Polaris Lock & Ride Pro-Fit Half Windshield Installation - Ranger 900XP Video

If you cannot see the videos you may need to upgrade Adobe Flash Player. Upgrade Upgrade Flash Player

Polaris Lock & Ride Pro-Fit Half Windshield Installation - Ranger 900XP

Our informative video will walk you through installation of the Polaris Lock & Ride Pro-Fit Half Windshield on the Ranger 900 XP. Rocky Mountain ATV/MC is your online information source for several online videos that provide step-by-step instructions. Trust us to have the answers and instructions you need – every time.

Transcription:

This video covers the installation of the Polaris Lock & Ride Pro-Fit Half Windshield on the Ranger 900 XP. We're only going to need 2 tools for this installation: Those are a 14-millimeter T-handle and a flat-blade screw driver.

The first thing that we need to do is remove the 2 pop rivets in the middle of the dash; we do that with our flat-blade screwdriver. Once we get those out of the way, we're going to replace those with the supplied spacers and bolts. Those are just going to thread in, so go ahead and tighten those down. We're using our 14-millimeter T-handle to do that. Once we have those snugged up, we can go ahead and put the windshield into place.

Now we're going to align the windshield with the front frame, set that into place. The 2 tabs on the bottom of the windshield are going to snap on to the post that we just barely mounted. Now that we've got those snapped into place, the last step is just to rotate both clamps around the front frame bars to lock the windshield into place. We'll do that to both sides, and then we're done.

Come and check out all of our other UTV parts and accessories at RockyMountinATV.com. Thanks for watching.