Donald in AZ
The grease tube split at the seam which seems to be a common thing these days with multiple items of this type that I have used (some related others not). No problem, just slipped it into a sandwich bag to keep the mess down. You will need a traditional filter cleaner when transition from petroleum based to bio based filter oil so plan on having something strong on hand for the initial wash if using the old stuff. Once setup with the new stuff the cleaner works as advertised, is fairly quick and painless. Much less of a mess than dino oil. Application of the bio oil is a bit messy. I started using a 1 gallon zip lock bag to reduce the mess and save some filter oil. Drop the filter in the bag, add some oil, seal, massage around to cover the filter. Then pop the bag open and squeeze out excess back into the ziplock bag. Press out the air and save for the next re-oil session. This is the green oil with the water based (vs alcohol) carrier so dry time takes longer. I usually put it back on the filter frame, and back on the bike. Then leave the door open overnight to allow the water carrier to flash off. Close the door the next day and you are good to go. If doing filter changes between motos or whatever you had better have a backup that you can rotate in due to the dry times. No issues with the backfire screen removed and another brand's filter. Likely removes one of the two flammable risks. Will swap out filters to the notoil one when this one wears out to get the additional flame resistance as final insurance.Read All Reviews
Mark in WA
Liked having it on my 400ex, wish I could get one for my 01 CR250R.Read All Reviews
We carry a large selection of Dual Sport motorcycle air filters and oil filters as well as all the necessary filter maintenance items at great prices.