Nuetech Tubliss Gen 2.0 (Tubeless) Tire System

Nuetech Tubliss Gen 2.0 (Tubeless) Tire System
  • View Larger
  • Multiple Views
  • Video

Nuetech Tubliss Gen 2.0 (Tubeless) Tire System

Our Price: $94.00

MSRP: $99.95 - You save up to $5.95 (6% off)

View Product DetailsSee stock sizes for your machine (Machine Specs)

Select options above to check availability

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: sales@rockymountainatv.com
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)

Additional Videos

Nuetech Tubliss Gen 2.0 Tire System

Top 4 Products To Prevent Motorcycle Flat Tires

Tubliss Tire System

How to - Nuetech Tubliss Installation Video

Nuetech Tubliss System Spotlight

RM YouTube Channel

Details

    It's hard to find a good balance between the traction of low tire pressure and reducing the risk of pinch flats. Many riders opt for heavy tubes or mousses, but the Nuetech Tubliss Gen 2.0 Tire System is a relatively new solution that uses a clever design to eliminate pinch flats, bad traction, and tubes entirely.

    The Tubliss System works by replacing your conventional inner tube with a smaller, higher pressure insert that hugs the inside of your rim. This creates two separate pressure areas inside your tire. One area inside the high pressure insert, and another lower-pressure area that fills the rest of your tire where your old tube used to be.

    Inflate the high-pressure insert and it locks the bead in place, forming a seal against the rim and acting like a bumper that protects the rim from impact. With the high-pressure insert filled, the lower-pressure area can be inflated like a traditional tubeless tire you would find on a car. With the Tubliss Tire System installed there are no tubes to pinch, plug kits are a more viable repair option, and you can run much lower psi without your bead rolling off since the high pressure air chamber will still have it locked down.

    Plenty of riders swear by the Tubliss System and for many enduro, GNCC, or off-road riders it's a great alternative to a traditional setup. Watch our video above for more detailed information on the Nuetech Tubliss Gen 2.0 Tire System and see if it will work for you.

    Specs:
  • High-pressure tube acts as a bumper to protect rim from impact
  • Inner tube support sidewall better for less folding over
  • Tubliss locks the tire bead 360° around the rim to act as a full circumference rim lock
  • Saves up to one pound of weight over stock tubed design
  • Less unsprung weight in tires can help handling and acceleration
  • Entirely eliminates pinch flats
  • Integrated rim lock near inner chamber valve
  • Repair tire with a simple plug kit
  • Tubliss allows you to run a wider range of pressures
  • Tire temperature is greatly reduced, creating consistent pressures
  • For off-road use only

Nuetech Tubliss Gen 2.0 (Tubeless) Tire System Reviews

Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
 
4.7 / 5.0
188 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
155
20
4
7
2
Value
4.5 / 5
Durability
4.7 / 5
Performance
4.8 / 5
Recommend it?
Yes (111)
No (4)
Value
5 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
No
Love it
I love this. One of the best inventions in dirtbike history, IMHO. So so so much better than tubes. If you get a flat, you can jam in a tire plug, pump it up with a portable bike pump, and BOOM, yer back on the trail in less than 5 minutes!

Love it. LOVE it.
February 7, 2018
beaverton, OR, US
Age: 25-44
Purchased
6 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
4 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
Yes
Running low pressure
I installed these on my DRZ 400. I can run a low pressure 6 pounds or lower . Gray handling and traction. Relatively easy to install. I run tubeless tire slime to Preevent flat tires and inconvenience and downtime. Very satisfied with these. Hope this helps.

-m-2002 SUZUKI DR-Z 400S--
February 5, 2018
LA, CA, US
Age: 45-64
Purchased
3 weeks ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
Yes
Love it, I’m a lighter guy about 135lbs, 10psi or so with Dunlop at81, traction like I’ve never had before. Rocky and muddy eastern pa single track trail works great for me. Feel like it’s easier to mount as an added bonus too.

-m-2007 YAMAHA YZ250--
February 5, 2018
Mohnton , PA, US
Age: 25-44
Purchased
3 weeks ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'4 - 5'6
Value
5 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
Yes
Amazing tubes!!
Fantastic product. Economical for the weekend warriors but outstanding for the pro riders too. This is the way to go if you ride off-road!!

-m-2012 KTM 300 XC--
February 3, 2018
Cabot , AR, US
Age: 25-44
Purchased
1 month ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
Yes
awesome
i run a dessert tire in west coast single track with 2-3 psi and tubliss. works awesome.
January 27, 2018
98230, WA, US
Age: 25-44
Purchased
1 month ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
3 / 5
Durability
3 / 5
Performance
3 / 5
Recommend it?
Yes
It has its ups and downs
I got this for my trail bike so I can fix flats with a plug kit. They are also lightweight and allow you to run whatever PSI you want in your tires.

They do have their hassles that go with them though. They are expensive and you have to check the PSI in the bladder before every ride which requires 100 PSI.

I have had good luck with the rear but the front bladder started leaking after a few months for no reason to I removed it and installed a UHD tube. Not sure if it was bad luck, I might get a new bladder and try it again.

-m-2000 KAWASAKI KDX220--
January 3, 2018
Osborn, MO, US
Age: 25-44
Purchased
11 months ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
4 / 5
Performance
5 / 5
Recommend it?
Yes
MIRACLE PRODUCT
Everything you have heard about this product is true. I out put it on my 300 xcw for trail and desert riding with some Sedona mx907 tires and I have tried a variety of tire pressures. Bottom line:

1. huge Increase in traction!!!
2. Easy and simple to install use plenty of soapy water and follow the instructions exactly
3. So far zero issues and I have about 15 hours on then.

Best tire pressure I have found is 5 psi up front and 0-2.5 psi in the rear.

Finally, the customer service with this company is off the charts. I sliced an inner bladder on install on Monday. Called neutech and showed them a pic, they sent me TWO more bladders overnight for free so I could ride on Friday.

I am a customer for life and after only 15 hours I will never run tubes again.
December 18, 2017
san diego, CA, US
Age: 25-44
Purchased
2 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
Yes
best system ever
Rode on a flat tire for 100 miles because I had to. System held up no problem and held tire on rim. Works great when you don't have a punctured tire. use a new tire when installing for best results.

-m-2007 KTM 450 EXC 4-Stroke--
December 9, 2017
Pleasant Hill, CA, US
Age: 25-44
Purchased
6 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
Yes
Great product worth every red cent
Worth every red cent! Installation can be a bit difficult the first time, other than that no issues, i got flat and rode on it all day about 20 miles of very rocky, steep loose terrain and it performed flawlessly, and didn’t suffer ang damage to the rim or tubeless system
December 8, 2017
Glen, MT, US
Age: 25-44
Purchased
1 year ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
5 / 5
Performance
5 / 5
Recommend it?
Yes
great product
I have been using tubliss for about 7 years and its is great. It save's rims in the rocks even with low air presure for the sand.

-m-2017 KTM 300 XC--
December 8, 2017
Chapsrral, NM, US
Age: 45-64
Purchased
1 year ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 21 questions Browse 21 questions and 218 answers
According to the nuetech installation video, the second hole in the rim is supposed to be four spokes away. On My 2017 Beta xtrainer the value stem and the rim lock are opposite each other, so here lies the question, do I drill a new hole four spokes away? If so I now have three holes in the rim is that ok,if so, do I plug it with something or what?
Shane B on Oct 2, 2017
BEST ANSWER: Yes, follow the instructions and drill the new hole. The kit comes with a plug for your old rim lock hole which is then held in place by the included rim tape. Many older bikes came with two rim locks so don't worry about the extra hole.
What kind of inflator do I need to get the bladder to 100psi?
Andy K on May 9, 2017
BEST ANSWER: Any bicycle pump that can reach 100+ psi. The tubliss inflator valves are schrader type. Bicycle floor pumps work best in the garage. There are some small portable bicycle pumps that will work too. I'd carry one in a hydration pack while trail riding. Road bicyles aften can have 125+ tire pressures so visit a bike shop for best selections.
Can you flip your tire to get the the sharper edge and not have sealing issues with the high pressure bladder?
Tim O on May 14, 2017
BEST ANSWER: I always flip my tires to enjoy that fresh cutting-edge. The important thing with tubeless is to take them on and off without touching the inner red piece. A couple of times of changing you'll be an expert. Additionally I put Stan's no flat in the high pressure tube and in the actual Tire. I have never gotten a flat since I started doing this.
Will this system work on the rear of a 2016 Husqvarna te 300 when I pull my bike up it doesn't show this system just tubes?
lyndon W on Dec 26, 2016
BEST ANSWER: Yes it will. I had it installed on my 2012 KTM 300 XCW. You have to run the right tire or you will have issues. I spent quite a bit of time talking to Nuetech which were very responsive. My buddy and I both had issues keeping the high pressure seal. We both got rear flats in an enduro and road about 30 and 20 miles to the finish with the tire still on the rim. Very impressive. However the tubeless system was smoked and needed to be replaced. I found out later you should run slime, it may help prevent the flat but if you do get one it prevents that inner red tubeless part from getting burned. So I'm told. I stopped using them as I didn't want to buy another rear and it was a pain to keep the high pressure correct. I can say running at 6 psi traction is awesome. Hope this helps.
Do I have to run a certain kind of tire, or will any normal offroad tire work? I know the high pressure tube is 100psi, but what is the most psi I can put in the tire?
A shopper on Dec 8, 2017
BEST ANSWER: You can run any kind of tyre you like.
The tubliss system is aimed towards running lower than conventional tube pressures, (0-10psi) so I'm a little confused as why you want to know the maximum you can inflate to, and I don't think tubliss specify a maximum tyre pressure, so you could really run it as hard a you like, 20 or 30psi not problem, but I don't know why you would.
I typically run about 11 front, 7 rear and 110 in the tubliss. I have run with a flat punctured tyre too and it's not a drama with the tubliss.
does it come with the rim tape?
alex c on Dec 20, 2017
BEST ANSWER: It comes with everything you need to install the system. Make sure you buy a good quality tire mounting lube. Its a little tricky to get the seal, but they work great after that.
Does the tubliss package come with the installation glide plate?
Zac P on Dec 2, 2017
BEST ANSWER: YES, glide plate and installation instructions
tip: use lots Armor All for a lubricant and electrical tape for rim tape,
You can use 9 wraps of standard electrical tape (the electrical tape is my preference when setting up wheels), just make sure NOT to stretch it on. Instead pull a couple feet of tape off the roll, let it relax for a few seconds and then press it onto the rim. Put the first wrap down the center, the next 1/8” off center to one side and then repeat to the offset on other side – then repeat these same layers for 9 wraps. You just need to build up layers over the spoke heads to protect the bladder – remember the tape just protects the bladder from the spoke heads, it does not need to seal in any way. – I prefer this method because the tape is so thin that it has no real edge for the bead of the tire to catch on. This can happen with the thick tape.
can i go back to tubes if something happens?
Jack G on Aug 7, 2017
BEST ANSWER: Yes, no problem. You have to enlarge 1 of the pre-existing rim lock or valve stem holes slightly by drilling and that is the only permanent commitment. I have made the mistake of going back to traditional tubes and didnt cause any problems. Just reminded me of why i went Tubliss in the first place. Forced me to read the directions better. Call Tubliss if you have questions. Their directions are good but they miss a few steps I think are important to a trouble free installation and long life.
II am worried about tire spin on the rim. I am interested in trying on a hillclimb bike (very high horsepower with intense hole shots). We often run extra rim locks. Some even screw the tire to the rim. Can I assume rim locks are not used with this system and how secure is the tire to the rim?
Vincent V on Oct 18, 2017
BEST ANSWER: hello, Vincent, I have this system set up on both my bikes. I have had it for about two years and I can tell you with certainty that your tire will not spin on the rim. The inner tube that sits in the red liner receives 100-110psi. It makes for the best tire bead seal you can get. I have ran the outer chamber tire pressure at 4psi on a 2012 kiwi 450f with plenty of mods and the tire will not spin. you can run them with no air pressure and they wont spin it will just ruin the red liner in about 50 miles or less. Hands down these are the best tubes you can get. Just take your time and read instructions carefully. Always use a new tire or one that is fairly new (less then 2 years old). Be sure to check tire pressure every two weeks or so as the inner tube will generally loose about 20psi a month just from sitting. and yes there is one rim lock attached to red liner gold color Hope this helps answer your question.
What does the "system" come with? Do we need to buy additional items like tape and stuff to make it work?
Andy K on May 8, 2017
BEST ANSWER: It comes with everything as far as parts go I messed up putting my front tire together I scared the red hard liner. I just replaced it before I went riding this last weekend in the mountains. Use lots lots of straight dish soap so things are slick it worked better for me to put the guts on the rim first then put it inside the tire so that the beads are over the out each side do one side then the other it's not easy job any way you do it. Once it's together put some tire slime inside the tire part it just helps a little. Once your up and running you'll like the fact that you sent hitting the rim when you pound through the rocks and let the air down on the rear the tractor is un mached if you have a rekluse clutch to go with it all those obstacles get much easer
How much of a difference is there when running tubliss in the rear only versus both front and rear having tubliss. Also what setup would be recommended for three diferent riding areas? Motocross racing. Enduro or trailriding(i ride in mountain trails while camping so it is not that extreme). Sand dune paddle tire. If you dont know or recommend a different way to run for different situations im all ears. I just got into riding and i would like to know more about what to expect and how to setup for different rides.
Taylor P on Mar 8, 2017
BEST ANSWER: I think is makes the biggest difference in the rear due to the low pressure you can run and the added traction. I don't do MX so can't answer that. But trail and enduro the set up would be the same, run a tire with a stiff sidewall and run low pressure 4-6 psi (some people even run 0) or a little higher if it is a more flexible sidewall. For a paddle tire, I think it would work fine but never tried it, I would call Nuetech and ask them.
Can these still get pinched and leak? I seem to always have problems pinching tubes because I don't change tires or tubes often and wanting to run these but would hate to pinch these.
Brandon B on Oct 15, 2017
BEST ANSWER: I don't think it is possible to pinch the tubliss tube as such, they are very tough. But you have to check your tubliss pressure regularly. Tubliss recommend checking before every ride, I check mine every week and they have usually dropped from the 110psi I set them at to about 85-90psi, and I think most of that air is lost when I'm actually reattaching the pump to the valve. If you fit them well as per the instructions, and check your pressure regularly you shouldn't have a problem. I have had mine for about 2 years now and think they're fantastic, never had a problem or a flat. I use a stainless steel valve cap with the little oring in to help keep it sealed too. I find tyre changes are much easier too with the tubliss system. It isn't for everyone though, if you want to keep it simple and low maintenance I may not be for you, sounds like you don't like to pay a lot of attention to your tyres, it's a personal preference and application choice also. If you want to be able to run really low pressures for maximum traction etc then they're ideal, if you never go below 10 psi then you probably don't need them. I'm currently running 9 and 6psi (front rear) in my 500 doing technical enduro and it's great. Hope that helps.
Why are these for off road only? I am really interested in never getting a flat front at 70 mph.
Richard H on Oct 9, 2017
BEST ANSWER: I ran the Gen 2 for a season and ran over a large busting the high pressure small tube. When this occurred a had only a plug kit. I was not prepared for that incident. I like the Gen 2 but I have since moved to the mousse bib. They aren’t made for road use but solve the getting flats problem. I switch out to heavy duty tubes also depending on what type of ride I will be riding. Sorry I don’t have a pod answer. I don’t think there will ever be a perfect inflation cure for dirtbikes
Good luck
What is the reason for drilling a new hole in the rim 4 spokes away from the factory valve stem hole, why cant you just move the tube and use the original valve stem hole and bead look hole?
ANDREW O on Oct 14, 2017
BEST ANSWER: Honesty that is what I did. I drilled out the rim lock hole bigger and left the inner tube hole alone. I was not going to add an extra hole into the rim if needed. I actually bent my rim and was still able to go back and use the original holes for a tube as wel. The rim lock hole was a little Big but still holds the tire firm.
what about how the tire grips the rim? tube type and tubeless rims are made differently. tube less has NO tire gripe lip, tub-less less have this tire grip lip. this can be a life or death safety issue.
larry j on Jun 29, 2017
BEST ANSWER: The tire still sits against the rim just as it does with a normal tube. The Tubliss system acts like a sandwich and puts pressure against the tire towards the rim making the rim stronger. This is the easiest and best system for someone that is good with routine maintenance. If you are not, you will not do well with them. There are a few things you have to know for them to work perfectly.
The 19in nutechtubless will fit the front wheel on a 2012 crf150f honda dirtbike right?

-Elijah
A shopper on Oct 11, 2016
BEST ANSWER: I don't know if it will fit a front wheel. I think it will but the tubeless is for a rear so it will be slightly lager diameter inner tube. I love the tubliss in the rear. The front has a different feel than a normal tube