Tusk Crank Puller/Installer Tool

Tusk Crank Puller/Installer Tool
  • View Larger
  • Video

Tusk Crank Puller/Installer Tool

Part# 1177380002

Our Price: $69.99

MSRP: $79.99 - You save $10.00 (13% off)

Get $3.50 in Quick Cash

View Product Details

5+ In-Stock

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: sales@rockymountainatv.com
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)

Additional Videos

How To Install a Dirt Bike Crankshaft using the Tusk Crank Puller

How To - Split The Cases And Replace Crank Bearings (part 1)

How To - Split The Cases And Replace Crank Bearings (part 2)

RM YouTube Channel

Details

Special Notes:

  • Will not work on: Yamaha Raptor 660, Kawasaki Tecate 250, KTM 125/144/150.
  • A must for assembling vertically split crankcases.
  • Safely and easily pulls crank assembly into crankcase.
  • Heavy-duty steel construction.
  • Includes both male and female M10x1.25mm and M12x1.25mm adaptors to attach to crank assembly.
  • The C-clip adaptor (part # 1329270001) is required for cranks that use a C-clip to hold the primary gear on (common on many Kawasaki models).
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Tusk Crank Puller/Installer Tool Reviews

Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
 
4.8 / 5.0
155 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
133
13
5
3
1
Value
4.7 / 5
Durability
4.8 / 5
Ease of Use
4.8 / 5
Performance
4.7 / 5
Recommend it?
Yes (68)
No (2)
Value
5 / 5
Durability
5 / 5
Ease of Use
5 / 5
Performance
5 / 5
Recommend it?
Yes
puller worked excellent

-m-1998 YAMAHA PW50 YZinger--
October 12, 2018
cherryville, NC, US
Age: 45-64
Purchased
2 weeks ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'4 - 5'6
Value
5 / 5
Durability
5 / 5
Ease of Use
5 / 5
Performance
5 / 5
Recommend it?
Yes
Where was this 20+ years ago!!!
Today with tools like this rebuilding the bottom-end on a 2 stroke is so much easier. Back in the day, all of these tools were dealer (only) when I worked as a mechanic in a Kawasaki/Yamaha shop.
Putting a Crank in at home in the shop is Minutes (and it works perfectly)!!!!

-m-2004 SUZUKI RM125--
October 1, 2018
74801, OK, US
Age: 45-64
Purchased
3 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Ease of Use
5 / 5
Performance
5 / 5
Recommend it?
Yes
good tool
Tool works as advertised. Made crank work smooth and flawless. U sed this 3 times so far and everytime I commecnd myself for buying this! Thanks tusk for making such an affordable tool for us garage mechanics!
September 25, 2018
doral, FL, US
Age: 25-44
Purchased
over 3 years ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Value
4 / 5
Durability
5 / 5
Ease of Use
5 / 5
Performance
3 / 5
Recommend it?
Yes
Applicable usage
I bought it to use on my 2002 Yamaha YZ 85, but it doesn't have a 12mm x 1.00mm pitch adaptor nut for the Crankshaft, so I can't use it yet. I can't fault the quality and value of it though.

-m-2002 YAMAHA YZ85--
September 24, 2018
Kellerberrin, Western Australia, AU
Age: 65+
Purchased
1 month ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Ease of Use
5 / 5
Performance
5 / 5
Recommend it?
Yes
Worked perfectly for installing crank on YFZ450!

-m-2007 YAMAHA YFZ 450--
September 3, 2018
Lewis center, OH, US
Age: 45-64
Purchased
3 months ago
Gender:
Male
Weight:
221 - 250 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Ease of Use
5 / 5
Performance
5 / 5
Recommend it?
Yes
I use this pretty often at work. Works really well on most small engines.
July 25, 2018
Foley, AL, US
Age: 25-44
Purchased
3 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Ease of Use
5 / 5
Performance
5 / 5
Recommend it?
Yes
Just buy it already
Awesome tool. Makes the world a better place.

-m-DIRT BIKE--
July 20, 2018
Toronto , ON, CA
Age: 25-44
Purchased
3 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
6'4 - 6'6
Value
3 / 5
Durability
5 / 5
Ease of Use
3 / 5
Performance
3 / 5
Recommend it?
No
Not bad - doesn't work for many applications
It doesn't work for all applications, your crank may have a special thread that you can't buy at the hardware store, they could at least sell adapters that fit these machines.

It is heavy duty and works nicely once you get past the fit.
July 18, 2018
Marvin , SD, US
Purchased
3 months ago
Value
5 / 5
Durability
4 / 5
Ease of Use
5 / 5
Performance
5 / 5
Recommend it?
Yes
Quality
Buying these type of tools and doing the work yourself pays off and you can trust your own work
May 22, 2018
Westlake , LA, US
Purchased
over 3 years ago
Value
5 / 5
Durability
5 / 5
Ease of Use
4 / 5
Performance
5 / 5
Recommend it?
Yes
Tusk Crank Puller/Installer Tool
Great tool at an affordable price. Makes removal and installation of cranks so much easier and faster. Great quality tool and can be used with many bikes. Used it to do a rebuild on an old bike and it performed flawlessly.

-m-1994 HONDA CR250R--
May 19, 2018
New Braunfels, TX, US
Age: 45-64
Purchased
1 year ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 20 questions Browse 20 questions and 58 answers
What tool would I need to install the left/right oil seals on the crank for a 03 cr250?
Michael B on Jul 25, 2018
BEST ANSWER: We have used sockets (the same diameter of the seal or a little smaller, deep well if possible) and a dead blow hammer. Lightly tap into place.
Anyone try this and the installer on 1970s era Huskys?
John on Sep 26, 2016
Tusk Crank Puller/Installer Tool
Tusk Crank Puller/Installer Tool
Tusk Crankcase Splitter
Tusk Crankcase Splitter
BEST ANSWER: Hey John. I have not worked on those engines in particular but I have used these tools on many others. Before I had the splitter tool it was necessary to make a custom pulling plate for each different set of engine cases because the tapped holes for the pull rods are often not 180 degrees across from each other and the push pin must be straight on to the end of the crankshaft. Using this tool it is easy to centre the pin and then move the slotted arms to line up with two or three tapped holes in the engine case. Remember to make the puller level with the cases so that you pull evenly an the anchor rods. The crank puller/installer is easy to use. It slips over the end of the crankshaft and the threaded/tapped end is used to draw the crank toward the case. Hope this helps, Jay.
Will this work on a 01 honda trx 400ex?
A shopper on Apr 11, 2017
BEST ANSWER: This product came with the most commonly used sizes by maunufactureres. Able to do a variety of cranks. I can't tell you 100% yes but I will say with certainty that it will do the job you need it to do. Parts provided give you a variety of applications not just honda but other brands as well Yamaha , Suzuki , Kawasaki Japan brands. I have used mine on a wide variety of Japan brand dirtbikes, atv's and it does what it's supposed to do! I'm rather happy with its purchase.
Does it come with the 2 straight bars?
Scott G on Jul 5, 2018
BEST ANSWER: Yes it comes with the 2 straight bars.. great tool.. works like it should
I need the crank puller/installer tool and am wondering if I will also need to buy the adapter setup also.? I'm installing a wesico crank in a 2004 CR 250
jared f on Dec 10, 2016
BEST ANSWER: I'm not sure I havnt used mine yet but I'd get a adapter if they have one you can always return it. I am using mine on a KTM so I don't know how different it is.
Will these tools work on an Arctic Cat 650H1?
Eric M on Feb 22, 2017
Tusk Crank Puller/Installer Tool
Tusk Crank Puller/Installer Tool
Tusk Crankcase Splitter
Tusk Crankcase Splitter
BEST ANSWER: I could not tell you for sure. The trick to pulling the crank case is to pull it apart evenly and equally. Not knowing the width I'm just not sure. These tools will do many different crankcase. Sorry I could not help on that one. Best advise would be to call the cat dealer, or measure the distance between the bolts send them to me and I can measure the three spreader legs to see if this will work. It needs to have three points to pull equal.
Will this tool work on a big bear 400?
A shopper on Apr 10, 2018
BEST ANSWER: This is a universal tool and is designed to work on many models, just have to choose the correct accessories.
Could this work to pull a flywheel on a raptor 700 ?
Francis L on Jan 22, 2018
BEST ANSWER: No you would have to buy flywheel puller totally different
Will this tool work with little KTM 50 case?
Dan M on Aug 5, 2017
BEST ANSWER: you may have to get creative with the adapters, i have access to a lathe so i just made the adapters that i needed that this tool doesn't come with, i could have made my own but it was cheaper and faster to get this
It says won't work for KTM 125/144/150. I have a KTM 105 sx. Will it work for that engine?
Scott I on Apr 4, 2017
BEST ANSWER: That I am not sure of. I have a YZ 250 and it worked great for my bike. Both my older brothers have KTMs but theirs are 300's and they haven't had to tear them apart yet. You might want to contact Tusk to get a better idea if it will work or not.
I have a 2006 Suzuki rmz 250 and I have to put my casing back together . I was wondering if I need that c-clip adapter? I have a kawasaki motor in that bike is the reason for the question
Thanks
Gary J on Nov 10, 2016
BEST ANSWER: You don't need the c-clip kits. I looked up your bike and it shows a nut holding on the water pump gear on the right side which means you don't need the kit. If there are threads on the right side of the crank a c-clip kits isn't needed. Certain older KX two stroke need the kit. We have a newer kx 85/100 and it doesn't need the kits.
Quick question, will this fit my 2017 KTM 500 EXC f? Have a blessed day.
Ryan W on Sep 18, 2018
BEST ANSWER: It is made to be universal so just order it for the bike you got it should work
Will this work on a 2001 kx100?
Bill D on Aug 4, 2018
BEST ANSWER: Hi bill
If tou have the rite nut thread it would work great. Its a super nice easy to use tool that comes in handy. There simple to use. Tusk has a great range of quality tools. Hope this helps. Good luck on your project
Will tusk puller and splitter work 4 2005 Honda CR 85?
A shopper on May 22, 2018
BEST ANSWER: Yes. These will work for almost any application.
Will this nifty tool work on a à Montesa Cota 349? Thanks.
Patrick
A shopper on Feb 9, 2018
BEST ANSWER: What is the size of the Crank Nut (Metric ID Size) as this kit comes with a few sizes. If you can report with that info it can be verified.
Will this work on a 530 ktm crank?
Brian B on Apr 2, 2017
BEST ANSWER: I haven't actually used it on a 530 crank, but I haven't seen a crank I couldn't using it on. Works extremely well is well worth the investment if you're into doing your own engine work.
Will this tool work on installing a raptor 700 crank?
A shopper on Aug 30, 2018
BEST ANSWER: Yes. This tool will work with most ATV and MC applications.
I have this tool and it is not working on a 2007 RM 85. what adapter do I need to fit a 2007 RM 85?
Amanda T on Jun 4, 2018
BEST ANSWER: We do have the adapter for that. It is part # 1329270001.
Does this work on a 2012 YZ450F ? Adapters work on flywheel side but not the clutch side. Am I missing something?
William R on Jan 5, 2018
BEST ANSWER: this is not a machine specific too. it will not work for every application.
Does this tool come with the 2 bars?
Jeancarlo R on May 8, 2017
BEST ANSWER: Yes, it does.
RM Cash ProgramParts Finder