Please select make, model and yearAxles
Off road axles at the best price and selection available.
JORDAN in TX
Ordered this for a 660 raptor and it fit inside the swingarm just fine and the finish is great but the "universal" instructions are useless and you cannot use the OEM locknuts in the same configuration. You just have to make something up. When I finally figured out a suitable way to get the locknut on I went for on my first ride and bent the axle in less than 2 hours. The stock axle lasted longer! The durable website says that this axle is not for jumping but i didnt think 3 or 4 feet was pushing it but apparently this axle was never designed to leave the ground. Dont buy if you do any thing more than trail riding.Read All Reviews
Timothy in NY
I've been running these on my YFZ450 for two summers at a local MX track and they have basically been flawless and add great stability in the back with the wider stance. The only thing you must be CERTAIN you do, is take the wheels off and re-tighten the nut holding them on after you ride the first couple of times. It will loosen up a bit and could cause failure if you don't. I honestly rode about 2-3 times before I re-tightened mine and it was definitely a bit loose. Been great ever since then. Would definitely buy again and CHEAP.Read All Reviews
Travis in IA
Item was machined flawless fits perfect. Best part about it is the lip on the spacer keeps the wheel perfectly centered. id recommenced these to everyone. One heads up if your machine has steel wheels like mine did you need longer wheel studs otherwise your not gonna have enough threads on the lug nut and they will strip. For the polaris machines like the sportsman I used the studs off a machine with aluminum wheels example is a 06 sportsman 800, polaris part # 7518378. They are .26 longer just over a 1/4 inch worked perfect!!!!Read All Reviews