Rob in IL
Another top notch product from K&N for us riders. The filter is such a critical part given you take in any sand or dirt and your motor and pay-check meet. I strongly suggest using an outerwear sock on any K&N. One issue is that the airbox on my 1999 and 1995 CR250s are really tight with this filter and the gold "bling bolt" won't work for you here. The grease is best applied to both parts of the mating surfaces of the filter and filter mount since you have to twist it into place and possibly miss a spot if you dont. re-jetting is mandatorty as this will breathe so much better than a stock filter so order the proper jets at the same time. (factor in your pipe too) I won't use anything else since K&N was on my 95 CR and it was a night and day difference. They cost more but this is an example of you get what you pay for! Trim the ears on the stock filter bolt and your install will be a lot less of a fight. The only draw-back is they are ridgid framed but that's the least of your problems. You can't go wrong here.Read All Reviews
Thomas in NY
1. The center grommet is the wrong diameter and does not fit the filter cage. Can't thread the thumb screw on because of this. 2. bad seal. Honda filter part is WAY better. It has a rubber gasket that seals 100% around the perimeter. This part is just a foam pad. The bike is NOT designed for this part. You need the rubber seal. 2006 CRF250XRead All Reviews
We carry a large selection of air filters, oil filters and fuel filters as well as all the necessary filter maintenance items at great prices.