Magura Hydraulic Clutch

Choose a vehicle:

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

» Log in to use your Rider Profile Machines
Magura Hydraulic Clutch
  • View Larger
  • Video

Magura Hydraulic Clutch

Our Price: $214.64$284.99

View Product Details

Select type, year, make and model above

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: sales@rockymountainatv.com
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)

Details

    If your bike has a heavy clutch that wears out your hand and causes poor clutch control, the Magura Hydraulic Clutch is a solution that replaces your cable actuated clutch with a smooth pulling, responsive hydraulic clutch lever system.

    Magura’s Hydraulic Clutch operates on the same principles as your hydraulic brakes, and with a built-in fluid reservoir and slave cylinder, this hydraulic clutch makes your lever pull consistent and predictable throughout its range with a pull that’s up to 20% easier than a cable actuated clutch.

    Installation is fairly simple by mounting the components, routing the lines, and bleeding/adjusting the system until it works well for you. The new hydraulic clutch lever will pull easily and smoothly with no pressure points but improved feedback. This makes the Magura Hydraulic Clutch great on tight technical terrain or for use with heavier than stock clutch springs.

    Specs:
  • Hydraulic clutch lever for motorcycles or atvs
  • Replaces lever and cable with hydraulic lever/resevoir, lines, and slave cylinder
  • Up to 20% less force required to pull lever
  • Built-in fluid reservoir and slave cylinder
  • Self-adjusting (no cable stretch)
  • Less maintenance
  • Predictable and consistent feel throughout pull
  • No pressure point fading

Magura Hydraulic Clutch Reviews

Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
 
4.3 / 5.0
77 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
49
14
7
4
3
Value
3.9 / 5
Durability
4.4 / 5
Ease of Installation
4.2 / 5
Ease of Use
4.6 / 5
Fitment
4.0 / 5
Performance
4.7 / 5
Recommend it?
Yes (24)
No (2)
Value
4 / 5
Durability
4 / 5
Ease of Installation
5 / 5
Ease of Use
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
2006 WR450F Works Great Just Get some sort off heat shield for the exhaust. Its a must!!!


-m-2006 YAMAHA WR450F--
April 14, 2018
Lebanon, MO, US
Age: 45-64
Purchased
2 months ago
Gender:
Female
Weight:
221 - 250 lbs.
Height:
6'4 - 6'6
Value
4 / 5
Durability
5 / 5
Ease of Installation
4 / 5
Ease of Use
5 / 5
Fitment
4 / 5
Performance
5 / 5
Recommend it?
Yes
I will always have one on any 450 4 stroke or 250 2 stroke cable bike
Works great, ive had one on an 06 rm 250 and i never really messed with it, it wasnt perfect. Now this one i bought for my 09 yz450f i put a tiny little washer inbetween the piston and mount and adjusted my clutch lever and got it perfect. You may or may not have to mess with it but have no fear, just take a little bit of time to make sure its engaging and disengaging where you want it. It makes a huge difference in clutch pull. They say like 20-30% but its really like 50-65% easier imo. I race woods and ride motocross. I can 1 finger it for quite sometime in the woods. After like 2 hours i might have to use 2.
April 5, 2018
Sterling, IL, US
Purchased
4 months ago
Value
4 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Ease of Use
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
First time using the product
Was surprised how well this worked. I installed some hinson springs in my clutch and was a tad too stiff for my older hands. This went right on my cr125 in 20min and works as intended. Dont have a long term report and probably never will because I dont ride much but all in all nice

-m-2005 HONDA CR125R--
April 4, 2018
Franklinville , NJ, US
Age: 45-64
Purchased
3 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Ease of Use
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Absolutely love it
Best investment of my life. With tendinitis and arthritis in my left wrist it's hard to use a standard cable clutch on my yz250f. This conversion made a huge difference and helped eliminate arm pump and made it so much easier in technical areas. If you don't have one yet this is definitely a must have.

-m-2010 YAMAHA YZ250F--
February 5, 2018
Las Vegas , NV, US
Age: 25-44
Purchased
5 months ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'4 - 5'6
Value
3 / 5
Durability
5 / 5
Ease of Installation
4 / 5
Ease of Use
5 / 5
Fitment
4 / 5
Performance
5 / 5
Recommend it?
Yes
Nice addition to the bike. I’m giving it 4 stars because of the extra work it took to install.
This item took some patience to install. In order to get it to work properly, I had to slightly bend my clutch cable bracket, but no big deal. Also, I had to shim it with washers. It works as advertised and my clutch pull is like butter.
January 31, 2018
Griffin, GA, US
Age: 45-64
Purchased
10 months ago
Gender:
Male
Weight:
221 - 250 lbs.
Height:
6'1 - 6'3
Value
4 / 5
Durability
4 / 5
Ease of Installation
4 / 5
Ease of Use
4 / 5
Fitment
4 / 5
Performance
4 / 5
Recommend it?
Yes
hydro clutch rocks
i like it a lot not much easier than stock for me the bonus is no fade so it stays easy and no maintenance so far over a year later still works like new one finger agustment when needed
January 23, 2018
Hayfork , CA, US
Age: 25-44
Purchased
over 2 years ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Value
4 / 5
Durability
5 / 5
Ease of Installation
3 / 5
Ease of Use
3 / 5
Fitment
5 / 5
Performance
4 / 5
Recommend it?
Yes
Helped my clutch pull but Still have problems.
I bought this for my 2012 CRF 450. I have a full hinson clutch in it as well. It cut my pull down in half, I barley have to pull and its at my bar! That part I love. What I don't like is the clutch engages 2 mm away from my fingers. I am afraid the clutch isn't fully engaging when I shift. I put two spacers in between where it mounts to my motor just like the cable did. Does anyone have any tips on how to get my clutch to engage farther away from my handlebar? Any bit helps! Thanks.

-m-2012 HONDA CRF450R--
January 20, 2018
Parker, ID, US
Age: 15-24
Purchased
8 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Ease of Use
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
great product
Bought this clutch system for my 2012 YZ250f. i only ride woods, and i feel it pulls a bit easier then the stock cable clutch did. when reading through the installation instructions they made it sound like it would require you to oil it and bleed it, but you do not. installation was fairly easy, small modifications to the bike but its all right in the manual. tech support was pretty help full too when i called to ask a stupid question. if i could buy it for my other bike i would.

-m-2012 YAMAHA YZ250F--
December 23, 2017
Bangor, ME, US
Age: 25-44
Purchased
1 year ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'10 - 6'0
Value
4 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Ease of Use
5 / 5
Fitment
5 / 5
Performance
4 / 5
Recommend it?
Yes
Magura Hydraulic Clutch - love it.
Seriously pumped on this product. Install on 2009 Honda 450 R, this install took less then 30 minuets. Have raced twice on it since the install, works perfect.

-m-2009 HONDA CRF450R--
December 3, 2017
Las Vegas, NV, US
Age: 25-44
Purchased
8 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
4 / 5
Durability
4 / 5
Ease of Installation
5 / 5
Ease of Use
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Excellent upgrade, say bye bye to clutch cables
I purchased the fitment RM suggested for the 2015 Yamaha WR450F and it fit my 2015 Yamaha WR250F perfectly. I needed to pull up/back the FMF exhaust spring to obtain the required 4-6 mm clearance where the slave cylinder attaches to the bike. That was important because the clutch and slave cylinder have to move in order to adjust to thermal expansion. Great product and an excellent upgrade to any cable clutch system.

-m-DIRT BIKE--
November 19, 2017
Los Alamos, NM, US
Age: 45-64
Purchased
7 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 26 questions Browse 26 questions and 84 answers
Does the maturation hydraulic clutch fit on a 2014 YZ450f?
A shopper on Mar 7, 2017
BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
will this fit a 2001 yz125?
A shopper on Nov 21, 2016
BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application.
Does the Magura Clutch system come prefilled or do I need to buy the Mineral oil?

Thank you
Charles P on Apr 1, 2017
BEST ANSWER: It came with it pre filled and blead.... It needs to sit in place for 24hrs to make sure any air makes its way to the top. It also normally has a small top off bottle with it. If needed dot4 brake fluid is mineral oil with added friction reducer and currotion inhibitor.
I would recommend purchasing shims( washers that you can grind on belt sander work) to place between the piston and mount if you run a racing or recluse clutch to get throw just right
Is this the gen 2 clutch? With the Metal star adjuster and the one that allows the lever to fold back incase of a crash
A shopper on Jan 27, 2017
BEST ANSWER: It has the metal star adjuster (that seems to adjust itself so I put a small piece of tie wire to hold it in place.
When the clutch assembly is working it is the bomb but I think dirt entering the master cylinder area has caused the clutch to pull in dirt and thus allowing air into the system. I have two friends with the same issue. Bleed them and in half a lap there is air present. I have tried to take the unit apart to clean it and inspect it but I cannot figure out how to pull out the piston assembly. Worked great for a season. I have really bad wrists and this made clutch pull 100 percent easier.
Will this work with a magura hydraulic clutch conversion on a 2015 WR450f?
Michael K on Dec 2, 2016
Magura Hydraulic Clutch
Magura Hydraulic Clutch
Rekluse EXP 3.0 Clutch
Rekluse EXP 3.0 Clutch
BEST ANSWER: Michael - the EXP clutch replaces a portion of the fibers and steel plates that ride in between your basket and hub. The cable actuated models have a pressure plate adjuster built into the new part that comes from rekluse that lets you set the baseline throwout that lets the bike idle yet prevents the clutch from slipping once it engages. Rekluse calls this the "Installed Gap" setting and its what makes the whole deal work.

So yes it should work with your magura because the rekluse adjustment on the yamaha its all part of the pressure plate vs KTM and Husky where the adjustment is part of the hydraulic clutch system.

I really recommend you call ReKluse directly for any questions - their support line is awesome. Reach them at two zero eight four two six zero six five nine. Their install videos and instructions are good and fairly easy to follow. I did it correctly my first try and can install one in a bike in about 40 min now having done several.

In my experience and that of others I know after you have the Rekluse you probably won't care about the hydraulic conversion because you'll let the Rekluse do most of the work for you. I'm a believer. I run them in all my bikes now off road and moto. They can save an expert from the consequences of a mistake and make amatuer riders look like pros on gnarly terrain. Once its in its idiot proof. I wish I'd thought of it. If you got the Magura to make you're clutch pull lighter (I Think yamaha's pull easy stock!) You will notice its a harder pull with the rekluse installed maybe 10-20%. I doubt you'll care though because you won't be modulating the clutch any where near as much yourself -if you're an experienced rider it takes some time to break yourself from the habits and to let the Rekluse do all the work. And it always works.
I guess you can tell I'm a satisfied customer.

Cheers - Jake
Does it come pre filled with fluid?
NATHAN R on Oct 10, 2017
BEST ANSWER: No, the model I purchased came with oil but wasn't prefilled. Install, fill and bleeding the system was easy. Took a little over an hour.
What Else will I need with this to replace my 2009 crf450r cable clutch? Also, can I change the lever once the install is complete? I would like a 1 or 2 finger lever.
Jay S on Feb 24, 2017
BEST ANSWER: I put this hydraulic clutch on a 86 honda fourtrax 250r, it went right on with what came with the product, I have ASV levers on my quad and the lever would not fit the Magura, I don't know if a company is making after market levers for the Magura system or not. It doesnt look any thing like the hydraulic brake lever plus being on the other side it would be upside down
I have a 2016 YZ250X, and the website does not list this as an option when using the vehicle selector. Is there any difference between the standard 250, which it says it fits? I'm mostly wondering because they show the YZ250F and YZ250FX under different categories and don't want to buy this if it won fit mine.

Thanks
Tim B on Feb 15, 2017
BEST ANSWER: As a reply to my own question, I ended up buying the clutch. It was possibly the easiest thing I've done, and is designed/comes with the parts to fit pretty much any setup I've seen so far. Thanks for the help everyone.
What is the gold cap on the slave cylinder for?
steven s on Jun 12, 2018
BEST ANSWER: The gold cap mounted on the end of the slave cylinder is just that and does not require attention in most cases. The cap can be replaced with different variations as needed, such as a rear-mount, depending on the configuration of the bike. The item in the picture on the RMATVMC web site may not look exactly like the one that fits your bike.
Is the Magura clutch for a 2016 CRF 250R still the 167?
A shopper on Mar 8, 2017
BEST ANSWER: I am not certain, I purchased one that is supposed to be for my Banshee. I haven't had the chance to put it on yet though.
Do I have to use the supplied clutch lever? Or can I use the one I already have? The ones I have on my bike are breakaways
Brett T on Nov 18, 2017
BEST ANSWER: Hard to say without seeing the two side by side, but it is doubtful it is compatible with your levers. The lever reacts directly with a plunger for the hydraulic system.
Is this clutch the 167 model?
JoKarol D on Nov 2, 2017
BEST ANSWER: I bought this and it was a perfect fit for my 2012 crf450r not sure what else it fits but they are pretty much universal with some extra adapters and pins that can be purchased
Is this a generation 2 clutch? I need one for my 2016 WR250F and was going to order the direct fitment for the 2016 YZ 250F but wanted to make sure it's the latest generation clutch.
John Mark D on Aug 30, 2016
BEST ANSWER: Yes, these are the Gen 2 Hymec clutches from Magura. Something to keep in mind if ordering it for a WR, the reason we don't have them listed for the WR models is because of the safety switch in the stock clutch perch that requires you to have the clutch pulled to use the electric start. If you plan on putting this on a WR, you will have to override or bypass that switch.
Rocky Mountain, I need one of these for a 2014 Suzuki RMZ-250......you seem to have one for a 2014 RMZ-450, but will it also work for a same year 250???....if so, let me know....if not, can you order me one up???...Thank you.
Shawn S on Apr 27, 2018
BEST ANSWER: Unfortunately that would not work between the two models. I have done some research and we do not carry that one for the RMZ250 models and we do not do special orders at this time.
will the magura clutch from a yzf450 fit on a yz250?
chris m on Apr 11, 2018
BEST ANSWER: No because they require different parts.
Will it fit a honda crf 450x? It only shows the R model.
A shopper on Dec 1, 2017
BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2018 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
Will this fit my 07, KX250F?
Carson E on Aug 19, 2017
BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
What is the Magura part number for the RM Part# 1011630026? Fitment is for a 2005 Yamaha WR450F. I cannot find my vehicle fitment on the Magura website, and want to confirm this works before ordering. Thanks!
Michael A on Jul 7, 2017
BEST ANSWER: The manufacturer number on this for your machine is 0120523-30. If your machine is listed in the drop down menu it will fit your machine.
Does this include the Cnc billet mounting bracket required for 12-15 wr450f's?
Jan-Eric L on May 30, 2017
BEST ANSWER: Yes, this item will come with the machined clutch perch and mounting bracket.
I'm ordering this for a 2009 yz250f, does this system come with the hot start perch. The picture shows it does but I want to make sure before ordering?
MICHAEL C on Feb 2, 2017
BEST ANSWER: This clutch does have the hot start lever attached to it. For bikes that came from the factory with a hot start lever, the Magura clutch comes with one as well.
Can I use my aftermarket clutch lever on it?
AARON B on Oct 24, 2016
BEST ANSWER: No, this requires the Magura clutch lever.
I have a 2001 CR250 with a rekluse auto clutch . Is this comapatable with the rekluse ?
A shopper on Oct 14, 2016
BEST ANSWER: Yes, this is compatible with your Rekluse clutch system.
Is this a complete kit for a 07 CR125 or will we need to buy additional parts?
A shopper on Oct 3, 2016
BEST ANSWER: This is all you will need to install it on your bike.
i have a 2012 kx100 will this fit?
A shopper on Aug 29, 2016
BEST ANSWER: I checked into this and this will not fit your machine.
Is there a version of the Magura Hydraulic Clutch that can be fitted to a 1976 OSSA Phantom( vintage motocross bike)?
A shopper on Aug 28, 2016
BEST ANSWER: We do not have a listing for an OSSA Phantom that will fit this. There might be one that comes close to fitting that you can order for a different machine, but I don't know what direction to point you in to figure that out.
Direct fit for 2003 KX 125, or modification required?
michael a on Aug 24, 2016
BEST ANSWER: When ordered specifically for your machine, it will be a direct fit with no modification needed.
RM Cash ProgramParts Finder