You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
Increase your horsepower and open your motorcycle up to a higher performance level. We have intake parts to increase your machines throttle response and overall performance.
Cameron in MA
Did a rebuild on my KDX220 after the piston skirt fell apart, and these reeds really woke the bike up! Fit the stock reed cage perfectly.
Read All ReviewsDustin in OH
I paired this with the new Lectron Pro Series 38mm with Xcelerator rod. Seems to run pretty well with them. I decided to go with the rad valve because i wasnt sure how old my stock reeds were in my 250X but it was an easy install. I ended up leaning my metering rod 1 full turn lean and that seems to be the sweet spot. Plenty of power and im able to lug and roll into the throttle with no issues, Came with a new gasket and new bolts. The boot was a tight fit with the lectron but just a little bit a wiggling and it popped right in and is super secure.
Read All ReviewsBradley in TN
Bought just to have some replacement. have used some and it works great no complaints.
Read All ReviewsLogan in KS
Super easy install, better airflow and performance on my 95 CR250 based on butt dyno readings.
Read All ReviewsBradley in TN
Great reeds. fit great. just a great overall product I will order over and over again
Read All ReviewsLarry in NC
Seems to be very well made. Only issue is the line is a little too small for the barbs on my YFZ450 carb to stretch and install cold. No problem, a few seconds with a heat gun to soften it up and it stretches easily and returns to size. Fits snug without a clamp, but reused the stock wire clamps. Adds a finished detail to your carb. Had a few inches left over even after making the bowl drain extra long.
Read All Reviews