.
Customer Reviews
T.M. Designworks Powerlip Chain Roller Reviews
Your review could win you a $100 or $500 gift card! 
Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!
0 of 0 people found this review helpful.
fit perfect
JEROME in QC
Comments On Apr 17, 2013:fit perfect on my kfx 434 , nice color super silent
Was this review helpful?
0 of 0 people found this review helpful.
nothing special
Joe in OH
Comments On Apr 01, 2013:The roller is good. The bearings are bad. Be prepared to lube the 'sealed' bearings regularly.
Was this review helpful?
0 of 0 people found this review helpful.
great roller
Evan in PA – Machine this part was bought for: 2004 HONDA TRX 400EX
Comments On Dec 31, 2012:Works great, has a lip in the center of the roller that rides in the middle of your chain to keep side to side movement minimal, no problems
Was this review helpful?
0 of 0 people found this review helpful.
great products
BEN in WI
Comments On Oct 08, 2012:high quality
Was this review helpful?
0 of 0 people found this review helpful.
T.M. Chain Roller
Andrew in TN
Comments On Sep 24, 2012:The stock roller on the raptor 700 wore out so I replaced with this. Quality product.
Was this review helpful?
0 of 0 people found this review helpful.
Would not line up on 97 RM 250
William in DE
Comments On Aug 01, 2012:I tried 1 washer on each side 2 washers on each side and every combination in between plus swithching the offset around and couldnt get it close. I ended up just putting it on top which to be honest I probably would have done anyway since it made A LOT of noise.
Was this review helpful?
0 of 0 people found this review helpful.
roller
SANTANA in NV
Comments On Aug 05, 2012:great roller. works good. easy to install
Was this review helpful?
1 of 1 people found this review helpful.
The Best
SCOTT in MD
Comments On Aug 03, 2012:Go with the best on your first purchase. T.M. Designworks stuff is great and lasts longer than no-name stuff.
Was this review helpful?
0 of 0 people found this review helpful.
Excellent
Andrew in CA
Comments On Jun 05, 2012:Works great
Was this review helpful?
2 of 2 people found this review helpful.
Best aftermarket roller I tried
Brian in PA
Comments On Mar 23, 2012:I still prefer OEM, but with some brands OEM are insanely priced, as is the case with Suzuki. The cheaper ones are really hard plastic, it sounds like something is wrong with the bike when riding slowly. This has held up good so far, and I wear drive parts out very quickly.
Was this review helpful?
1 of 1 people found this review helpful.
2004 crf450r
JOHN in CA
Comments On Feb 10, 2012:Great product. Noisier than the stock roller but a lot more durable. And the lip helps keep the chain on trac.
Was this review helpful?
0 of 0 people found this review helpful.
Power Lip Chain Roller
OSCAR in TX
Comments On Nov 30, 2011:Fit and finish are great. Made of really durable material. I have a lot of hours on my raptor and they are holding up great, vertually no signs of wear.
Was this review helpful?
0 of 0 people found this review helpful.
great roller
Nicholas in MI
Comments On Sep 06, 2011:works like its suppose to keeps chain straighter old roller was grinding
Was this review helpful?
0 of 0 people found this review helpful.
roller
patrick in CO
Comments On Aug 10, 2011:does the job it was bout for at a good price.
Was this review helpful?
0 of 0 people found this review helpful.
T.M. Roller for YZ 250F
DAVID in TX
Comments On Sep 06, 2010:Works great, keeps chain in line.
Was this review helpful?
0 of 0 people found this review helpful.
Better than regular rollers.
TYLER in IL
Comments On Jun 11, 2009:The Powerlip helps hold the chain in place and the material is much more durable than the regular rubber ones.
Was this review helpful?
0 of 0 people found this review helpful.
TM Design Roller
RICHARD in AZ
Comments On Apr 06, 2009:Guess, I didn't get the same exact results as everyone else who has commented about this product. Mine kept making noise like the bearing was wore out. So, I had to regrease the bearing a few times. Then, the bearing finally froze up. This though, took a couple of years to happen. All in all the product is good. However, I like the power lip. It seems to keep the chain inline. I run the entire TM Design kit. The guide, slider and rollers. What a difference it made.
Was this review helpful?
0 of 0 people found this review helpful.
Very good
NICHOLAS in CA
Comments On Apr 04, 2009:Much better than anything else I tried and is still on there.
Was this review helpful?
0 of 0 people found this review helpful.
solid
DONALD in CA
Comments On Nov 10, 2008:nice quality better than stock
Was this review helpful?
0 of 0 people found this review helpful.
use on predator and 250x
DONNY in TX
Comments On Mar 04, 2008:The powerlip chain roller is perfect for hardcore xc racing. Have been using TMD for many years and they always outlast the cheap ones.
Was this review helpful?
1 of 1 people found this review helpful.
Very nice roller
BLAINE in ND
Comments On Jan 24, 2008:Great roller! Bearings instead of the cheap stock one that just spins on shaft.
Was this review helpful?
0 of 0 people found this review helpful.
The exception!
ADAM in OH
Comments On Jan 23, 2008:What the slider lacked in quality was made up by the roller! Good design!
Was this review helpful?
0 of 0 people found this review helpful.
Great Product
TRACY in NV
Comments On Jan 20, 2008:Has last the 3 years so far I have had the bike so I would say great product.
Was this review helpful?
0 of 0 people found this review helpful.
Chain Roller
WILLIAM in PA
Comments On Nov 03, 2007:Great replacement part. Bought to replace OEM part and this works great.
Was this review helpful?
0 of 0 people found this review helpful.
Nice Lips
GREG in CA
Comments On Nov 02, 2007:Quality roller with bearings and a lip to keep the chain centered.
Was this review helpful?
0 of 0 people found this review helpful.
NICE COLOR
DAVE in CA
Comments On Oct 25, 2007:LOOKS GOOD ON MY QUAD I WILL PURCHASE THIS PRODUCT FOR ALL OF MY QUADS 8
Was this review helpful?
1 of 1 people found this review helpful.
Chain roller
STEVE in TN
Comments On Oct 24, 2007:I needed this roller because oem wore down. This ones been good.
Was this review helpful?
0 of 0 people found this review helpful.
Serves its purpose
JOSH in OH
Comments On Oct 22, 2007:Allows the chain to roll beautifully so i guess its a good buy!!!!
Was this review helpful?
1 of 1 people found this review helpful.
Great money saver
RYAN in WV
Comments On Oct 23, 2007:It works great with chain slide and made to last and keeps chain in line and tight.
Was this review helpful?
0 of 0 people found this review helpful.
good roller
Joseph in PA
Comments On Oct 22, 2007:Good roller, way better than stock. Smooth bearings, hard plastic, nice chain ridge.
Was this review helpful?
0 of 0 people found this review helpful.
T.M. Designworks Powerlip Chain Roller
Ernest in MN
Comments On Oct 22, 2007:My factory chain roller was making noise & I replaced it with the T.M. Designworks, no more noise. Easy install & superior product. Very Satisfied, Thanks RMATV
Was this review helpful?
Stay Connected!
© 2013 Rocky Mountain ATV, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, or editorial content without written permission is strictly prohibited. Prices are subject to change without notice.