Dunlop D401 Front Motorcycle Tire

Special Notes:

• When selecting new motorcycle tires, be sure they meet the requirements of your motorcycle and its expected usage. Please use our vehicle drop down selector at the top of this page to assist you in choosing a tire for your vehicle. Always refer to your owner’s manual for correct tire specifications for your vehicle.

  Size	100/90-19
  Tire Construction	Bias
  Load Rating	57 (507 lbs.)
  Speed Rating	H (130 mph)
  Max PSI	41
  Load Range	B
  Tread Plies	4 Polyester
  Sidewall Plies	4 Polyester
  Position	Front
  Sidewall	Wide White Wall
  Weight	12.8 lbs.
  Rim Size	19
  Tube / Tubeless	Tubeless
  Directional	Yes

  
  

  

  SAFETY

  Inspect and check tire pressure often. This is the most important tire-maintenance function you can perform. Refer to your machine's documentation for proper maintenance. Always give tires a gentle "run-in" period of 100 miles to get the feel of new tires--this means they should not be subjected to maximum power, abrupt lean-over, hard cornering, etc. Always match the front and rear tires for optimal handling, safety and performance. Mixing radials, or mixing radials with bias or belted-bias tires, may adversely affect handling and stability.

  WARNING

  The charts and information on this page do not imply interchangeability. Consult your machine's manual to determine correct replacements, clearances, compatibility and stability, load-bearing capacity, speed rating, radial vs. non-radial, pattern and tread compound requirements, inflation recommendations and front-to-rear tire matching. Wrong selection can result in tire failure or loss of control with serious injury or death.