Odi Dual Sport Accessories: Handlebar-Control

Latest Odi Reviews – You could win up to $500 for reviewing products!

  • Odi V2 Half Waffle MX Lock-On Grips

    Odi V2 Half Waffle MX Lock-On Grips

    Peter in AZ

    Great Grips

    These grips are worth the extra money, No glue or safety wire required.

    Read All Reviews
  • Odi Pro Edition Half-Waffle MX Grips

    Odi Pro Edition Half-Waffle MX Grips

    Jon in NC

    Odi Pro Edition Half-Waffle MX Grips

    Very comfortable, maybe not the longest wearing or sturdiest, but it's a trade-off.

    Read All Reviews
  • Odi V2 Rogue MX Lock-On Grips

    Odi V2 Rogue MX Lock-On Grips

    GEORGE in CA

    would not fit pro taper contour

    Purchased the pro taper contour bars and the odi grips. They are too tight to get on removed the tightening screw and tried to open and force on would not go stock bars measure 22.2 mm. Odigrips 22.4 contour bars 22.7. Not sure if both items are within their own specs too bad look and feel good

    Read All Reviews
  • Odi V2 Emig MX Lock-On Grips

    Odi V2 Emig MX Lock-On Grips

    Don in AZ

    Works as advertised, but may not be for everyone.

    This is basically a 1/3 waffle pattern, in cool color combinations, that seems to function well. Because the rubber part of the grip has to share space with the plastic sub frame there is a trade off between the diameter of the grip (seems slightly bigger than normal) and the amount of vibration that is translated thru the grip (seems slightly higher than others I have used). If you like thin grips the additional size may be an issue as it doesn't offer the benefits of additional rubber that you usually get with thicker grips. I'm not sure if the rogue version of this will provide more dampening, but I will likely try it next time around. If neither work or the rogue grip is too big for my liking I will likely go back to a standard glue/wire on grip. These are used with full wrap hand guards. They went on well, no slippage, and I have had no issues with durability from use or crashes due to the protection of the outer hand guards. Only other thing to note is about the indexing of the throttle grip. You can't really tweak it much as it is set with the throttle cam. Not a big issue, but should be noted. The rogue pattern may make this much less of an issue.

    Read All Reviews
  • Odi Mini MX Half-Waffle Grips

    Odi Mini MX Half-Waffle Grips

    David in IL

    Too small, tore on install

    Grips are meant for 50cc bikes apparently not ktm 50s. Grips are way too small. Rubber compound is very soft. End of grip tore on install. I put on about 5-6 new sets of grips per year, so this was not my first time. I will definitely go back to OE KTM grips once these completely fail which I don't expect to be too long.

    Read All Reviews