- ATV
- ATV Accessories
- Fuel and Air Intake Systems
- Intake
Thunder Products Dial-A-Jet
Thunder Products Dial-A-Jet
Fits: 1984 HONDA ATC 200S
Part# 1094280002
"Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."
-Dan Thomas, CEO and Founder
Returns
We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.
Warranties
We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.
Have questions?
Live chat: Click here (Leave email if after hours)
Email:sales@rockymountainatv.com
Call us: 1 800 336-5437
7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)
Special Notes:
- Customer must purchase the Snorkel kit to work with the Dial-A-Jet part #1094540001.
- Must purchase the Snorkel kit to work with the Dial-A-Jet, part #1094540001.
- Dial-A-Jet is a completely external jetting system that delivers maximum horsepower from any engine at any temperature or altitude. Dial-A-Jet improves throttle response and fuel mileage. It works well with stock or modified engines, standard or high performance air boxes and exhaust systems.
- Works by taking fuel from the float bowl and mixing it with air creating emulsified fuel. The emulsified fuel is delivered to the engine instantly and acts as an intermediate circuit until the heavy wet fuel from the other circuits catch up. The emulsified fuel charge, fills in the lean spots between the poorly atomized fuel molecules from other jetting circuits eliminating lean spots. The lightweight fuel charge follows the path of least resistance. This gives you a consistent, even fuel supply at all engine RPMs.
- Dial-A-Jet allows you to re-jet your entire engine in minutes. Allows you to tune each cylinder individually for maximum performance. Improves fuel efficiency 10% to 20% or more.
Thunder Products Dial-A-Jet Reviews
Your review could win you a $100 or $500 gift card! 
Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!
0 of 0 people found this review helpful.
Quick and easy install
Dave in CA – Machine this part was bought for: 2008 POLARIS OUTLAW 525 IRS
Comments On May 31, 2013:Works pretty well to make adjustments on the fly.
Was this review helpful?
1 of 1 people found this review helpful.
Something to TAME the BEAST!
DONALD in NV – Machine this part was bought for: 2004 KAWASAKI KFX 700
Comments On Mar 12, 2013:I have this system on all four of my quads, 2 Z-400s , Artic Cat DVX 300 and the Beast a KFX-700. I mainly run in the sand so we push em hard! The KFX-700 has been the hardest to jet as it has 2 carbs and is very thirsty. As stated this system WILL require some jetting changes but it is all for the better- now all i have to do to go from 4800ft run down to 2600ft run or at 800ft is turn the dial. The system does add power as it acts like an on command fuel injection when your motor needs it only, like when climbing a 500ft dune-killer.
Was this review helpful?
0 of 0 people found this review helpful.
Expensive
Ken in AZ
Comments On Jul 28, 2012:but beat disassembling your carb for jetting changes.
Was this review helpful?
0 of 0 people found this review helpful.
Dial a Jet
Ken in GA
Comments On Oct 02, 2011:Easy installation. I can tell the mid range is much better. My z400 pulls alot harder. Highly recommended. Must buy snorkle kit. Why not included ?
Was this review helpful?
1 of 1 people found this review helpful.
Seems flawed to me
MONTY in AB
Comments On Jun 05, 2011:In it's design it takes unfiltered air and mixes it with fuel and put the UNFILTERED air into the engine. They do offer the snorkel kit which they recommend for off road use...but a small piece of open cell foam doesn't seem like a great filter. Also depending on your carbs/intake system it may be VERY tricky to install. My Banshee was not as nice and easy as it would install on my Scrambler. I like the priciple...not the actual product. I eventually opted to NOT install the kit on my Banshee. I ride the foothills and felt the adjustability would be nice...but ultimately introducing UNFILTERED air into my engine seemed like engine rebuilds waiting to happen.
Was this review helpful?
0 of 0 people found this review helpful.
way better than jetting all the time
DAVID in OH
Comments On May 06, 2008:have a 660 raptor and it works great! this makes life simple since have 2 carbs to jet. change jets initially and never touch carbs again. just turn the dial a jet. makes alot of difference in bottom snap. Now runs like injected 700s.
Was this review helpful?
0 of 0 people found this review helpful.
Excellent Jetting Alternative
Neal in AR
Comments On Mar 11, 2008:If you're upgrading your quad with a pipe and a high flow filter and you need to re-jet just skip ahead to the Dial-A-Jet. This adds a ton of throttle responce down low. It's so easy to install you'll swear you missed a step.
Was this review helpful?
1 of 1 people found this review helpful.
pretty good
WAYNE in CA
Comments On Feb 26, 2008:It works but i would have to say its not a complete replacement for a jet kit as it only allows for more fuel to be delivered and cannot lean out the fuel mixture so if you do a lot of higher altitude riding its useless, I run it in conjunction with a fmf jet kit and it works quite well.
Was this review helpful?
0 of 0 people found this review helpful.
As advertized
Cody in UT
Comments On Feb 01, 2008:Works like it says it does. I really don't know why more people don't have these! I ride anywhere from 4500 ft to 10,000 ft and turning a dial is a lot easier than re-jetting all the time. Very straightforward install. Great product
Was this review helpful?
0 of 0 people found this review helpful.
quick install
ELIZABETH in MA
Comments On Jan 20, 2008:takes 30 minutes to install and a few laps to adjust. only makes a difference if you have a few engine mods. the snorkle kit is highly recommended.
Was this review helpful?
Stay Connected!
© 2013 Rocky Mountain ATV, Inc. All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, or editorial content without written permission is strictly prohibited. Prices are subject to change without notice.