"Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."
-Dan Thomas, CEO and Founder
Returns
We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.
Warranties
We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.
Have questions?
(Leave email if after hours) Email: sales@rockymountainatv.com Call us: 1 800 336-5437 7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)
The new Fastway Evolution AIR footpegs are now the ultimate pegs in the Universe. Narrowly beating out the industry standard Fastway Evolution 3's for the crown; the new AIR pegs are lighter, stronger, and man do they look good on your bike! Designed and sculpted out of the best 2024 Billet aluminum by Pro Moto Billet elite engineers and machinists, then hard anodized and laser etched for looks- means that the Evolution AIR pegs are NOT your low quality imported run-of-the-mill footpegs. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way.
Weighing in at a scant .60 pounds per SET, the Evolution AIR pegs are 50% lighter than our Stainless Steel Evolution 3 pegs, while being the same size. Put a set on your bike and ride them. You'll quickly agree that they are the best footpegs in the Universe.
Pegs come with all the necessary hardware to install, all sets ship with 24 10mm length cleats, and 24 12mm length cleats.
Lighter than oem, larger pegs for boots, and configurable angle and height. Haven't had chance to ride them yet, so can't comment there. Kind of pricey.
Installed the pegs a month ago. Ridden in open dez and tight single track. Little to foot fatigue. Shifting and brake control is fantastic. Lots of scratches and gouges now. Holding up to the abuse.
I had a pair of the older stainless Fastway pegs for Honda that I switched from bike to bike for about eight years. Now riding a 2017 KTM300XC I liked the stock pegs but wanted the increased leg room that these pegs allow. I would have preferred the stainless evolution III pegs but they were not offered for my bike so I am trying these. So far I like the feel and the lower position but the anodizing wore off after one ride.
Foot pegs fit great and were comfortable. After a couple rides the orange color started to fade and before long they were silver. A simple slide out during a race snapped the left leg off at the pin. Pretty poor quality for such a big name company. I went back to the stock pegs and they have held up much better. Don't waste your money on these pegs.
There not the best looking pegs but good quality and very adjustable for a higher or lower peg height. They did exactly what I wanted and easy to install.
You can definitely feel the half-inch when you ride. No instructions so I had to use the internet (which was limited). Sounds silly for footpegs but these have several options so it would be helpful if Fastway told you how to use them. I ended up installing the sharp teeth (not included) instead of the "screws" that were provided. Paint wore off after one ride. These are pretty cool but I would not purchase them again.
My friend had these on his KTM liked the way they felt so I put some on my Husky. Like the adjustability. They look really cool too. No problems, easy to install.
The tall seats available for KTM made Husqvarna's are only slightly taller than the stock seats. These foot rests are the best answer for my height, 6'4". Went on easy and look good.
I have owned several sets of Fastway's Steel Foot pegs and they have held up great. The only model available for my 16 KTM 250xcf was the Aluminum Fastway Evo Air Motorcycle Foot Pegs Kit, so I decided to give them a try. Within just 3 months of weekend riding, one of the stops completely broke off and the fit kit sleeves have a lot of play in them. I am now back to the stock KTM foot pegs.
these are the worst aftermarket pegs I have ever used. do not use these for MX, your feet will not stay on the pegs if you have your feet anything other than completely flat, I have sidi boots with new soles. the paint or whatever they have on them is rubbing off on the edges after 1 hour of riding. would give no stars if I could.
Replaced the stock KTM/Husky pegs (which bent) with these. Love the adjustable camber and traction pin options, as well as the ability to run the pegs 10 mm lower to ease the transition from seated to standing for the taller folks.
Pegs were great ergonomically and traction wise. A rock took the entire lower lug with the adjuster bolt clean off, which made for a tough day in the woods, but fastway was great and helped me out on a pair of the stainless pegs. Same traction and ergos, just a bit heavier which I'll trade for extra durability.
I have a 2017 ktm xc. these pegs fit and are easy to install. I ride in a lot of rock gardens here in Arizona and both of my pegs are bent back about 1/2". I told fastway about it and they said tuff luck. I would not buy them again.
I'm not sure right off the bat. Mine was for a wr250r and the default kit they sent me had everything I need to get it installed. I'm really liking the pegs too. Really comfortable for stand up riding and they look really nice too.
BEST ANSWER:I'm really not sure. Mine went on a 2017 WR250R and they installed with ease. They are really killer foot pegs, I like them a lot. Not only are they extremely functional they really looks nice too. If you are not 100% sure on the fitment for your bike you might call the sales line to have them confirm the fit. So far I have had really good luck with this online parts fit guide and they have a easy going return policy if there is a problem with the part fit. Good luck, go for it!
BEST ANSWER:I'm really not sure. Mine went on a 2017 WR250R and they installed with ease. They are really killer foot pegs, I like them a lot. Not only are they extremely functional they really looks nice too. If you are not 100% sure on the fitment for your bike you might call the sales line to have them confirm the fit. So far I have had really good luck with this online parts fit guide and they have a easy going return policy if there is a problem with the part fit. Good luck, go for it!