Choose a vehicle:

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

» Log in to use your Rider Profile Machines
Magura Hydraulic Clutch
  • View Larger

Customer rating on this product:

Read reviews (39) | Write a review

Sales Live Chat

Magura Hydraulic Clutch

Our price: $238.99$267.99

MSRP: $335.00 - You save up to $96.01 (29% off)

View Product DetailsSee all machines the Magura Hydraulic Clutch fits.

Select type, make, model and year above

  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live chat: Click here (Leave email if after hours)
    Email:sales@rockymountainatv.com
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)

  • No more pressure point fading
  • Self adjusting
  • Up to 20% less lever pull required
  • Less maintenance

Magura Hydraulic Clutch Reviews

Your review could win you a $100 or $500 gift card!

Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!

0 of 0 people found this review helpful.

SO worth it

Comments On Jul 15, 2014:What a difference the hydraulic clutch pull makes - so much easier to ride trails all day. Butter smooth and easy to pull. Not hard to install, but not a 5 minute job.

Was this review helpful?

0 of 0 people found this review helpful.

Reduced Arm Pump

Comments On Jul 10, 2014:This clutch paired with a Midwest Mountain Engineering easy pull lever reduced my clutch pull tremendously. Definately less arm pump in my motos. Great buy if your stock cable pull clutch is heavy/stiff.

Was this review helpful?

0 of 0 people found this review helpful.

Nice upgrade from stock cable clutch

Comments On May 09, 2014:This is a nice mod to the bike. Lever actuation force went down about 30%, and the action is smooth and easy. Installation was tricky. The bike had an aftermarket clutch in it, and the stack height was slight different than the Yamaha OEM. This made it impossible to set the amount of pull play specified by Magura. Replaced the aftermarket clutch with the Yamaha OEM clutch, and everything lined up perfectly. The hydraulic tube is about 6 inches too long, and the slack causes the tube to arc up at the handlebars. Noticeable, but so far not a problem.

Was this review helpful?

0 of 0 people found this review helpful.

Fits my WR 450

Comments On Aug 18, 2013:Bought the clutch and installed it today. It all went in fine. The instructions are hard to understand. It took me a good hour id say. Just because i tried to fit it different ways. Does it make the clutch pull easier on the WR. No. I dont find it to be easier. I have heard the same thing from other WR owners with magura clutch. I will take it on a long ride soon and update. Short ride it did its job. Looking forward to consistent clutch pull when in trails.

Additional Comments On Aug 25, 2013:So i had to modify the mount a bit. The way it was sitting it bent the clutch puller a bit when fully engaged. So i bent it a bit towards the clutch actuator arm a bit. Works good now.

Additional Comments On Mar 17, 2014:If you decide to get this, the stock master cylinder is 10.5. for a WR 450. If you want easier clutch pull. Get a 9.5 master cylinder. Contact magura or your local dealer for more info.

Was this review helpful?

0 of 0 people found this review helpful.

Worth every penny!

Comments On Feb 14, 2014:I put off buying this setup for several years. I read reviews saying how well it worked, and others that said it did little to nothing to improve clutch action. The CR500 has a stiffer than average clutch pull and even with new cables, the clutch pull was difficult enough that 99% of the time I would just let it lug down to get through nasty rocky sections. Now, I can actually feather the clutch and ride with more finesse through these sections. Much less arm fatigue from pulling the clutch. I didn't do any before and after measurements, but there is no comparison. Wouldn't ride without it again.
I do think it could use a little more stroke. With everything adjusted all the way up, it still won't roll with the clutch pulled in, but once the engine is running, it works like butter.
I have been riding with this setup for a couple years now and have had no issues with it. If you have a bike that only requires one finger to actuate the clutch, this probably won't help any. If you ride a CR500, I would HIGHLY recommend this setup!

Was this review helpful?

0 of 0 people found this review helpful.

Worth the money smooth as butter

Comments On Jan 20, 2014:Just installed a Magura Hydraulic Clutch system on my crf250 and all I can say is wow. Smooth as butter and consistent pull all the time. Pull effort is half than a cable system. A unbreakable style lever would make the kit better.Just had to bend the stock bracket slightly and install went well

Was this review helpful?

0 of 0 people found this review helpful.

Not much better than the original cable...

Comments On Aug 24, 2013:Installation was very easy & only took about a half hour, however I am disappointed that this "upgrade" doesn't make the clutch any easier to pull in. The force required to pull the clutch in is the exact same as a fresh cable. The only two real positives is the clutch does have a consistant feel throughout the full pull/release of the clutch & the cool factor of have the hyd. clutch over cable, but thats just cosmetic. The money is better spent on other real upgrades!

Was this review helpful?

0 of 0 people found this review helpful.

amazing difference

Comments On Jul 16, 2013:installed in about five minutes and made my clutch feel amazing.. great product!!

Was this review helpful?

0 of 0 people found this review helpful.

Love the hydro clutch

Comments On May 17, 2013:much easier clutch pull. smooth and consistant. Has been very reliable. Would definitely buy again.

Was this review helpful?

2 of 2 people found this review helpful.

Won't fit correctly and vague instructions

Comments On Feb 09, 2013:I ordered the exact one for my model bike and it came with a cute little bracket along with the manual (which is the same for all bikes) and very vague in expalining anything. I'm sure it fits certain bikes easily but mine not so much. Instructions will tell you certain models will use the stock cable bracket and others will use new one along with telling you to bend them possibly to make the right angles. I tried to find a way to use the new bracket and it wouldn't work at all and the stock one would not leave enough free-play thus causing the clutch to be in constant pull and would overheat the bike even if the thing didn't slip too much. For the price of such an add-on i feel like they could print off a 2 dollar Machine-Specific instruction sheet and all neccesary brackets. I gave it 3 stars only because i know the gain i will get as far as endurance will outweigh the initial pains of getting it hooked up right.

Was this review helpful?

Frequent Buyer ProgramParts Finder