Dyna Beads Applicator w/Spout

Customer Reviews for Dyna Beads Applicator w/Spout

Overall customer review score:

Showing All 18 Reviews

Return to Dyna Beads Applicator w/Spout Product Page

Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.

Customer Reviews

Dyna Beads Applicator w/Spout Reviews

Your review could win you a $100 or $500 gift card!

Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!

Write a review on this productWrite reviews on past items you've purchased
0 of 1 people found this review helpful.

Good Product

Lane in ID

Comments On Feb 28, 2013:These things work!

Was this review helpful?

1 of 1 people found this review helpful.

Best thing I have done

Michael in GA

Comments On Oct 26, 2012:Vastly improved ride since I installed these beads. It handles better as well.

Was this review helpful?

1 of 1 people found this review helpful.

Smooth ride

MATTHEW in IL

Comments On Sep 07, 2012:Helped smoothed the ride of my 2006 Yamaha FZ6. Worth the purchase to me.

Was this review helpful?

1 of 1 people found this review helpful.

Great Product

DALLAS in CA

Comments On Jun 13, 2012:Easy to use, easy to apply, takes all the vibration out.

Was this review helpful?

1 of 1 people found this review helpful.

Not bad

Catherine in NH

Comments On Jun 03, 2012:The applicator was very easy to use, was allittle worried about pouring to fast and getting the beads stuck in the tube so I spent about 10 mins getting 2oz into my back tire and about 3/4 through it I did go to fast and got them stuck, gave a quick squeeze and cleared the tube out. So what I found is if you get the beads close to the tip and squeeze the bottle the air Pressure will just blow them down into the tire as long as you have a good seal on the valve stem.

Was this review helpful?

1 of 2 people found this review helpful.

dyna beads applicator

Paul in ON

Comments On Apr 25, 2012:good product does what it should

Was this review helpful?

3 of 3 people found this review helpful.

Dyna Beads in front Dunlop

Harry in GA

Comments On Oct 21, 2010:I ride a 2002 Electra Glide and tried the beads for the first time. Even though I didn't have a ballance problem I noticed the vibritaion in the handlebars reduced to almost "0". I only put 2ozs. in the front. Next time I'll do 3ozs. in both front & rear.

Additional Comments On Jan 05, 2012:They work like magic. Only problem is getting those little round beads into the velve stem. It takes time but it's worth it. I've put 7000+ miles on my front tire of me 02 Electra Glide and when I replaced the tire I cut the old tube open to see if there was any damage to the tube. None! In fact you could reuse the old beads if you wanted to.

Was this review helpful?

3 of 3 people found this review helpful.

A Little Vibration

Clyde in CA

Comments On Nov 29, 2011:I have laced wheels on my 2001 Heritage Softail which we all know requires a tube. Well, you can't conveniently dump the beads while mounting the tire. You have to use the applicator to inject them into the tube. The hot tip is....use some form of vibration to allow the beads to flow with more fluidity through the valve stem. If you don't, they'll bind at the stem. I used an engraver, and just turned it on. I made sure it was just touching the wheel, valve stem and applicator tube all at the same time. A light steady flow of beads will dump right in. It took me about 10 minutes to dump 2 ounces. Nice & easy. Oh, and, I love em!!! Smoothe as silk to 105MPH. No need to go faster...Enjoy!!

Was this review helpful?

3 of 3 people found this review helpful.

Better than ever!

Allen in MI

Comments On Sep 03, 2011:Put on a new METZELER ME 880 on the rear and tried the Dyna beads...what a difference! The old 880 never rode this good! Took the lead off the front tire and installed Dyna Beads in that one too.
I'm a believer!!!!!

Was this review helpful?

1 of 2 people found this review helpful.

Work Well

Gary in PA

Comments On Aug 29, 2011:Works well

Was this review helpful?

1 of 1 people found this review helpful.

time saver

Matthew in PA

Comments On Aug 20, 2011:Saves a ton of time for tires wit tubes. To save more time, use this with an electric engraver on the valve stem.

Was this review helpful?

0 of 1 people found this review helpful.

Dyna Beads applicator

Bob in MO

Comments On Jul 18, 2011:Works okay. But a resourceful person can come up with other things that will work just as well

Was this review helpful?

1 of 1 people found this review helpful.

Works good.

Victor in FL

Comments On May 16, 2011:Does the job.

Was this review helpful?

2 of 2 people found this review helpful.

Works

Richard in PA

Comments On Mar 22, 2011:Head the instructions and go very, very slowly. Beads will back up in the stem if going to quickly.

Was this review helpful?

1 of 1 people found this review helpful.

Never use solid weights again!

Terrell in TX

Comments On Feb 17, 2011:Dyna Beads are a must when mounting a new tire. I am on my second set of tires with this product and from mile 1 until they are burnt up, You will notice how smooth it is. As the tire wears, the Dyna Beads move around and adjust the balance dynamically.

Was this review helpful?

0 of 1 people found this review helpful.

fast ship

RITA in TN

Comments On Dec 13, 2010:i order items for hubby and he was excited to find this in your catalog;

Was this review helpful?

1 of 1 people found this review helpful.

Dyna Beads Applicator

Mark in IA

Comments On Nov 30, 2010:Works pretty well, the beads sometimes clog up but you just have to tap a little bit to get them flowing smoothly again.

Was this review helpful?

3 of 3 people found this review helpful.

Dispenser port too narrow right out of the box.

William in SC

Comments On Jul 26, 2010:Just replaced my OEM tires and decided to switch to dyna beads for wheel balancing. Used a postal scale to measure out the proper amount of beads to install in the tires. The problem is that right out of the box the applicator's port or hole is too narrow for more than one or two beads at a time. Very time consuming. I tried to open the port by inserting a larger diameter wire and working the port. But it really didn't work. So, using a pair of flush cutters I cut off between 1/16" to 1/8" of the tip and ta da. The beads began to flow easily. If your going to make the switch to dyna beads, I highly recommend this product.

Was this review helpful?