"Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."
-Dan Thomas, CEO and Founder
Returns
We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.
Warranties
We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.
Have questions?
(Leave email if after hours) Email: sales@rockymountainatv.com Call us: 1 800 336-5437 7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)
We absolutely love Pivot Works wheel bearings! they hold up they are rugged and fit like a glove every time we need to use them! Forget all balls and the other brands Pivot owns my business
I ordered 2 sets. One for a Raptor 350 and another for a Raptor 700. The 700 went flawless, the 350 had one bearing that would not slide over the axle collar. Was referred to Pivot Works customer service who sent me another set after I sent him the bad set. Fluke issue, would definitely order again.
Good product for a good price. I took my bearing carrier out & cleaned out up them put the bearings in the freezer & the carrier in the oven on 175°F for about a half hour. Then took them out to my barn & packed some grease in the carrier & wala the bearings went in nicely. I even seated one by hand don't have much riding time on them yet but so far so good
Inexpensive alternative to oem bearings. Purchasing in a complete kit with seals and orngs is nice!! I've used pivot work bearings in some of my other atvs, good stuff.
Machine this part was bought for: 2008 SUZUKI LT-R 450 QUADRACER
Bearings came securely packed, went right in after putting them in the freezer overnight and a little help from a bearing driver and hammer. Nice complete kit. Only complaint would be that 2 of the carrier o rings that come in the kit were stretched out and a pain to keep seated during assembly.
Machine this part was bought for: 2007 YAMAHA RAPTOR 700
pivot works are the only aftermarket bearings i run in my machines... always perfect fit and long life.... thanks RM for that speedy delivery and like always the correct part
I can't tell you how many bearing jobs I did on banshees and warriors over the years, but Pivot Works bearings are quality and easy to install. Nice product.
I had all balls bearings but they lasted 1 season. Im on my third season with the pivot works bearings and theyre still holding up with almost no play. If you install them right they will last for quite some time...
I bouhgt these bearings over all balls because they were more expensive thinking that they would last longer. I maid a bad choice the bearings lasted a little over three months and now i need to replace them agian.
Bearings seized up within three months, thats with very little mudding, ok product but use plenty of waterproof grease. I went to all balls and have had alot better luck.
Well, I'm on about my 3rd set of these pivot-works rr-axle bearings. I only get about 1 season out of them before they have excess play in them. I have a new carrier & axle, so it's not wear on either one of those items. I just don't think the quality is in the bearings from the start. Whenever I pull the carrier apart, it's always slopped w/mud & dirt on the inside, so I'd say the seals are crap & not doing their job. Maybe that's the whole problem - bad quality seals?? I'm going to try a different brand next time around to see if I can get any longevity out of a different kind. The stock bearings/seals lasted over 2 yrs & now I can't even get 1 yr out of Pivot-works. I would not recommend this product for an aggressive rider.
i have gone through two sets of OEM bearings before i bought these and installed them my self. so far they are holding up very well. they fit great and so far have exceeded my expectations.
I recently put these bearings in when i put my new axle in. If you can't decide in between the other bearings and these ones, belive me, spend the extra ten bucks, these ones are way better. They went into the carrier fairly easy, and last a long time. just go ahead and trust me on this one, reach deep and find another ten bucks for the freakin things.
If you ride hard, don't mess around. get rid of those sloppy stock bearings and get something that can take the abuse. I installed these bearings over a year ago and have ridden a ton since then and they are as tight as the day I put them in. Just remember to put the spacer in between the two and put a decent amount of marine grease on both sides of the bearing. trust those seals ,their good!
BEST ANSWER:I think it is the same but to double check sign into rockymountainatvmc.com and put it under machine profile and look at the parts for my machine. I use a lot of pivot works bearings unfortunately I broke the rear end house and bought a nice lonestart off this site
BEST ANSWER:I think it is the same but to double check sign into rockymountainatvmc.com and put it under machine profile and look at the parts for my machine. I use a lot of pivot works bearings unfortunately I broke the rear end house and bought a nice lonestart off this site
I have a 2014 Rancher SRA. Does this kit come with both hub bearings for each side? Do i need to order both kits? Little confused about what this kit consist of exactly.
So, even though the bearings are wider they will still work? My hub bearings are bad on both sides. Just trying to be sure this kit includes hub bearing for each side.
So, even though the bearings are wider they will still work? My hub bearings are bad on both sides. Just trying to be sure this kit includes hub bearing for each side.