Pivot Works A-Arm Kit

Choose a vehicle:

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

» Log in to use your Rider Profile Machines
Pivot Works A-Arm Kit
  • View Larger
  • Video

Pivot Works A-Arm Kit

Our Price: $26.96$107.96

MSRP: $29.95 - $119.95 - You save up to $11.99 (10% off)

View Product Details

Select type, year, make and model above

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: sales@rockymountainatv.com
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)

Details

    When sloppy control and bad tractability start slowing you down, it’s probably time to rebuild you’re a-arms with the Pivot Works A-Arm Kit. With this kit you get all the bearings, pins, collars, and seals needed to get your A-Arms back into spec. All parts are made from quality materials and manufactured to tolerances that meet or exceed OEM specification, so you know you’ll have parts that fit your machine perfectly. And if your ATV is a Yamaha model that uses bushings, you’re in luck because the Pivot Works kits upgrades those bushings to needle bearings for a huge reduction in friction. Pick up a Pivot Works A-Arm Kit for yourself and experience the difference.

    Specs:
  • A-Arm kits restore steering control and tractability from worn or rusted components.
  • Complete kits contain bearings, pins, collars and seals manufactured to OEM specifications for a perfect fit.
  • Yamaha kits have been upgraded from bushings to needle bearings for reduced friction.
  • Kits are sold as each.

Pivot Works A-Arm Kit Reviews

Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
 
4.9 / 5.0
26 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
22
4
0
0
0
Value
4.3 / 5
Longevity
4.7 / 5
Fitment
4.8 / 5
Performance
5.0 / 5
Recommend it?
Yes (5)
Value
4 / 5
This item was purchased for a friend of mine.
The parts contained in this order were timely received and installed without any problems.

-m-2013 POLARIS RANGER RZR 800 EPS--
December 18, 2017
Quartzsite , AZ, US
Age: 45-64
Purchased
2 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Value
4 / 5
Longevity
4 / 5
Fitment
4 / 5
Performance
5 / 5
Recommend it?
Yes
Good kit
All it needed was instructions and it would have got 5 stars
June 19, 2017
Bear creek , PA, US
Purchased
8 months ago
Value
5 / 5
Longevity
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Sweet bushings...whish they had these for my rzr
Excellent replacement part. Glides much smoother than typical delrin bushing. Wish I could get these for my rzr. Sick of replacing all the time.
May 2, 2017
Chattanooga , TN, US
Purchased
10 months ago
Value
5 / 5
Longevity
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
easy to install
Have not rode yet but bet they are better than the factory plastic bushings that were removed.

-m-2007 YAMAHA RAPTOR 350--
March 22, 2017
canal winchester, OH, US
Age: 25-44
Purchased
11 months ago
Gender:
Male
Weight:
101 - 130 lbs.
Height:
5'1 - 5'3
Value
4 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
No more play in the front end
Wow, what a difference this kit made replacing my worn out stock plastic bearings. I replaced both upper and lowers and it has completely eliminated the play in the front end. Bought my Raptor used and it always felt like it wouldn't turn as sharp as my buddies. This kit fixed that. Cant report on longevity since I just installed however, parts have a lifetime warranty.

-m-2005 YAMAHA RAPTOR 660--
February 27, 2017
Powhatan, VA, US
Age: 25-44
Purchased
12 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
5'7 - 5'9
Value
4 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
a arm
Seemed to be a good kit. I couldn't rate longevity as I have not used them long enough but seem as good or better than stock.
January 30, 2017
LHC, AZ, US
Age: 65+
Purchased
1 year ago
Gender:
Male
Sloppy steering
Tighten up that front end & make the ride smoother. These needle bearings are easy to install, provide smoother movement & tighten up the sloppy movement from the wear of the nylon bushings. These work great !!
May 27, 2016
Tacoma, WA, US
Age: 45-64
Gender:
Male
Weight:
191 - 220 lbs.
Height:
5'10 - 6'0
Works well, Easy install.
This kit utilizes bearings instead of bushing which helps with overall A-arm motion.

The only issue I ran into was that since it is a bearing and not a bushing there isn't a spacer built into the kit and all forward and back play is controlled by the end caps. This seemed to have let them wear out faster than I would have expected. They held up good with left and right play, but not forward and back. I am also a bigger rider who puts a lot of stress on everything while racing so that might have something to do with it.

Overall a good product to replace worn out bushings. Would like to have seen a longer life before wearing out.

Machine this part was bought for: 2014 YAMAHA RAPTOR 700
May 20, 2016
PA
Great
Great upgrade compared to the stock bushings and install was quick and easy for me. Highly recommend.

Machine this part was bought for: 2013 YAMAHA RAPTOR 700R
May 19, 2016
Shepherdsville, KY, US
Age: 25-44
Gender:
Male
Weight:
161 - 190 lbs.
Height:
6'1 - 6'3
Get the job done well.
"twas a lot of work changing all of those little guys. I used an arbor press and that made it easier. take it easy and work slow while putting those seals in. otherwise no issues. worked perfect once installed!

Machine this part was bought for: 2003 SUZUKI Z400 QUADSPORT
September 30, 2015
OH
Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 20 answers
I have a 2005 honda trx 450r how many kits do i need?
Johnny L on Aug 23, 2016
BEST ANSWER: If you're rebuilding the entire front A-arm assemblies, you'll need to purchase 4 sets total as they are sold individually. This means you will need to purchase 2 Upper kits and 2 Lower kits for a complete rebuild.
Do These bearings replace the rubber bushing in th A arms?
A shopper on Oct 4, 2016
BEST ANSWER: YEs they replace the bushings
i need to rebuild both upper a-arms on my 98 yamaha banshee. Will this one kit be enough for me to do both uppers or do i need to order 2 kits? It says under product details this kit is enough to do both uppers but i see under reviews and question people are saying you need 4 complete sets to rebuild both uppers & lowers. can someone please clarify this for me please? need to order these ASAP.
jordan r on Mar 12, 2017
BEST ANSWER: May be different for a Yamaha, but one kit was enough to do both uppers on a Honda 450R. On the Honda the kit is the same for the uppers and lowers, so you could do one side uppers and lowers, or just the uppers or just the lowers with one kit.
I have a 2009 TRX700XX and want to change out the very squeaky front A-arm bushings, how many kits will I need?

One kit for each A-arm or one set of uppers and one set of lowers?

Thanks
Michael B on Jan 7, 2018
BEST ANSWER: 2 sets...one upper and one lower is how it is on my Yamaha raptor does both sides
I just bought this for me 2007 YFZ. Do the washers go inside the dust cover or outside of them??? I am kind of lost here! No instructions
Greg F on Dec 13, 2017
BEST ANSWER: I’m trying to remember. It’s been awhile since I installed those & I recently sold the quad. I think they went on the outside of the seal.
how many kits will i need to completely rebuild the front end of yamaha raptor 700?
A shopper on Aug 1, 2017
BEST ANSWER: One for the upper A-arms.
Will this product fit a 2014 teryx 4?
Tyler W on Oct 13, 2016
BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application.
RM Cash ProgramParts Finder