Acerbis Chain Slider

Customer Reviews for Acerbis Chain Slider

Overall customer review score:

Showing All 201 Reviews

Return to Acerbis Chain Slider Product Page

Reviews by real power sport enthusiasts...your opinion counts to us and fellow riders! Make the best purchasing decision by getting the latest reviews.

Customer Reviews

Acerbis Chain Slider Reviews

Your review could win you a $100 or $500 gift card!

Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!

0 of 0 people found this review helpful.

acerbis chain slider kx250 F

Forrest in PA

Comments On May 04, 2016:fits good no problems so far.

Was this review helpful?

0 of 0 people found this review helpful.

Good Quality!

Kevin in WY

Comments On Apr 29, 2016:Great for the price! Some are better, but they cost a lot more.

Was this review helpful?

0 of 0 people found this review helpful.

good product

Zachary in IN – Machine this part was bought for: 2013 SUZUKI RMZ250

Comments On Apr 28, 2016:Fit good and work as it should

Was this review helpful?

0 of 0 people found this review helpful.

It works

Tyler in AB

Comments On Apr 18, 2016:fit on tight, which is good. holes in the right spot, good wear resistance

Was this review helpful?

0 of 0 people found this review helpful.

Durable and affordable

SEAN in TX – Machine this part was bought for: 2001 HONDA CR250R

Comments On Mar 21, 2016:Have been using this chain slider for over a year and it is still going strong. No excess noise and it has not worn down my chain. I have a TM Designworks chain guide and do not think I will ever buy the TM chain slide as this is all I need.

Was this review helpful?

0 of 0 people found this review helpful.

So so

CODY & LARRY in CO – Machine this part was bought for: 2010 YAMAHA YZ250

Comments On Mar 16, 2016:Ok would of went with the Tm designs if I had the money

Was this review helpful?

0 of 0 people found this review helpful.

Everything you would expect

Joseph in GA – Machine this part was bought for: 2007 HONDA CRF450R

Comments On Mar 15, 2016:Another quality product

Was this review helpful?

0 of 0 people found this review helpful.

Tough

Brandon in ID – Machine this part was bought for: 2004 HONDA CRF250X

Comments On Feb 19, 2016:i've had this on my bike for a year and it's still looking good.

Was this review helpful?

0 of 0 people found this review helpful.

Fantastic Piece!

Christopher in NM – Machine this part was bought for: 2013 SUZUKI RMZ250

Comments On Feb 14, 2016:This chain slider is very strong. It lasts even under several riding conditions. Cant ask for anything more! Great fit also.

Was this review helpful?

0 of 0 people found this review helpful.

Really Good

Jeffrey in NY – Machine this part was bought for: 2012 KAWASAKI KX450F

Comments On Jan 31, 2016:I didn't give it five stars because it was a good price for its longevity, but if it were a few dollars less, it would have got 5. A good piece of plastic.

Was this review helpful?

0 of 0 people found this review helpful.

Fit great

SONNY in NC – Machine this part was bought for: 2009 YAMAHA YZ250

Comments On Jan 27, 2016:great product ,fast service

Was this review helpful?

0 of 0 people found this review helpful.

Big improvement over stock

Kevin in CO – Machine this part was bought for: 2010 YAMAHA YZ450F

Comments On Jan 26, 2016:Works much better and quieter than the OEM one. In deep ruts and rocks it performs as it should. Haven't had it break off or cause a chain derailment since installation and we ride very technical/rocky terrain. We've had plenty of OEM ones fail beyond repair. After 250 miles of technical terrain it shows some wear but is still performing well.

Was this review helpful?

0 of 0 people found this review helpful.

good fit and durability

DERRIK in ID – Machine this part was bought for: 2005 YAMAHA YZ250

Comments On Jan 23, 2016:never had a problem with this product

Was this review helpful?

0 of 0 people found this review helpful.

Great product

Sam in WA – Machine this part was bought for: 2012 KTM 250 XC-W (E-Start)

Comments On Jan 19, 2016:Fit is perfect and materials as good or better than OEM.

Was this review helpful?

0 of 0 people found this review helpful.

Acerbis Chain Slider

JEFF in CA – Machine this part was bought for: 2005 SUZUKI RM250

Comments On Jan 15, 2016:Good product fits well

Was this review helpful?

0 of 0 people found this review helpful.

Perfect

Darren in ID – Machine this part was bought for: 1999 YAMAHA YZ125

Comments On Jan 11, 2016:Good product, fits good, no complaints.

Was this review helpful?

0 of 0 people found this review helpful.

Great

Joshua in VA – Machine this part was bought for: 2014 KTM 85 SX

Comments On Dec 30, 2015:Prefect fit and a great price

Was this review helpful?

0 of 0 people found this review helpful.

it does the job

Tim in AZ – Machine this part was bought for: 2003 KAWASAKI KX250

Comments On Dec 29, 2015:it works but one of the holes was slightly off but I got everything to work nicely, its holding up good tho.

Was this review helpful?

0 of 0 people found this review helpful.

Works

Shane in ID – Machine this part was bought for: 2008 SUZUKI RMZ450

Comments On Dec 29, 2015:Good fit, long lasting.

Was this review helpful?

0 of 0 people found this review helpful.

good

don in OH – Machine this part was bought for: 1999 KAWASAKI KX250

Comments On Dec 25, 2015:does the job

Was this review helpful?

0 of 0 people found this review helpful.

Excellent value

chris in IA – Machine this part was bought for: 2012 YAMAHA YZ250

Comments On Dec 17, 2015:You can find chain slides in all price ranges, and this one is on the lower spectrum of pricing, and it fits perfectly, and performs great.

Was this review helpful?

0 of 0 people found this review helpful.

Great replacement part

Danny & Lorrie in OK – Machine this part was bought for: 2012 SUZUKI RMZ250

Comments On Dec 14, 2015:We all know that the Acerbis chain slider is one of the best replacement parts. I do wish the cost was cheaper, but you get your money out of the part in the long run. After 45 hours of hard ride time on MX tracks and 2 hours at a time cross country trail rides, the part shows almost no wear. Yes I would buy again and recommend the product to anyone for any bike.

Was this review helpful?

0 of 0 people found this review helpful.

Works as good as stock

TIM in FL – Machine this part was bought for: 2013 KAWASAKI KX450F

Comments On Dec 05, 2015:Good alternative to stock. Will buy again

Was this review helpful?

0 of 0 people found this review helpful.

Decent

JONATHAN in UT – Machine this part was bought for: 2009 YAMAHA YZ450F

Comments On Nov 27, 2015:Cheap option if you're looking for a stock replacement. If you're looking for higher quality, spend more money.

Was this review helpful?

0 of 0 people found this review helpful.

Chain Slider

Dylan in LA – Machine this part was bought for: 2013 HONDA CRF450R

Comments On Oct 27, 2015:This is high quality and a great value. Fit good as the oem did.

Was this review helpful?

0 of 0 people found this review helpful.

Acerbis Chain Slider

Josh in NM – Machine this part was bought for: 2004 KTM 525 EXC 4-Stroke

Comments On Oct 07, 2015:I have had this chain slider for more that a year now. Has held up just fine. Bolt holes lined up pretty good.

Was this review helpful?

0 of 0 people found this review helpful.

didn't line up

Lance in OK – Machine this part was bought for: 2006 KTM 200 XC-W

Comments On Sep 23, 2015:acerbic usually have great products, but this bolt holes for the chain slider didn't line up. I had to stretch the slider but is was still a little off.

Was this review helpful?

0 of 0 people found this review helpful.

Chain slider

Tim in KY – Machine this part was bought for: 2007 HONDA CRF250R

Comments On Oct 02, 2015:Great fit! Good price! We will see how it holds up, but I don't for see it having any issues. Rocky Mountain is the best!

Was this review helpful?

0 of 0 people found this review helpful.

Very durable

MICAH in CA – Machine this part was bought for: 1994 KAWASAKI KX250

Comments On Sep 26, 2015:Acerbis products keep my 94 KX250 running great.

Was this review helpful?

0 of 0 people found this review helpful.

quality product

Bryan in ID – Machine this part was bought for: 2009 YAMAHA YZ450F

Comments On Aug 31, 2015:Easy install, fit and Finnish excellent.

Was this review helpful?

0 of 0 people found this review helpful.

Great product!

ALEX in NC – Machine this part was bought for: 2004 HONDA CRF250X

Comments On Aug 12, 2015:Not the best you can buy but definitely a great buy for the cost.

Was this review helpful?

0 of 0 people found this review helpful.

Working fine so far

Rick in CA – Machine this part was bought for: 2006 HONDA CRF450R

Comments On Aug 07, 2015:Over 20 hours, a little wear but, still fine.

Was this review helpful?

0 of 0 people found this review helpful.

Great product, great price

Charles in CA – Machine this part was bought for: 2002 HONDA CR125R

Comments On Jul 14, 2015:Fit and appearance as good or better than original part. Hope it holds up and wears just as well.

Was this review helpful?

0 of 0 people found this review helpful.

Smooth and quiet

Ben in WV – Machine this part was bought for: 2001 KAWASAKI KX250

Comments On Jul 08, 2015:This slider fits well and is very durable.

Was this review helpful?

0 of 0 people found this review helpful.

Plastic

DAVID in PA

Comments On Jun 30, 2015:Good quality

Was this review helpful?

0 of 0 people found this review helpful.

good slider

nathan in VA – Machine this part was bought for: 2011 KTM 450 SX-F

Comments On May 11, 2015:This is a good replacement slider. It costs less and is way easier to install then the other sliders out there.

Was this review helpful?

0 of 0 people found this review helpful.

Works good

Mario in AK

Comments On Apr 21, 2015:Worked just as it should, minimal wear.

Was this review helpful?

0 of 0 people found this review helpful.

excellent product

ERIC in WV

Comments On Apr 05, 2015:great product, well made

Was this review helpful?

0 of 0 people found this review helpful.

A++++

jeremy in CA – Machine this part was bought for: 2002 HONDA CRF450R

Comments On Mar 30, 2015:Tougher and longer lasting than the OEM.....Does its job

Was this review helpful?

0 of 0 people found this review helpful.

Acerbis Chain Slider

brad in NC – Machine this part was bought for: 2001 HONDA CR125R

Comments On Mar 14, 2015:Easy to install, lasts a long time, comes with a free sticker.

Was this review helpful?

0 of 0 people found this review helpful.

fair to good

Mark in CA

Comments On Mar 14, 2015:good wear not bad

Was this review helpful?

0 of 0 people found this review helpful.

good replacment wear part

Daniel in CA – Machine this part was bought for: 2006 YAMAHA YZ450F

Comments On Mar 12, 2015:with proper chain ,sproket and guild plate replacement everyhting wears good and evenly in the desert or sand dunes.

Was this review helpful?

0 of 0 people found this review helpful.

It's all Good

John in NJ

Comments On Mar 10, 2015:Good quality product

Was this review helpful?

0 of 0 people found this review helpful.

Works great

ALEXANDER in NV – Machine this part was bought for: 2004 HONDA CR250R

Comments On Feb 26, 2015:Have a few rides on it now and It seems to be wearing very nicely. I'd recommend this anytime

Was this review helpful?

0 of 0 people found this review helpful.

Good item

TRENT in NV

Comments On Feb 23, 2015:Great fit

Was this review helpful?

0 of 0 people found this review helpful.

pretty good.

DANIEL in OR – Machine this part was bought for: 2002 YAMAHA YZ250F

Comments On Feb 18, 2015:fit was okay. I needed to open up the holes so the counter sunk mount washers would sit lower/flush. i mounted it on a 2001 yz250f tho..not sure it should matter. after the mod it works like stock. Wait and see how long the slider lasts, but it seems high quality, should be fine. I think the price is right on.

Was this review helpful?

0 of 0 people found this review helpful.

Chain Slider

SALVATORE in WA – Machine this part was bought for: 2002 HONDA CR250R

Comments On Feb 10, 2015:It's been on my bike for at least six years and still not worn through yet

Was this review helpful?

0 of 0 people found this review helpful.

Very Happy

Eric in CA – Machine this part was bought for: 2003 KAWASAKI KX250

Comments On Feb 06, 2015:Works great. No complaints. Easy install - everything lined up perfectly.

Was this review helpful?

0 of 0 people found this review helpful.

Chain slider

Josh in ID – Machine this part was bought for: 2003 HONDA CRF450R

Comments On Jan 11, 2015:So far so good after about 20 hours. Cheap and it works.

Was this review helpful?

0 of 0 people found this review helpful.

Good quality chain slider, but holes aren't right

Chris in IN – Machine this part was bought for: 2012 KTM 300 XC

Comments On Jan 06, 2015:Looks like the slider is going to be good, but the mounting hole on the top does not quite align with the swing arm. I ended up cross threading the bolt and now will have to repair the threads next time I take the slider off. I will update after I put some hours on the slider.

Was this review helpful?

0 of 0 people found this review helpful.

acerbis chain slide

John in CA – Machine this part was bought for: 2006 SUZUKI RM250

Comments On Jan 05, 2015:have used this before.great product and last a long time.cant go wrong with any of acerbic prod.

Was this review helpful?

0 of 0 people found this review helpful.

good price and product

Jonathan in NJ

Comments On Jan 01, 2015:Fit the bike, and is quiet

Was this review helpful?

0 of 0 people found this review helpful.

Bad Fitment

Tim in VA – Machine this part was bought for: 2008 SUZUKI RM250

Comments On Dec 18, 2014:The product is priced great but the Bolt holes weren't perfectly aligned so I have to do a little trimming. Other than that no complaints

Was this review helpful?

0 of 0 people found this review helpful.

Great

joe in TX – Machine this part was bought for: 2007 SUZUKI RMZ250

Comments On Dec 10, 2014:Works perfect

Was this review helpful?

0 of 0 people found this review helpful.

RM250 slider

LARRY in WA – Machine this part was bought for: 2008 SUZUKI RM250

Comments On Dec 04, 2014:Has been holding up well for the past season good value for the $$

Was this review helpful?

0 of 0 people found this review helpful.

Works Great!

JOEL in CA – Machine this part was bought for: 2008 YAMAHA YZ450F

Comments On Nov 12, 2014:Replaced OEM slider with this one. Works really good, has lasted a really long time! Will buy again when I need a new one, highly recommend!

Was this review helpful?

0 of 0 people found this review helpful.

Works/Fits well!

Colin in BC – Machine this part was bought for: 2003 YAMAHA YZ250

Comments On Nov 04, 2014:Fits perfectly! Appears to be wearing well after 6 months!

Was this review helpful?

0 of 0 people found this review helpful.

last longer than stock

Mike in TX – Machine this part was bought for: 2014 YAMAHA YZ450F

Comments On Oct 28, 2014:fits good, looks good & last longer than oem

Was this review helpful?

0 of 0 people found this review helpful.

great quality at an unbeatable price!

michael in ME – Machine this part was bought for: 2001 YAMAHA YZ250

Comments On Oct 13, 2014:Fit great.

Was this review helpful?

0 of 0 people found this review helpful.

Good slider

George in BC

Comments On Oct 10, 2014:Works great little tricky to install, but is just as good as oem

Was this review helpful?

0 of 0 people found this review helpful.

Nice

Logan in WA – Machine this part was bought for: 2008 SUZUKI RMZ450

Comments On Sep 03, 2014:Works just like it should and lasts.

Was this review helpful?

0 of 0 people found this review helpful.

Bolt pattern is off

George in VA – Machine this part was bought for: 2012 KAWASAKI KX450F

Comments On Aug 21, 2014:Bolt holes in chain slider doesn't match machine. I purchased a TM Design slider and it mounted perfect.

Was this review helpful?

0 of 0 people found this review helpful.

Great product

kaleb in OH – Machine this part was bought for: 2001 SUZUKI RM125

Comments On Aug 21, 2014:This slider fits perfect. No complaints

Was this review helpful?

0 of 0 people found this review helpful.

Great chain slider did the intended job

James in NY – Machine this part was bought for: 2005 HONDA CRF450R

Comments On Aug 12, 2014:Had it on for a little over ten hours shows very little wear and the fitment was very good. I would recommended to a friend

Was this review helpful?

0 of 0 people found this review helpful.

perfect fit

christopher in VA – Machine this part was bought for: 2007 HONDA CRF450R

Comments On Jul 17, 2014:Fits better than oem. I gave it 4 starts because I just installed the slider and only rode the bike twice since. But I'm sure the durability will be great also.

Was this review helpful?

0 of 0 people found this review helpful.

good

Teddy in NC

Comments On May 14, 2014:Works just as needed

Was this review helpful?

0 of 0 people found this review helpful.

Fits and works great

Matt in WA – Machine this part was bought for: 2005 YAMAHA YZ250

Comments On May 01, 2014:No problem after several rides

Was this review helpful?

0 of 0 people found this review helpful.

Great

Julius in MI

Comments On Apr 28, 2014:Fit good works good.

Was this review helpful?

0 of 0 people found this review helpful.

Good

Chad in KY – Machine this part was bought for: 2001 HONDA CR250R

Comments On Apr 26, 2014:Great product

Was this review helpful?

0 of 0 people found this review helpful.

Better than oem.

Parker in SC – Machine this part was bought for: 2013 KAWASAKI KX450F

Comments On Mar 29, 2014:If you have never replaced your chain slider and you've had your bike for a while, check it or you might have a hole in your swing arm. That chain spins fast.

Was this review helpful?

0 of 0 people found this review helpful.

Great

Laura in CT – Machine this part was bought for: 1999 SUZUKI RM250

Comments On Mar 25, 2014:Definitely recommend

Was this review helpful?

0 of 0 people found this review helpful.

good product

Brad in ON – Machine this part was bought for: 2009 YAMAHA YZ250

Comments On Mar 17, 2014:Worked good

Was this review helpful?

0 of 0 people found this review helpful.

Fit in OEM holder

James in TX – Machine this part was bought for: 2005 YAMAHA YZ125

Comments On Feb 25, 2014:Fit in the OEM guide holder for a 2005 YZ125 nicely.

Was this review helpful?

0 of 0 people found this review helpful.

average

joe in North Carolina

Comments On Feb 09, 2014:only lasted 1 season.

Was this review helpful?

0 of 0 people found this review helpful.

works as described

Scott in PA

Comments On Jan 15, 2014:Another quality product sold by rmatv.

Was this review helpful?

0 of 0 people found this review helpful.

great for the price but wears out fast

PHIL in CA – Machine this part was bought for: 2008 HONDA CRF450R

Comments On Jan 07, 2014:Cant beat the oem one for the wear but for the price will get you by for a few months

Was this review helpful?

0 of 0 people found this review helpful.

Good Chain slider

Wes in ID – Machine this part was bought for: 2000 YAMAHA YZ250

Comments On Dec 25, 2013:Good product. Would recommend this chain slider.

Was this review helpful?

0 of 0 people found this review helpful.

made a difference

Sandy in GA – Machine this part was bought for: 2006 HONDA CRF450R

Comments On Dec 05, 2013:Stopped chain slap completely.

Was this review helpful?

0 of 0 people found this review helpful.

It works

DAWSON in ID – Machine this part was bought for: 2007 KAWASAKI KX450F

Comments On Jul 01, 2013:Nice and flexible, took some work to get it installed, but fits tight and secure. Seems to be doing a fine job.

Additional Comments On Nov 15, 2013:Seems to be good quality, it was a bit tight going on. I had to start all the screws and real work it hard to get it on.

Was this review helpful?

0 of 0 people found this review helpful.

great

JEFF in IL – Machine this part was bought for: 2010 KTM 300 XC-W (E-Start)

Comments On Nov 04, 2013:Nice color (Orange) and I like the ability to remove and replace without breaking the chain. They have a unique design to allow this.

Was this review helpful?

0 of 0 people found this review helpful.

Chain gaurd is ok

JAMI in WY – Machine this part was bought for: 2012 YAMAHA YZ250F

Comments On Oct 15, 2013:It was better than stock. Wish it had more colors to choose from. Easy to install.

Was this review helpful?

0 of 0 people found this review helpful.

Great product

wayne in SA – Machine this part was bought for: 2000 SUZUKI RM250

Comments On Oct 03, 2013:Fits well. What more could you ask. Recommend as a replacement for the original worn out one.

Was this review helpful?

0 of 0 people found this review helpful.

chain slider

Richard in TX – Machine this part was bought for: 2006 HONDA CRF250R

Comments On Sep 23, 2013:fit was great super easy to install, couldn't ask for a better part

Was this review helpful?

0 of 0 people found this review helpful.

Chain slider

Jacob in TX – Machine this part was bought for: 2002 KTM 520 MXC 4 Stroke

Comments On Sep 03, 2013:Decent slider. Fit to spec. Looks like it should hold up for a good while

Was this review helpful?

0 of 0 people found this review helpful.

Acerbis chain slider

Christa in TX – Machine this part was bought for: 2003 KTM 250 SX

Comments On Aug 19, 2013:I have had this slider on for 2 years. Do woods riding and it has been a great product. I would purchase again! Easy to Install, self cleaning in the mudd and it looks good.

Was this review helpful?

0 of 0 people found this review helpful.

do not buy!!!!!

Lee in PA – Machine this part was bought for: 2005 HONDA CR125R

Comments On Aug 11, 2013:Don't buy at least for a Honda! Didn't fit right and could not use. Product does not deserve the 1 star.

Was this review helpful?

0 of 0 people found this review helpful.

Chain slider

BOBBY in TX – Machine this part was bought for: 2002 HONDA CR250R

Comments On Jul 24, 2013:Great acerbis quality. Fit like new on my 10 yr old bike!

Was this review helpful?

0 of 0 people found this review helpful.

Fits great

Eric in MI – Machine this part was bought for: 2005 HONDA CRF250X

Comments On Jul 20, 2013:Perfect fit and looks a lot better then stock!

Was this review helpful?

0 of 0 people found this review helpful.

Easy to install. Good quality.

edward in IA

Comments On Jul 06, 2013:Easy to install. Good quality.

Was this review helpful?

0 of 0 people found this review helpful.

good product

jordan in NY

Comments On Jun 24, 2013:works like it should

Was this review helpful?

0 of 0 people found this review helpful.

good for the price

BRIAN in WA – Machine this part was bought for: 2009 KAWASAKI KX450F

Comments On Jun 07, 2013:not top of the line but good for the price

Was this review helpful?

0 of 0 people found this review helpful.

good for the price

BRIAN in WA – Machine this part was bought for: 2009 KAWASAKI KX450F

Comments On Jun 07, 2013:not top of the line but good for the price

Was this review helpful?

0 of 0 people found this review helpful.

llooks good works well

Alan in PA – Machine this part was bought for: 2000 YAMAHA YZ250

Comments On Jun 01, 2013:works well does the job looks good too

Was this review helpful?

0 of 0 people found this review helpful.

Works Awesome! No Complaints!

Timothy in MI – Machine this part was bought for: 2001 HONDA CR250R

Comments On May 29, 2013:2001 CR250R

Was this review helpful?

0 of 0 people found this review helpful.

fit well

Robert in NY – Machine this part was bought for: 2003 HONDA CR250R

Comments On May 26, 2013:good product

Was this review helpful?

0 of 0 people found this review helpful.

Good replacement

Bradley in NY

Comments On May 25, 2013:great chain slider. would have given 5 stars if it came with a piece of foam on it. the slider was a little noisy at first. i put a piece of foam tape under it and was great after that.

Was this review helpful?

0 of 0 people found this review helpful.

good

Royal in UT – Machine this part was bought for: 2012 KAWASAKI KX250F

Comments On May 16, 2013:you get what you pay for. Wears out similar to stock which is pretty quickly because of the 12 kawi 250s design.

Was this review helpful?

0 of 0 people found this review helpful.

Not even close

Paul in CA – Machine this part was bought for: 2006 SUZUKI RM250

Comments On May 06, 2013:looks like a quality piece. Doesn't fit my application. Bolt holes are off by 1/2' when wrapped around swingarm. I would return it, but I already modified it cuz it doesn't have a small notch like oem, that allows installing a bigger countershaft sprocket without removing slider & sprocket at the same time. I'll just buy oem.

Was this review helpful?

0 of 0 people found this review helpful.

Chain Slider

brad in IL

Comments On Apr 18, 2013:Great quality!

Was this review helpful?

0 of 0 people found this review helpful.

Great FIt, Very Durable

Christopher in MD

Comments On Apr 18, 2013:Good price and great fit. Very durable.

Was this review helpful?