This is a "machine-selection optional" part.Please choose a vehicle to see products specific to your machine,select a product below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
Great deals on light kits, replacement light bulbs, spot lights and more.
Jonathan in WA
Great customer service from RYCO. I had one minor problem and the owner returned my call and took care of the problem within an hour or so.. The kit is very clever using stock headlight and taillight and includes a nicely done license plate bracket. I especially liked the LED turn signals with the rear signals flush mounted on the license plate bracket. The stator needed no upgrade on my 2012 since the kit was run off of AC. Check the RYCO website for applications of earlier WRs. Be aware you may need a second mirror for some states such as WA State. My WR passed its street certification first try in WA State.Read All Reviews
ryan in NL
Great little upgrade for those who do not want to bother with wiring in a lighting system. I just wanted enough light to see how to get the key in the ignition after dark. This little gadget does the trick. On the down side , the edges of the holder are very sharp and you could easily cut your fingers if handling without care. The maker should have considered coating with a rubberized product.Read All Reviews
Joel in TX
First of all, this part does what it needs to do, you mount it on your machine and mount the light bar to it. Seems pretty simple but it isn't. Apparently this was designed by an engineering intern on a tight deadline. The bracket is mounted with two screws and nuts. The thing is, there is no space to put a wrench or socket to hold the nut. They tried to put to tabs on each side to hold the nut but they are too far apart to hold it and too close to fit any sort of tool. I got around it by jamming a flat head screwdriver in between the tab and one of the flats on the nut. Then there is the tabs to attach the light bar, same problem here, they are placed in a way that its nearly impossible to use a tool to hold the nut. Keep in mind that your arms at this point are stretched over the roll cage holding the bar and at the same time trying to tighten this nut. In conclusion, it works but the design can use some improvement.Read All Reviews