See all parts that fit your machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Log in to use your Rider Profile Machines »

Latest Fuel and Air Intake Systems Reviews – You could win up to $500 for reviewing products!

  • Keihin N424-52 Series Leak Jet

    Keihin N424-52 Series Leak Jet

    Coby in NV

    Little tiny leak jets

    They work exactly as they’re supposed to. I’m new to a carb with a power jet so I think I may have wanted to go a bit richer . So I’ll buy some more here soon .and what I did was took a 199 KX250 ignition and carb , modified the stator plate , made another coil mount , modified the carb to fit bought a rpm switch and am using the ignition and fuel system of the 99 KX250 on the 92kx500 . With great results .

    Read All Reviews
  • Uni Air Filter

    Uni Air Filter

    John in CT

    XR 650L Uni filter

    I replaced my stock air filter on my 2012 XR 650L with the Uni and what a difference it made. Strongly recommend if you are looking to make more power and want to keep the reliability. You will need to clean it once a year I find. Much better than the stock filter if you plan on doing a lot of off-road with mud and dirt. Stock filter can be cleaned compared to the uni. Fit was 100% I’d recommend to anyone.

    Read All Reviews
  • Sudco OEM Keihin Float Bowl O-Ring

    Sudco OEM Keihin Float Bowl O-Ring

    John in AZ

    Cheap and Easy

    Fits and seals perfect. fixed my leaky carb. Have over 20 rides and no leaks.

    Read All Reviews
  • Mikuni VM28/486 Series Pilot Jet

    Mikuni VM28/486 Series Pilot Jet

    Kim in CO

    The right part

    They fit and work as they should

    Read All Reviews
  • JD Jetting Jet Kit (No CA)

    JD Jetting Jet Kit (No CA)

    Donnie in AR

    Suzuki DR 650 SE WOW! What a Difference!

    My DR 650 had the usual issues with carburation. It was running lean, surging when trying to maintain a steady speed and terrible throttle response. I spent the little bit extra and bought this kit. I live in Arkansas but I love to run out to the Rockies and hit the high passes, so I can use the additional needle and jets. This is only my second carburator job but the instructions were actually very good. I followed the instructions and set up the carb as recommended. It cranked right up and ran like a totally different machine. It's now a bit cold natured where it wasn't before. I start with the choke and open it up after 30 seconds now. The bike has much more power at low rpm. I can shift into 5th about 10 mph sooner now. I used to have to get over 50 before I could shift into high. I hit the interstate on-ramp and cranked it open. That's when I got this big grin on my face. WOW! What a difference! It felt like I just gained about 10 horsepower. The throttle response is immediate and strong all the way up the power band. On the way to work this morning I got it up to 95 in a short distance and I know she's got more. I just don't have a death wish with my 50/50 tires. I highly recommend this kit. The needles are the big difference maker. They are made to improve low end performance and they truly deliver. This kit is worth the extra bucks. It's not an easy job to do yourself, despite the good instructions. Removing the screws from my carb required grabbing them from the side with vice grips. You have to be extremely careful to keep track of all the small parts and know where they belong. I recommend you buy a gasket kit and replace the bowl gasket and o-rings. They live in ethanol and no material can hold up to that for a long time. They get flat and brittle. Drilling out the plug for the air/fuel screw is another opportunity to fail. Take your time and don't drill into the screw. There is a good thread on the ADVRIDERS forum for my carb that was very helpful. It had good photos and gave me more confidence. Get this kit and unleash the beast that is hiding behind those pitiful stock parts!

    Read All Reviews
  • Dynojet Jet Kit (No CA)

    Dynojet Jet Kit (No CA)

    Richard in ID

    Installed this kit and I was extremely disappointed. Installed everything according to the instructions and the bike ran extremely rich. Sputtered under load on anything above 1/4 throttle. Returned the main jet to stock, but kept the needle jet because it has more slots available for adjustment. For the XR650R it did not come with the D-shaped tool.

    Read All Reviews

Motorcycle Air Intake & Fuel Systems

Get high performance fuel and air intake systems that add functionality and style to your bike. Rocky Mountain ATV/MC.com has a huge selection of motorcycle fuel and air intake systems at the lowest prices you’ll find anywhere. Air filters are essential to keep dust and dirt from ruining your motorcycles engine and parts and Rocky Mountain ATV/MC has several air filters to choose from in colors and designs that mesh with the sleek look of your bike. Like the K&N air cleaner with an engraved flame design that provides maximum airflow and gives up to a 5% horsepower gain. We also have fuel controllers, jets and jet kits and fuel intake accessories. If you’re worried about finding the right part to fit your motorcycle, don’t be. We’ve made it easy with our “Parts Finder” that pulls up the fuel and intake parts you need once you enter your motorcycle’s make, model and year. Additionally, we usually ship the same day you order, allowing you to get the parts you need as soon as possible so you can get back to what you enjoy most – riding.

RM Cash ProgramParts Finder