Choose a vehicle:

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

» Log in to use your Rider Profile Machines
Pivot Works Shock Bearing Kit
  • View Larger
  • Videos

Customer rating on this product:

Read reviews (21) | Write a review

Sales Live Chat

Pivot Works Shock Bearing Kit

Select type, make, model and year above

  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live chat: Click here (Leave email if after hours)
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)

  • Shock bearing kits include two teflon spherical bearings (cup bearings when applicable) and four seals for the repair of upper and lower eye of the rear shock.

Pivot Works Shock Bearing Kit Reviews

Your review could win you a $100 or $500 gift card!

Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!

0 of 0 people found this review helpful.

Little to much play for my liking

Comments On Apr 14, 2014:These bearings seemed to have a lot of play even when they were installed right out of the box. Also the top shock bearing would not fit unless I rounded it off a little. Will not buy these again not worth the hassle.

Was this review helpful?

0 of 0 people found this review helpful.

great product

Comments On Mar 23, 2014:better price and quality than oem

Was this review helpful?

0 of 0 people found this review helpful.

Wear very fast

Comments On Dec 11, 2013:I only had them in the bike for 2 track rides and started loosening up

Was this review helpful?

0 of 0 people found this review helpful.

no problems with this kit!

Comments On May 28, 2013:if installed properly, with a press not a hammer and socket, these bearings work great! I used these on my yz250f. I've seen a few reviews saying there was still slop after installing. yamahas pre 09 do inherently have a couple mm of play that comes from the design of the link and pivot, I've owned and worked on enough of these bikes to know that's just how they are. it's not the shock bearing!

Was this review helpful?

0 of 0 people found this review helpful.

Decent, not great.

Comments On Feb 05, 2013:I think the stock parts have tighter tolerances.

Was this review helpful?

0 of 0 people found this review helpful.

As good as OEM.

Comments On Oct 30, 2012:As good as OEM.

Was this review helpful?

0 of 1 people found this review helpful.

not impressed

Comments On Oct 06, 2012:After already purchasing a set of Pivot Works Shock Bearing earlier in the year i was very pleased with the quality. But this next set i received are completely worthless. As soon as the shock was on the bike and tightened up there was more slop and play in the shock than i had before i replaced the old bearings without even riding it yet. I dont think i will ever purchase another Pivot Works Bearing and am very dissappointed with the quality of the bearings. I will not reccomend Pivot Works Bearings to anyone .

Was this review helpful?

0 of 0 people found this review helpful.

Great product

Comments On Sep 05, 2012:just as good as oem

Was this review helpful?

1 of 1 people found this review helpful.

Complete Junk

Comments On Dec 01, 2011:If you are reading this review and are planning on buying any bearings from Pivot Works, DO NOT!!! The top shock bearing "designed" for a 2005 CRF-450 did not even come close to fitting. You could press it in to the shock body with your fingers and the design of the bearing was so off it would not allow the clip to go back in to the shock. The seals did not fit either and the bottom needle bearing race design is off on one side and will not allow the washers to glid smoothly. There is another review on this site descibing the same problems I am having. I also got a Pivot Works shock bearing kit for a 2007 KTM 300XC, and the seals were not the correct size. The customer service at Pivot Works sucks. I feel aftermarket parts should meet or exceed OEM specifications, and the products from Pivot Works are not even close to OEM. Save yourself the hassles and buy OEM.

Was this review helpful?

0 of 0 people found this review helpful.

yz 85

Comments On Nov 03, 2011:intalled on a yz 85 works great

Was this review helpful?

If you cannot see the videos you may need to upgrade Adobe Flash Player. Get Adobe Flash Player


How To Change Wheel And Engine Bearings

Frequent Buyer ProgramParts Finder