Acerbis Full Plastic Kit

Customer Reviews for Acerbis Full Plastic Kit

Overall customer review score:

Showing All 61 Reviews

Return to Acerbis Full Plastic Kit Product Page

Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.

Customer Reviews

Acerbis Full Plastic Kit Reviews

Your review could win you a $100 or $500 gift card!

Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!

0 of 0 people found this review helpful.

Quality is top notch and the fit was perfect.

Brad in GA – Machine this part was bought for: 2015 KTM 300 XC

Comments On Apr 20, 2016:I wanted to install a full graphics kit on my KTM 300 and that made me decide to buy a complete plastic kit to install it on instead of over the top of the stock KTM graphics. The Acerbis kit worked perfectly. The fit was precise.
The toughest part is drilling out the rivets on the stock airbox to move the retaining clips without wrecking them. You can just buy new OEM clips and rivets from RMC for under $4.00 so I'd highly recommend you go that route since that keeps your stock airbox usable too.

Was this review helpful?

0 of 0 people found this review helpful.

Good kit but no airbox covers

Albert in ID – Machine this part was bought for: 2013 HONDA CRF450R

Comments On Mar 29, 2016:Fit was good. Did not rate higher because there were no airbox covers. Otherwise it would be a 4 or 5 star.

Was this review helpful?

0 of 0 people found this review helpful.

White honda

Jon in NC – Machine this part was bought for: 2015 HONDA CRF250R

Comments On Mar 08, 2016:Break away from the crowd with this easy upgrade fits great

Was this review helpful?

0 of 0 people found this review helpful.

Full plastic kit

Paul in MD – Machine this part was bought for: 2013 KAWASAKI KX250F

Comments On Feb 19, 2016:This is a great kit for the price. The only issue I had was the side panels didn't fit that well where they meet the rear fender.

Was this review helpful?

0 of 0 people found this review helpful.

worked great

james in MD – Machine this part was bought for: 2012 KTM 150 SX

Comments On Feb 17, 2016:it all work great

Was this review helpful?

0 of 0 people found this review helpful.

Awesome!

Joshua in CA – Machine this part was bought for: 2009 KAWASAKI KX250F

Comments On Feb 10, 2016:Does the job and great price

Was this review helpful?

0 of 0 people found this review helpful.

Tremendous Value

JEFF in MO – Machine this part was bought for: 2015 HUSQVARNA FC 350

Comments On Feb 06, 2016:Compared to the factory plastic, or buying items piece by piece, it's a great deal to buy the whole kit. Plus, it''s very handy to have extras ready to mount rather than have to wait for the order to arrive or make a run down to the dealer. Acerbis stuff has the factory finish and fits perfect.

Was this review helpful?

0 of 0 people found this review helpful.

plastic kit

CRAIG in PA – Machine this part was bought for: 2011 KAWASAKI KX250F

Comments On Feb 04, 2016:good fit made the bike look new, no complaints

Was this review helpful?

0 of 0 people found this review helpful.

Great fit!

Steven in ND – Machine this part was bought for: 2009 KTM 250 XCF-W

Comments On Feb 02, 2016:Fit just like the stock ktm acerbis plastic.

Was this review helpful?

0 of 0 people found this review helpful.

Looking new

Tracee in CA – Machine this part was bought for: 2013 KTM 450 XC-F

Comments On Jan 30, 2016:Nice fit and look

Was this review helpful?

0 of 0 people found this review helpful.

Really Good

Jeffrey in NY – Machine this part was bought for: 2012 KAWASAKI KX450F

Comments On Jan 31, 2016:I gave it five stars because I got my green Kawi changed to white, which is super cool. All plastics lined up perfectly to gas tank, triple clamp and frame bolt holes.

Was this review helpful?

0 of 0 people found this review helpful.

5

Anthony in IN

Comments On Jan 29, 2016:Fit good, OEM quality

Was this review helpful?

0 of 0 people found this review helpful.

Packaged and fit well

Dennis in CA – Machine this part was bought for: 2015 KTM 65 SX

Comments On Jan 27, 2016:Great fit and Finnish, well packaged so no scuffs as seen with other plastics I have ordered

Was this review helpful?

0 of 0 people found this review helpful.

Good fit like it

David in RI – Machine this part was bought for: 2011 KAWASAKI KX450F

Comments On Jan 14, 2016:4 stars like it

Was this review helpful?

0 of 0 people found this review helpful.

Good fit like it

David in RI – Machine this part was bought for: 2011 KAWASAKI KX450F

Comments On Jan 14, 2016:4 stars like it

Was this review helpful?

0 of 0 people found this review helpful.

Looks great

Shane in ID – Machine this part was bought for: 2008 SUZUKI RMZ450

Comments On Dec 29, 2015:Good fit and looks good

Was this review helpful?

2 of 2 people found this review helpful.

Not a full kit

Michael in Montana – Machine this part was bought for: 2015 HONDA CRF450R

Comments On Dec 06, 2015:The fitment of the plastic was industry standard. It reads in its name Acerbis full plastic kit. Not so, its missing the two side air box covers. These are not little pieces either. Do not know why they are not included. Kind of frustrating now I have to go back and order them and wait to put my bike back together.
TECH NOTE : BEFORE ORDERING PLEASE REFER TO THE PRODUCT DETAILS TO SEE KIT CONTENTS.

Was this review helpful?

0 of 0 people found this review helpful.

Side Panels and Rear Fender do not fit well

Andrew in CA – Machine this part was bought for: 2015 KAWASAKI KX450F

Comments On Dec 04, 2015:Front fender, shrouds, and number plate fit/look fine - rear end of the bike is a different story - the side panels and rear fender bolt up fine but the intersection of the side panels and rear fender is fairly sloppy. Additionally, mold lines can be seen on the outside of most parts. Okay kit if you're on a budget... next time I'll buy OEM.

Additional Comments On Dec 09, 2015:Just a quick update - I had not installed the fork guards until last night - pretty poor fit as the bolt holes did not line up. Lots of heat gun and forcing and they made it on - one tip - don't install the aluminum spacers into the plastic holes before installing the fork guard. Use the Aluminum spacer like you would a washer and pre-thread as much of the M6 bolt on as possible. Sandwich the spacer in when you tighten the M6 bolt further and you will have a better installation experience.

Was this review helpful?

0 of 0 people found this review helpful.

good fit

geoff in NB

Comments On Dec 01, 2015:no fuss installation

Was this review helpful?

0 of 0 people found this review helpful.

Plastics

David in CA – Machine this part was bought for: 2014 KAWASAKI KX450F

Comments On Nov 03, 2015:Only thing I was bummed on was it came with a black number plate. Stock on mine was white.

Was this review helpful?

0 of 0 people found this review helpful.

terrible fit

Jeremy in OH – Machine this part was bought for: 2009 KAWASAKI KX450F

Comments On Sep 16, 2015:This plastic looks good in the box but not one piece of this plastic kit lines up to the bolt holes on my bike. I'm not sure of the other brands fit but they cant be any worse than this one so buy something else. Also don't make the mistake I made and put all the graphics on it before putting it on the bike so you can send them back.

Was this review helpful?

0 of 0 people found this review helpful.

Plastics

Jeff in ID – Machine this part was bought for: 2010 YAMAHA YZ250F

Comments On Sep 09, 2015:They fit up great and came with a bunch of sweet stickers. had new graphics put on them and was really happy with the quality and durability. no stress marks on the blue yet and ive had them for 2 years

Was this review helpful?

1 of 1 people found this review helpful.

Very high quality

Tim in MI – Machine this part was bought for: 2012 KTM 350 XC-F

Comments On Jul 21, 2015:Nice kit if you want to really make your bike look new, all original colors. The fit of these parts is as good as the oem plastic.

Was this review helpful?

0 of 0 people found this review helpful.

Good plastic

Kolton in UT – Machine this part was bought for: 2013 KAWASAKI KX450F

Comments On Jun 10, 2015:Way cheaper than OEM, and just as good.

Was this review helpful?

0 of 0 people found this review helpful.

looks good

Mario in AK

Comments On Apr 21, 2015:looks just like the stock plastics look, and fitment is perfect.

Was this review helpful?

0 of 0 people found this review helpful.

excellent product

ERIC in WV

Comments On Apr 05, 2015:well made, great product

Was this review helpful?

0 of 0 people found this review helpful.

STACY IN OK

STACY in OK

Comments On Mar 17, 2015:GREAT KIT, FITS BIKE WELL

Was this review helpful?

0 of 0 people found this review helpful.

Great Plastic on a budget

steve in PA – Machine this part was bought for: 2014 HONDA CRF450R

Comments On Mar 10, 2015:excellent quiality, great price, super fit

Was this review helpful?

1 of 1 people found this review helpful.

Looks good

Nick in NV – Machine this part was bought for: 2013 KTM 250 SX

Comments On Mar 04, 2015:The product looks great but the fit of the air box and air box cover are not good. Other than that is works well.

Was this review helpful?

0 of 0 people found this review helpful.

Poor Quality Product

Stephen in ME – Machine this part was bought for: 2009 YAMAHA YZ125

Comments On Feb 26, 2015:I sent this kit back.....the front fender was was deformed. The front tip of the fender was bent downward and was very flimsy.....This stuff is very low quality. I have found Acerbis to be very hit or miss depending on the bike, it is a gamble when you buy this brand. OEM is worth the extra cost for sure.

Was this review helpful?

0 of 0 people found this review helpful.

GOOD PLASTIC FOR THE MONEY

Taylor in OK – Machine this part was bought for: 2011 YAMAHA YZ250F

Comments On Mar 01, 2015:Fairly pleased with them. Do not fit quite as well as OEM plastic, but it's nothing to throw a fit about, serve their purpose very well. Would suggest everyone buys an extra set of nuts and bolts, usually $15 at you local shop. Some of the plastic needed slightly longer bolts to reach and snug up. Would definitely recommend this set, if I did not tell you they were after market, you would never know.

Was this review helpful?

1 of 1 people found this review helpful.

Not the best fitting plastic

Seth in PA – Machine this part was bought for: 2014 KTM 300 XC

Comments On Jan 26, 2015:Everything eventually went on and works, that's about the best of it. You would think the rest of plastic would line up with there own airbox, but that is not the case. Bolt holes didn't line up for the seat or side mounts, I had to grind down slots for the airbox cover to get it to even fit into place and it still won't stay with just the snaps. I ended up having to bolt it in place. Got 3 stars because of cost, much cheaper then OEM so I guess the compromise in quality was to be expected. Looks good once installed just makes me upset that I had to modify the airbox to much to make it work.

Was this review helpful?

0 of 0 people found this review helpful.

Perfect color and fit

Federico in FL – Machine this part was bought for: 2011 KAWASAKI KX250F

Comments On Jan 26, 2015:It fits perfectly and it has the same color as the OEM plastics. Great quality. Would buy again.

Was this review helpful?

0 of 0 people found this review helpful.

Cant beat them

Robert in VIC – Machine this part was bought for: 2015 KTM 250 SX

Comments On Jan 16, 2015:I've lost count on how many kits of Acerbis plastics I have purchased, can't beat them for quality!!!

Was this review helpful?

0 of 0 people found this review helpful.

Good buy for the money

Troy in MT – Machine this part was bought for: 2009 KAWASAKI KX250F

Comments On Jan 10, 2015:Plastic had to be forced a little to get things to fit right but a great replacement for the broken oem plastics i had.

Was this review helpful?

0 of 0 people found this review helpful.

Fits Great

Doug in CA – Machine this part was bought for: 2012 YAMAHA YZ450F

Comments On Nov 05, 2014:No issues. Probably the best plastic out there.

Was this review helpful?

0 of 0 people found this review helpful.

About as good as it gets for aftermarket

clint in OR – Machine this part was bought for: 2012 YAMAHA YZ450F

Comments On Sep 02, 2014:OEM plastics fit better but cost more. This is an excellent option if your trying to save a buck and don't mind a little "Adjusting".

Was this review helpful?

0 of 0 people found this review helpful.

Don't scratch my fender.

Shane in OR – Machine this part was bought for: 2012 HONDA CRF250R

Comments On Aug 20, 2014:Good fit.

Was this review helpful?

0 of 0 people found this review helpful.

Everything you would expect

Matthew in UT – Machine this part was bought for: 2011 KAWASAKI KX450F

Comments On Aug 03, 2014:This plastic kit was everything that it should have been. They look good and the bolt holes all lined up nice.

Was this review helpful?

0 of 0 people found this review helpful.

No issues

Christopher in MD – Machine this part was bought for: 2011 KAWASAKI KX250F

Comments On Jul 24, 2014:All the pieces are dead on accurate for a great fit. My previous bike (2009 KX250F) also had the Acerbis full plastic kit and those also fit perfect.

Was this review helpful?

0 of 0 people found this review helpful.

plastics

kevin in AB

Comments On Jun 17, 2014:very good item bolt right up

Was this review helpful?

0 of 0 people found this review helpful.

Good product

Wes in ID – Machine this part was bought for: 2014 KTM 300 XC

Comments On May 25, 2014:I think the plastic kit was pretty good. I had some minor issues with fitment. The pieces need just a little triming with a razor blade to fit properly. That said, its the best kit I have bought for any bike I have owned.

Was this review helpful?

0 of 0 people found this review helpful.

WORKS WELL

jason in MN – Machine this part was bought for: 2009 KAWASAKI KX450F

Comments On Mar 19, 2014:LOOKS GOOD ,FITS GOOD

Was this review helpful?

0 of 0 people found this review helpful.

plastics

Brandon in IN – Machine this part was bought for: 2011 YAMAHA YZ250F

Comments On Mar 13, 2014:I received these plastics in exactly 3 days in perfect condition for 70$ cheaper than anywhere else. I'm definitely only shopping here for my parts now.

Was this review helpful?

0 of 0 people found this review helpful.

great looking plastic

john in PA – Machine this part was bought for: 2012 YAMAHA YZ250F

Comments On Mar 05, 2014:Fit well no problems at all , made bike look fresh again. Would definitely recommended.

Was this review helpful?

0 of 0 people found this review helpful.

Fit Perfect

Glenn in MO – Machine this part was bought for: 2012 KAWASAKI KX250F

Comments On Feb 12, 2014:Perfect fit, painless install.

Was this review helpful?

0 of 0 people found this review helpful.

Great product

Michael in PA – Machine this part was bought for: 2012 KTM 250 XC-F

Comments On Jan 17, 2014:This is a great kit that comes with every piece of plastic for the ktm including the airbox. Fit and finish are both excellent.

Was this review helpful?

0 of 0 people found this review helpful.

Great Fit

Brandon in NC – Machine this part was bought for: 2012 KTM 350 EXC-F

Comments On Jan 15, 2014:Comes with all the plastics incluing the battery box. Great fitment and looks sick with new graphics.

Was this review helpful?

1 of 1 people found this review helpful.

good for the price

Codi in Utah – Machine this part was bought for: 2009 HONDA CRF450R

Comments On Jan 03, 2014:Only downfall is the kit does not come with the upper side panels like it says. All in all great fit and look good for the price

Was this review helpful?

0 of 0 people found this review helpful.

Acerbis complete Plastic Kit

FELIX in CO – Machine this part was bought for: 2008 YAMAHA YZ250

Comments On Jan 04, 2014:The plastic is easy to install and so far it is durable.

Was this review helpful?

1 of 1 people found this review helpful.

Good but takes some fiddling to fit

Rodney in TX – Machine this part was bought for: 2014 SUZUKI RMZ250

Comments On Jan 03, 2014:I got this for my '14 RMZ 250. It takes a bit of fitment - the holes for the seat bolts in the side panels have to be drilled larger for the spacer and the panels themselves take some jiggling to get in place. Also, the yellow on the side panels seems to be slightly off from the rest of the plastic, or maybe it's just thinner and more transparent, I can't tell. Overall, however, this seems to be good quality stuff.

Was this review helpful?

0 of 0 people found this review helpful.

nice

DEAN in CA – Machine this part was bought for: 2010 HONDA CRF250R

Comments On Dec 17, 2013:nice for the price. OEM is better but way more.

Was this review helpful?

0 of 0 people found this review helpful.

Poor

Adam in QLD – Machine this part was bought for: 2011 YAMAHA YZ450F

Comments On Nov 15, 2013:Terrible gaps in the plastic, doesn't line up at all but you can make it work with a little bit of patience. Durable but you expect them to be more precise with the fit for the money.

Was this review helpful?

0 of 0 people found this review helpful.

full plastics

scot in CA – Machine this part was bought for: 2011 SUZUKI RMZ450

Comments On Nov 17, 2013:every thing worked fine

Was this review helpful?

0 of 0 people found this review helpful.

great product

bryston in OK – Machine this part was bought for: 2009 KAWASAKI KX250F

Comments On Oct 28, 2013:Great product, had to flex to fit around gas tank, front and rear fender slightly different shade of green, still a great product, definitely recommend

Was this review helpful?

0 of 0 people found this review helpful.

good plastic

Guy in AB – Machine this part was bought for: 2012 KTM 150 XC

Comments On Sep 27, 2013:Good plastic overall, happy with the quality

Was this review helpful?

0 of 0 people found this review helpful.

poor fit

F in MD – Machine this part was bought for: 2012 KAWASAKI KX250F

Comments On Sep 19, 2013:will try a differant brand next time

Was this review helpful?

0 of 0 people found this review helpful.

Color Matches, Looks Good!

Phillip in AL – Machine this part was bought for: 2013 KTM 350 XC-F

Comments On Sep 18, 2013:While not the OEM manufacturer, the color and fit was very good. Only piece that had an issue with was the air filter cover. Just a little off, but be prepaired to whitle a little with any plastic product. The air filter cover just needed a little coaxing to get into place. Make sure you order the metal hardware because not all pieces come with it. The front fenders DO include the insert, but the air filter cover does NOT include the fasteners. Just unscrew and reuse from your original.

Was this review helpful?

0 of 0 people found this review helpful.

Good product

Marquis in DE – Machine this part was bought for: 2012 HONDA CRF250R

Comments On Jun 04, 2013:Installed these plastics on my 250r to avoid messing up the stock ones. Haven't experienced any fading so far. Would recommend and price is good

Was this review helpful?

0 of 0 people found this review helpful.

Kit is not complete for honda '09-'12 450r

Evan in Arizona – Machine this part was bought for: 2009 HONDA CRF450R

Comments On May 04, 2013:It is missing the side pieces that cover the sides of the airbox! They are marketing this as a "full kit" but it is not "full"!

Was this review helpful?

0 of 0 people found this review helpful.

Great quality. Ok fit

Derek in UT – Machine this part was bought for: 2013 KTM 300 XC

Comments On Apr 30, 2013:I got this kit in white for my 300xc. The color looks great and the plastic has held up to some good hits. It took a little time to fit the airbox lid properly but overall a great product.

Was this review helpful?