Acerbis Radiator Scoops

These fit appropriately, but simply aren’t as strong as oem. They broke quickly for me.

Great replacements. Perfect fit and just as strong, maybe stronger, than the OEM plastics.

-m-2018 KTM 300 XC-W (E-Start)--

On time delivery. Perfect match.

-m-DUAL SPORT--

Exact replica radiator shrouds half the price as oem. Perfect fit and color match too.

-m-2016 KTM 350 SX-F--

These went on very easy. The color very closely matched the blue of the YAMAHA. Up close you can see they were slightly different hue. The plastic seems durable... but it gets a little thin as reaches towards the points farthest from where they are attached.
But over-all I don't think you can go wrong with these... especially for an older bike.

-m-1998 YAMAHA WR400F--

Fit just as good as stock, and a little bit stronger feeling.

-m-2018 YAMAHA YZ450F--

Fit perfect and are strong price was great will buy again

Geat item, a little flembsey but fit perfect, looks good on the bike!

Great quality as always from acerbis. Definitely buy again

They fit just like the factory plastics. I've had a couple basic layovers and no damage.

Good shrouds, would recommend them to anyone looking to replace the ones they have.

These radiator guards bolted right up and the fit and finish look great too!

-m-2017 KTM 350 XC-F--

Great fitment, recommend them!

-m-2017 KTM 500 EXC-F--

not a bad fitment. little tight but it can work. price was good and should hold up

good product that installed easily. I didn't rate durability because I haven't subjected them to any abuse yet but they seem as good as stock.

-m-2017 KTM 300 XC-W (E-Start)--

had to replace the scoops when I bought a used 2003 KTM 200 exc. These fit perfectly and look great. Very very close to KTM orange. Highly recommend for anyone looking to replace plastic.

The price was good. The fit is right. They have held up under crashes so far! Not exact color but very close enough.

-m-2005 SUZUKI DR-Z 400S--

Needed to replace the radiator scoops on 2014 Husaberg TE 250. For KTM, 2014 was the last year of production under the Husaberg brand before they switched to Husqvarna brand. It is hard to find non OEM plastics listed for Husaberg at all. Fortunately a 2014 Husaberg is basically the same as a 2014/15 Husqvarna TE 250. The plastics will interchange. However the shade of blue and yellow used on the Husky is different than used on Husaberg. The plastic is also available in white. The OEM scoops where over $100 and would have to be special ordered. Rocky had the Acerbis scoops in stock for less than half the price of OEM scoops. Except for the color difference, the Acerbis scoops matched the shape, fit, and function of the original scoops. They bolted right on just like the original scoops with no issues. I would recommend these as a good replacement for OEM.

These fit perfectly and look great. I just wish my Clarke tank was true YZ/WR blue. Oh well, they look so much better than the WR450F scoops that had been modified to fit. These fit the tank perfectly and my knees no longer have a pump that they ride against. Also, they are wider at the opening allowing more air over the radiator... which is a must for the 450 on technical trails.

Having used Acerbis (Ah-chair-bees, for those unaware) products for years, I assumed these radiator shrouds would exhibit the tell-tale signs of the quality I expected from the venerable Italian brand, and I wasn't disappointed: high gloss flat surfaces, factory-correct textured areas, perfect color matching, and impeccable fit all added up to a satisfying experience. Plus, the various color options allowed some personalization that helps my bike stand apart at the track. Are there other brands that do what Acerbis does? Indeed, but no one does it any better. Buy these and be happy.

-m-2017 HONDA CRF450R--

These fit great on my 14 ktm 300xcw and also the ones i bought for my 16 ktm 250xcf. they look great, little difficult to install but definitely good bang for your buck.

-m-2016 KTM 250 XC-F--

These shrouds are very nice. The color matches well on my Honda and they fit great. When it comes to plastics for dirt bikes Acerbis is the leader and these are no exception.

-m-2001 HONDA CR250R--

Bought these because I purchased an IMS tank. They did not fit very well. Had to modify and still does not fit correctly.

-m-2003 YAMAHA WR250F--

The color matches, and the material seems durable, but the fit was poor. It would not fit without opening up some of the bolt holes with a round file. Definitely not the same as stock - overall, it seemed to have a slightly smaller scale bolt hole arrangement. I made it work, though, so they're on the bike and look good. Figment was a pain. Will pay a little more and go with another brand next time.

-m-2016 KTM 450 XC-W--

Great fit on the 2017 model. Installed quickly and the finish makes the bike look brand new. Save your hardware from your OEM plastics.

-2017 KTM 150 SX--

I was really impressed with the mount quality and finish of these shrouds. Have taken a beating better than my stock ones did.

Love Aceribs, product is always exactly what I wanted and have a great look, fit and are very durable! Never had any problems and will always go to these guys anytime I'm looking for plastic, and Rocky Mountain always has good prices and gets everything shipped out right away!!!!

-m-2000 KAWASAKI KX125--

Easy to install the color matches really well it's a nice fit

-m-2017 KTM 350 XC-F--

easy installation fast delivery fit perfect

-m-2011 HONDA CRF450R--

I have bought these for my ktm twice and the plastics have broken at the radiator mount each time. I had the stock plastics for 2 years without any issues and I went through 2 sets of these within 6 months

Great hard plastics, honda red match and also great quality

Scoops are as good as the originals...great quality!!!

Great price. Fit perfect. Good quality!

-m-2005 HONDA CRF450R--

Fit my sons bike perfect he put them on him self first time he used tools thanks for a great set of shrouds and fast delivery time that's the way all on line shopping should be thanks again Rocky Mountains ATV MC

Fits nice. No trimming needed. Almost perfect fit.

-m-KAWASAKI KX65--

not bad at all for the price, fitment was fine and looks great

-m-2016 KTM 450 SX-F Factory Edition--

They fit perfect on my 03 crf450 and they look great

-m-2003 HONDA CRF450R--

Great fit, everything lined up as it should. Had to heat lower corners and mold them in but is due to the oversize tank on the bike.

Great product always have ran acerbis products will always run them very durable never fade good quality

Great easy fit, bolted right on, no hassle

-m-2004 HONDA CR250R--

This product worded just fine for my son's klx 110. The scoops fit well and of course the bike looks much newer. I would recommend this product.

-m-2007 KAWASAKI KLX110--

Fitment was 4 out of 5. Not as nice as OEM, but it was close enough that it only took a few extra minutes to install. For the price cant complain and they look awesome.

Oem fit without the price tag. Great looking. Would definitely purchase again

Awesome look, great finish. Only reason I give it a 4 instead of a 5 is the fitment...fitting the metal spacers from the stock radiator scoops into the bolt holes proved difficult before I used a mallet and screwdriver. Fitting them onto the bike itself proved a challenge of creativity, I had to seat a few of the bolts then stretch it while trying to seat the final bolt.

I haven't taken them off since the initial install, so I'm unsure whether they've loosened up or gotten easier to install. All in all look great, seem great, just a sucky initial install.

Great fit fast shipping easy to install. Plastic is very durable

They fit perfect and save you big money compared to buying OEM.

You pay for what you get, what you get are very high quality plastics but make sure not to mix and match brands of plastics...they are not the same shades of red.

-m-2003 HONDA CR250R--

I use Acerbis on all of my bikes. The fit is always good and they look good.

If you're installing these on a '16-'17 KTM get ready to have to drill out the bolt holes that mount to the radiator louvers. All my other plastic is oem Ktm and the fit so perfect.

The shrouds fit very good, the plastic is thinner than stock, they've held up good so far.

-m-2016 YAMAHA YZ250--