"Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."
-Dan Thomas, CEO and Founder
Returns
We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.
Warranties
We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.
Have questions?
(Leave email if after hours) Email: sales@rockymountainatv.com Call us: 1 800 336-5437 7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)
I used this for my 2005 honda trx450r. Fitment was great. Ot was a little difficult to keep the creases out of the corners but to be expected. I would recomend an electric stapler because going through the plastic is tough. The grip works great and has a much better feel over stock. My oem seat cover has become so hard and slick over the years. This was a great value and would recomend.
I bought some Klim Dakar pants. Great pants but I found them to be slick on the seat. So I got the seat cover to solve that problem. The cover fits well and provides the extra grip I needed. It's a nice addition to the bike.
I was looking for something that was a bit less grippy than my stock husqvarna fc350 seat cover. This one works great and has the perfect amount of grip for me. Fit is perfect and so far its holding up great.
Holy crap....so needless to say there will be no issues of sliding around on the seat anymore. My fiance and I have a 2005 Honda TRX400EX and the stock seat was shot...holes and just worn out. I ride a lot with my fiance but was having major issues of siding all over the place with that slick stock seat. Yeah yeah I know we ain't supposed to have two of us riding when it's meant for one rider but by gawd I'm gonna ride and I know how to ride. This Factory Effex All Grip Seat Cover is amazing looks awesome, easy install and grabs your butt and won't let go. I highly recommend if you plan on riding a lot you better have riding pants or your butt will be sore!
Cover is nice, used it on my daughters 03 xr50 and it was fairly easy to install. Heating the material before installation makes it stretch much easier. Seems like it will last a while and has way more grip than the original seat.
This is a must have if you want a gripper seat cover. Used for an entire race season and a major crash, and there is no tears, no fade, and no wrinkles after several power washes. Follow instructions carefully and you wont have any wrinkle issues. This was the first cover i ever installed and i love it. Looks as good as day one a year later. Grips well when cornering yet can still slide when you need too. Couldnt ask for better!
I have used this cover on my past 5 bikes. It fits great and holds up well in the woods. I always install it over the stock cover. Double cover holds up great! I wish they didn't stich their emblem on the rear. That is the part that catches in the woods and starts the cover tearing. If you cut it off, you're left with many noticeable holes. Almost too grippy, but it breaks in and feels fine. I have an upholstery shop install it, and find the professional job is worth it.
Machine this part was bought for: 2015 KTM 300 XC-W (E-Start
Easy to install with burly staple gun. Quality is great and lasted a really long time with virtually no wear; aside from color faded a bit over 2 seasons. Hit it with the pressure washer after every ride/race, and held up fantastic.
Provides excellent grip to the bike.
If going from a slick seat to gripper, took a few motos to get use to; can't slide around on the bike like before. But once adjusted, can't stand slick seats any longer.
Machine this part was bought for: 2013 KTM 450 SX-
Great fit and finish. Took only about 20 minutes to install. I recommend purchasing stainless staples so you don't have to worry about rust down the road. A second pair of hands to hold a heat gun makes things go much faster. I have purchased this same seat cover for 3 other bikes and would recommend it to anyone looking to upgrade the look and feel of your bike.
Machine this part was bought for: 2002 KTM 300 MXC
Had a stock cover on the seat for ten years. I go to this seat and not only did it not fit well no matter how tight I pulled it, on my first ride it tore in two places.
Machine this part was bought for: 2005 SUZUKI DR-Z 400
The seat cover went on nice. The grip is great. The only hang up was that it didn't fit super tight. There was a wrinkle across the seat about 6" down from the front. Overall great purchase.
Machine this part was bought for: 2001 SUZUKI DR-Z 400
One of the few companies still making seat covers for older bikes. Fits very well, has seen some good crashes, and several tree limbs jab at it. No tears, no holes, all is good.
Machine this part was bought for: 1995 KAWASAKI KX250
I put one of these covers on my wife's YZ when she got the bike in 2012. She loves the look and feel of the cover. It got a little tear in it last summer in a crash. We looked at all of the available covers, and she wanted this one again, so we are giving it another try.
On the plus side, the cover has good grip and fits very well - it is easy to install on the seat pan. Except for the tear, the three year old cover I removed looked almost as good as the new one I put on.
Machine this part was bought for: 2011 YAMAHA YZ125
This is a great product and is easy to install. FX gives you plenty of material to easily stretch it. I have an upholstery air stapler so this was a five minute install. Love it!
This is an amazing seat cover. A million times better than stock. I've had it for two riding seasons, that consists of racing Hare Scrambles and basic trail riding.
Machine this part was bought for: 2010 YAMAHA YFZ450X
BEST ANSWER:To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
BEST ANSWER:To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
BEST ANSWER:This can be mounted over the OEM cover, however we recommend that you remove it and apply this directly over the seat foam, sometimes the friction between the 2 covers can cause premature wear on the cover from the inside.
BEST ANSWER:This can be mounted over the OEM cover, however we recommend that you remove it and apply this directly over the seat foam, sometimes the friction between the 2 covers can cause premature wear on the cover from the inside.