Customer Reviews for Acerbis Lower Fork Cover Set
Overall customer review score:
Showing All 69 ReviewsReturn to Acerbis Lower Fork Cover Set Product Page
Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.
Customer Reviews
Acerbis Lower Fork Cover Set Reviews
Your review could win you a $100 or $500 gift card! 
Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!
0 of 0 people found this review helpful.
Looks better than stock
Scott in WV
Comments On May 17, 2013:nice look compared to faded stock fork guards.
Was this review helpful?
0 of 0 people found this review helpful.
Acerbis fork covers
Michael in CA – Machine this part was bought for: 2005 YAMAHA YZ250
Comments On May 17, 2013:Fit spot on. Have always had good luck with acerbis products
Was this review helpful?
0 of 0 people found this review helpful.
good quality!
Grant in VA – Machine this part was bought for: 2010 YAMAHA YZ450F
Comments On May 08, 2013:Good quality but have to fight with the a bit to get them to line up!
Was this review helpful?
0 of 0 people found this review helpful.
Junk plastic
Eric in PA – Machine this part was bought for: 2008 YAMAHA YZ450F
Comments On May 05, 2013:I bought this plastic a couple months ago and installed it. I have about 10 hours on it and it's full of white marks. I have never crashed my bike, it's just thin plastic. I compared the plastic to my old ufo and stock sets and it is noticeably thinner.
Was this review helpful?
0 of 0 people found this review helpful.
Fits like OEM
JOHN in FL – Machine this part was bought for: 2010 KTM 65 SX
Comments On May 08, 2013:Guards fit just like oem.
Was this review helpful?
0 of 0 people found this review helpful.
Perfect for me
Taylor in WA – Machine this part was bought for: 2012 HONDA CRF250X
Comments On Apr 24, 2013:Installed in a few minutes. They have been great ever since.
Was this review helpful?
0 of 0 people found this review helpful.
Perfect Fit and Better Than OEM
Christopher in MD
Comments On Apr 18, 2013:Less expensive than OEM but definitely not cheaper! Why pay more for same quality product. Get the Acerbis !
Was this review helpful?
0 of 0 people found this review helpful.
Seal saver
Jeff in MT
Comments On Apr 13, 2013:Wouldn't ride without them. I think they save fork seals. I ride in harsh, gritty, abrasive environment and haven't changed a seal since I started using these.
Was this review helpful?
0 of 0 people found this review helpful.
Perfect fit
matthew in WA
Comments On Apr 14, 2013:Installed to replace thrashed plastics, it it did the job...enuff said.
Was this review helpful?
0 of 0 people found this review helpful.
Great product
DAVE in CA
Comments On Mar 25, 2013:Would buy again, looks and fits as oem
Was this review helpful?
0 of 0 people found this review helpful.
Perfect Fit
Maryanne in RI – Machine this part was bought for: 2007 HONDA CRF150R Expert
Comments On Mar 13, 2013:Looks great and very easy to install.
Was this review helpful?
0 of 0 people found this review helpful.
Great product!
glenn in SC – Machine this part was bought for: 2000 HONDA CR250R
Comments On Mar 13, 2013:Looks great! Fit perfect! love the stickers! Love acerbis!
Was this review helpful?
0 of 0 people found this review helpful.
Works and looks like OEM
Chris in CA – Machine this part was bought for: 2001 YAMAHA YZ250
Comments On Mar 06, 2013:Much better
Was this review helpful?
0 of 0 people found this review helpful.
look great
Nicholas in VA
Comments On Feb 26, 2013:look great. just a real pain to put on. the mold was a little off and didnt want to line up on the bolt holes.
Was this review helpful?
0 of 0 people found this review helpful.
450x
jeff in TX – Machine this part was bought for: 2005 HONDA CRF450X
Comments On Feb 12, 2013:They add a good look, also assemble easy. They don't come with odometer cable mount but slight mod and there great!
Was this review helpful?
0 of 0 people found this review helpful.
Lower fork covers fit perfect!
JOHN in TX – Machine this part was bought for: 2000 KTM 200 MXC
Comments On Jan 22, 2013:I didn't expect these to fit perfectly, but they did! Anytime I've used non- OEM plastic, the fitment wasn't right, but these Acerbis' were! I'll be getting more...
Was this review helpful?
0 of 0 people found this review helpful.
Great product
Jeremy in NL – Machine this part was bought for: 2002 YAMAHA YZ250F
Comments On Jan 17, 2013:. Defiantly a great product. Fit perfect, look great, and really tough. Good price. Would buy again
Was this review helpful?
0 of 0 people found this review helpful.
Great product
kyle in NV
Comments On Jan 15, 2013:Great Product i recommend this company for any product you may need,trust what the pros use.
Was this review helpful?
0 of 0 people found this review helpful.
Looks Good
Derrick in FL
Comments On Jan 09, 2013:Fit was not as good as stock but once I got to fit looked great
Was this review helpful?
0 of 0 people found this review helpful.
They fit, what more do you need.
Daniel in CA
Comments On Jan 08, 2013:Fit my bike and were a perfect match for my new graphics. Look good.
Was this review helpful?
1 of 1 people found this review helpful.
Fit WR nicely w/ a couple of minor modifications
spencer in UT – Machine this part was bought for: 2008 YAMAHA WR250F
Comments On Dec 27, 2012:The LEFT fork cover is missing the 2 metal bushings for the brake cable connection, but you can take them from your stock fork cover.
The RIGHT fork cover does NOT have a cut out for the speed sensor lead. I cut one out, drilled a few sets of holes, and ran the lead up through the fork cover (similar to the stock cover) and attached it using small black zip ties.
NOTE: The "special notes" section for the part only shows up once you select a specific color (ie. once the part number shows up below the product name and your bike info (if entered)).
Other than those two minor mods, the fork covers bolted on fine, and seem good so far.
Was this review helpful?
1 of 1 people found this review helpful.
Fits well
clint in OR
Comments On Dec 10, 2012:Fit the WR just fine. Be forewarned there are no aftermarket lower guards that have the provision for the speedo cable.
Was this review helpful?
0 of 0 people found this review helpful.
Fit Great
John in ID
Comments On Nov 30, 2012:Fit and look awesome
Was this review helpful?
0 of 0 people found this review helpful.
Acerbis Fork Guards
Jeremy in UT
Comments On Oct 10, 2012:Look great and fit just like stock on my CRF250R. Bringing it back to new looking status. Thanks RM.
Was this review helpful?
0 of 0 people found this review helpful.
Do it!
Doug in CA
Comments On Oct 05, 2012:Best plastic out there!
Was this review helpful?
0 of 0 people found this review helpful.
Excellent quality
MATTHEW in IL
Comments On Sep 07, 2012:Excellent quality, great fit, great price. - YZ250 2 Stroke
Was this review helpful?
0 of 0 people found this review helpful.
Great product
DAVID in FL
Comments On Sep 05, 2012:just as good as oem
Was this review helpful?
0 of 0 people found this review helpful.
Acerbis-Lower-Fork-Cover-Set
EDWARD in CT
Comments On Aug 10, 2012:Perfect fit for KTM's
Was this review helpful?
0 of 0 people found this review helpful.
2007 GasGas EC300
Eric in CO
Comments On Aug 06, 2012:I bought these fork guards for a 2010 Husaberg FE530 to put on my 2007 GasGas EC300. Not a perfect fit for the GasGas but I am much happier with these fork guards than the stock GasGas guards. They are total wrap around (which the stock GasGas guards are not). I made a tiny notch in the left one for the rotor bolts to pass by. I removed the stock wear rings from the GasGas forks also (these guards are so stable they don't flex and hit the fork at all). Very pleased.
Was this review helpful?
0 of 0 people found this review helpful.
Just as I expected!
Kelly in AZ
Comments On Jul 23, 2012:I bought these for a '96 KX125. They work like they are supposed to. They mounted perfectly and have taken some serious rock impacts yet no damage to my fork tubes.
Was this review helpful?
0 of 0 people found this review helpful.
Good product
Bret in MI
Comments On May 15, 2012:Good replacement. No complaints.
Was this review helpful?
0 of 0 people found this review helpful.
sweet
DEAN in CA
Comments On May 02, 2012:fit perfect 1/2 the price. RM ATV*MC rocks
Was this review helpful?
0 of 0 people found this review helpful.
Is what it is and does what it does.
ROBERT in NV
Comments On Apr 02, 2012:Installed on 04 WR450. Part fit great would purchase again.
Was this review helpful?
0 of 0 people found this review helpful.
Great Fork Guards
Copeland in OK
Comments On Mar 20, 2012:Fork Guards work well and are holding up good. Fit was exact for my bike.
Was this review helpful?
0 of 0 people found this review helpful.
97 Kx 250
Brian in MI
Comments On Mar 11, 2012:fit perfect and looks great should last a long time
Was this review helpful?
0 of 0 people found this review helpful.
Close But No Cigar CRF250X '05
Sean in OH
Comments On Feb 08, 2012:I got these as replacement for Polisport that I sent back to RM ATV/MC which did not fit (see my revue of Polisport Fork Protectors (FP)). The Acerbis FP were high gloss and all the lower FP mounting holes were correct size for the shouldered bolts and matched the fork leg mounting holes. The non brake side has no mount for the odometer cable on the X. This is stated in the ad copy when you purchase. I have a Trail Tech computer so no need for that mount. The problem is the plastic "lug" at the top of the brake side FP that the brake hose mounts 2. The 2 holes are closer together than the holes on the small metal mounting bracket mounted to the hose itself. I chose to mount the bottom bolt and then use side cutters (wire cutters) to cut a slot in the top hole, right of center. This allowed the bolt to be moved up to align with bracket and still left enough plastic for the shoulder of the bolt to get a grip to secure it.
Was this review helpful?
0 of 0 people found this review helpful.
COVERS
Paul in OK
Comments On Feb 20, 2012:THEY ARE COVERS HOLD UP GOOD
Was this review helpful?
0 of 0 people found this review helpful.
Perfect fit
Cody in CA
Comments On Feb 15, 2012:Fit perfect on '08 CRF450R
Was this review helpful?
0 of 0 people found this review helpful.
2009 crf450x
JOHN in CA
Comments On Feb 10, 2012:They are good quality, but. There is no place to bolt the speedo cable bracket onto.
I called Acerbis about it and they told me they dont make a set specific for the 450X and that I would have to zip tie the cable to these.
Was this review helpful?
0 of 0 people found this review helpful.
They guard the lower forks. Mission accomplished.
Travis in TX
Comments On Jan 22, 2012:They fit as they should, and they do what they must. Good product.
Was this review helpful?
0 of 0 people found this review helpful.
right on
DUSTIN in MT
Comments On Dec 31, 2011:these are just as good as oem - in fact I beleive these are the oem ones without the sticker shock - bolt right on and go
Was this review helpful?
0 of 0 people found this review helpful.
450R fork covers, not 450X fork covers
chris in CA
Comments On Dec 27, 2011:I bought these Fork covers to replace some broken ones on my 07 450X. This set is designed for the 450R that does not feature the mount for the milege meter cable on the side. If you removed the factory honda milege meter and cable from your X then these will work fine. For those of you with the factory cable running from the front hub up alongside your forks up to your odometer these are not for you. This set does not feature the mount for the cable on the side of the guards like the OEM ones do, just a heads up.
TECH NOTE: Fork guards are CRF "R" style. No mounting location for "X" model odometer cable.
Was this review helpful?
0 of 0 people found this review helpful.
Perfect
SCOTT in -
Comments On Aug 09, 2011:Got these in white, they are a nice brilliant white that goes perfectly with my white cycra plastics. They lined up perfectly as well, no complaints.. buy em!
Was this review helpful?
0 of 0 people found this review helpful.
KTM guards look and fit like OEM
R.J. in SD
Comments On Jun 27, 2011:Bought these to change the color of the guards on my KTM 450XCF. they look great and fit just like OEM.
Was this review helpful?
0 of 0 people found this review helpful.
fit perfectly
erik in CO
Comments On Apr 20, 2011:good product, fit like the oe plastic
Was this review helpful?
0 of 0 people found this review helpful.
fragil
Sean in PA
Comments On Apr 12, 2011:Bought these for a 2004 rm 250. My buddy had a minor crash and one pretty much broke in half. They are to brittle and don't last long. This isn't the first time I have had problems with Acerbis products. I will no longer buy anything made by them.
Was this review helpful?
0 of 0 people found this review helpful.
Fork covers
Chad in CA
Comments On Mar 26, 2011:Just like oem. Would buy again.
Was this review helpful?
0 of 0 people found this review helpful.
Looks good
jonathan in MD
Comments On Mar 27, 2011:Very nice product and fit perfect.
Was this review helpful?
0 of 0 people found this review helpful.
fork covers
samuel in FL
Comments On Mar 08, 2011:great fit
Was this review helpful?
0 of 0 people found this review helpful.
Good Product
JEREMY in PA
Comments On Feb 23, 2011:It's a stock rpelacement part. Pretty good fit. Went on easy, and looks good. Can't ask for anything more. 2002 CR250R
Was this review helpful?
0 of 0 people found this review helpful.
Great product
RICHARD in WA
Comments On Feb 10, 2011:OEM fit and looks great.
Was this review helpful?
0 of 0 people found this review helpful.
KEPT MUD OFF SHOCKS
GLENN in MA
Comments On Jan 06, 2011:GOOD PRODUCT WOULD BUY AGAIN
Was this review helpful?
0 of 0 people found this review helpful.
2008 Kx250F alot of modification required to fit.
casey in UT
Comments On Oct 07, 2010:Purchased for 2008 Kx250F and they where not even close to fitting, holes didnt line up (had to drill them out oblong shape) and the third hole I had to cut it open and stick a bolt in it for looks. Also the width was to narrow for the forks not to rub badly. I have purchased these in the past for other bikes and fit was perfect, they just missed on this model and year.
Was this review helpful?
0 of 0 people found this review helpful.
looks good fit great
anthony in MI
Comments On Nov 09, 2010:they worked great fit well.
Was this review helpful?
0 of 0 people found this review helpful.
Lower Fork Covers
Luke in NSW
Comments On Oct 05, 2010:Great Fit, no mucking around. FYI they don't accomidate the Speedo Cable
Was this review helpful?
0 of 0 people found this review helpful.
They Fit Like They Should
Jason in AZ
Comments On Aug 23, 2010:It's not uncommon for the installation of aftermarket plastics to be an exercise in elongating holes so that fasteners will fit. Not so with these - at least in the case of my YZ250.
Was this review helpful?
0 of 0 people found this review helpful.
Looks great and fit like the stock parts.
GENE in WV
Comments On Aug 06, 2010:Bought this just to change the color from stock white to black.
Was this review helpful?
0 of 0 people found this review helpful.
Acerbis Lower Fork Cover Set
COSTIC in PA
Comments On Aug 02, 2010:Form fit and fuction excellent.
Was this review helpful?
0 of 0 people found this review helpful.
Great Product
Daryl in UT
Comments On Jun 19, 2010:I bought these for my KX250 and they fit perfectly; the plastics are very good quality.
Was this review helpful?
0 of 0 people found this review helpful.
Works well!
Jacob in SD
Comments On Jun 14, 2010:Keeps most dirt out
Was this review helpful?
0 of 0 people found this review helpful.
WR 450f 2003
Trevor in CA
Comments On Apr 05, 2010:they mounted right up and look great.
Was this review helpful?
0 of 0 people found this review helpful.
Nice replacement for stock.
Mark in IN
Comments On Feb 19, 2010:The guards went on quick. Fit and look like stock, probably because the stock ones are also Acerbis.
Was this review helpful?
0 of 0 people found this review helpful.
new is always good
SANTANA in NV
Comments On Feb 08, 2010:keeps your bike looking good. fits great
Was this review helpful?
0 of 0 people found this review helpful.
Terrible fit on my 08' KX 450F
ROBERT in NM
Comments On Jan 18, 2010:Got two pairs of black fork guard for my 08' KX 450F. Fit was terrible!
Was this review helpful?
0 of 0 people found this review helpful.
These Fit great and do the job.
SPENCER in TN
Comments On Jul 26, 2009: So you come to rocky mountain and BAM you've got the best prices on the net or the world for that matter.Thanks RM for your awesome Customer service,and great prices.These lower fork guards are perfect fit and do a great job,on my 2001 KTM200EXC.
Was this review helpful?
0 of 1 people found this review helpful.
not all there
Rebecca in IN
Comments On Apr 15, 2009:did not come with the rings but all in all ok
Was this review helpful?
3 of 3 people found this review helpful.
Nice Looking, Terrible Fit
Anthony in AZ
Comments On Jan 28, 2009:These look really nice and seem to be made of the same material as OEM. The fit was terrible on my 08 KX250f. I had spend about an hour stretching them out to get the holes to line up. What a hassle!
Was this review helpful?
0 of 0 people found this review helpful.
great stock replacement
matthew in FL
Comments On Jan 26, 2009:This fit perfectly on my 06 yz250f. no complaints at all.
Was this review helpful?
3 of 3 people found this review helpful.
Does its job
Melynda in ID
Comments On Aug 18, 2008:They looked really good but I had to take the rating down one because they were hard to put on being new. I had to really force them to bend around the forks and busted my knuckles in the spokes. After being put on twice, they slip right on.
Was this review helpful?
Stay Connected!
© 2013 Rocky Mountain ATV, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, or editorial content without written permission is strictly prohibited. Prices are subject to change without notice.