Choose a vehicle:

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

» Log in to use your Rider Profile Machines

Please select make, model and year

Ignition Coils and StatorsIgnition Coils and Stators

Ignition Coils and Stators from Rocky Mountain ATV/MC

High quality ignitions, coils and stators for the powersport industry.

Latest Dirt Bike Ignition Coils and Stators Reviews – You could win up to $500 for reviewing products!

  • Big Gun Rev Limiter

    Big Gun Rev Limiter

    jim in AZ

    great product

    great product

    Read All Reviews
  • Trail Tech Complete Stator Kit

    Trail Tech Complete Stator Kit

    PAUL in MD

    Trail Tech Stator vs OEM Yamaha and Voyager GPS

    After installing a dual-sport Baja kit to my 2011 Yamaha WR450 and making the modification to the stock OEM stator, the OEM stator didn't last very long. So I chose the Trail Tech stator because of good reviews and I had purchased other Quality Trail Tech Dirt Bike Speedometers/Computers before, with good success. In the picture at this link you can see how much better the Tail Tech Stator is. Its the one of the right,. The Trail Tech is much beefier. https://www.youtube.com/watch?v=Xha0JmpI5Zg The real reason that I'm writing this review, is because after the Stator installation, a short was created . I finally located the problem in the original Baja kit. If you added a key switch, there is a blue wire between the Ignition Key (3 way plug) to the Middle harness (6 way plug). This wire caused the short. Note that the new Trail Tech stator comes with a Ignition Jumper which basically adds a single wire to the ignition from the new Trail Tech Regulator. So with the new Trail Tech Ignition wire installed and the blue wire mentioned above removed, the bike charges at a solid 13.7 volts. Even at a low idle and high beam on, it still charges at 12.5 volts or so. I also installed the Trail Tech Voyager GPS, which shows battery voltage and this is how I can monitor the performance of the new stator. The short described above caused me several hours of anguish and lots of 15A fuses. So I hope this helps you!

    Read All Reviews
  • Lexx Power Module

    Lexx Power Module

    Nick in IL

    Does its job!

    Does what it's supposed to do on a budget!

    Read All Reviews
  • KTM Keyed Ignition Eliminator Plug

    KTM Keyed Ignition Eliminator Plug

    Wayne in FL

    Cool way to get rid of your keyed ignition.

    Installed this plug to remove my keyed ignition (always thought it was in a weird place). Now just use the kill switch. Flip it on and nothing happens til you touch the starter button. Flip off and just the light stays on for a few seconds then shuts down. Super easy install and shave a few ounces.

    Read All Reviews
  • Tusk Engine Starter Switch

    Tusk Engine Starter Switch

    Patman in KS

    Perfect replacement part

    I bought this to replace a broken starter button. The fit and finish look just like the factory button. After running it for a summer it's still running strong. Great product from tusk.

    Read All Reviews
  • KTM Ignition Curve Map Switch

    KTM Ignition Curve Map Switch

    Rui in NH

    Easy access to you KTM's engine maps.

    The KTM ignition map switch is a nice and easy way to access you bikes pre programed engine maps. I first used it as a safe way to brake in my engine by running map #2 which is a more tame engine curve. After the brake in period I started to try both maps on the different track I've been running on. Some people say that they don't notice the difference between the maps. But I can feel them very clearly! This is a great product. I only wish that this came equipped on the KTM's from factory cause its alittle pricey.

    Read All Reviews
Frequent Buyer ProgramParts Finder