Yamaha GYTR WR Air Induction System Removal Kit

Customer Reviews for Yamaha GYTR WR Air Induction System Removal Kit

Overall customer review score:

Showing All 6 Reviews

Return to Yamaha GYTR WR Air Induction System Removal Kit Product Page

Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.

Customer Reviews

Yamaha GYTR WR Air Induction System Removal Kit Reviews

Your review could win you a $100 or $500 gift card!

Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!

0 of 0 people found this review helpful.

This kit is pretty good

Michael in TX – Machine this part was bought for: 2007 YAMAHA WR450F

Comments On Oct 14, 2015:I like that this kit has everything you need already in it. Needle, Jets, smog cap, etc. The instructions could use a little work, but it wasn't too hard to figure out. I would have liked hex head bolts for the block off plate. The inside allen bolt was hard to tighten down fully due to spacing and required me to move the right side radiator slightly. Changing anything in the carbs is a pain on this bike due to the frame. One thing to note, the main jet and pilot jet were rich for me here in Houston near sea level. Through research on several forums for WR450's, it's pretty common to use a 168 - 170 main and 48 pilot outside of the mountains. I'm currently at 168 / 48 with the needle and other jets from this kit and the bike runs great.

Was this review helpful?

0 of 0 people found this review helpful.

Just what I needed!

Alex in ME – Machine this part was bought for: 2011 YAMAHA WR450F

Comments On Jul 18, 2015:Needed for uncorking the WR450.

Was this review helpful?

0 of 0 people found this review helpful.

Huge Improvement

Geoff in CA – Machine this part was bought for: 2007 YAMAHA WR450F

Comments On Feb 22, 2015:Made all the difference in the world, if you own a wr you need this kit to wake it up!

Was this review helpful?

0 of 0 people found this review helpful.

AIS removal kit

Trevor in UT – Machine this part was bought for: 2007 YAMAHA WR450F

Comments On Jul 15, 2014:Yes, this kit did exactly as described. The added leak jet is a great addition as well.

Was this review helpful?

0 of 1 people found this review helpful.

Does Not Plug The AIS Feed Pipe

David in IN – Machine this part was bought for: 2012 YAMAHA WR250F

Comments On Jun 26, 2014:After receiving this part, I ended up using only the air cleaner vacuum plug and the YZ throttle screw. The AIS feed pip gasket, plug, hose clamp did not seal even after following the directions of re-tightening the hose clamp after letting the bike cool down. I ended up welding the stock AIS feed pipe shut. After 4 hard trail rides, this has worked for me.
Happy Riding !!

Was this review helpful?

1 of 1 people found this review helpful.

Does What it's Supposed to

Kyle in OR

Comments On Sep 25, 2012:This kit does exactly what it says it does: allows you to remove the AIS from your bike.

Was this review helpful?