To give our customers the best shopping experience, our website uses cookies.  Learn More

fuel and air intake systems

You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines

Fuel and Air Intake Systems

Fuel and Air Intake Systems

Latest Fuel and Air Intake Systems Reviews – You could win up to $500 for reviewing products!

  • Dynojet Jet Kit

    Skyler in AZ

    Not manufactured as OE jets.

    Upon receiving this kit i noticed that none of the jets were manufactured as the OEM jets. Even the “stock” sized jet was noticeably bigger, it also required an adapter to fit into the bowl. I decided not to use this kit and bought all OE jets. 2000 Honda 400ex with bolt ons.

    Read All Reviews
  • All Balls Fuel Pump Rebuild Kit

    Jacob in WA

    It’s a bad product

    Did not work at all. Put out 15psi it’s supposed to put out 50psi. Would not recommend it.

    Read All Reviews
  • QA Parts Carburetor

    Jeff in IL

    PW80 - Requires Modifications To Work

    You will need to transfer parts from an OEM PW80 Carb to make this work. 1. The metal tube that the choke cable goes into on the carb does not work a PW80. You will need to buy it or have one to transfer. 2. There is a white plastic spacer that sits inside on the intake side of the carb and it is to thick and will not fit the pw80. You will have to reuse the oem or modify it. Also, the idle adjustment screw must be wrapped in Teflon to keep the screw from backing out under vibration when the bike is running. I will say it does work once you make these modifications and it is jetted properly for my pw80 but for an extra $60 I would have just bought the OEM Carb. Remember, there is a reason why it cost less than a quart of 2T Oil

    Read All Reviews
  • Tusk Carburetor Vent Line

    Raymond in OR

    Snug fit; good price and looks excellent

    Nice way to make things look a little more crisp near the engine bay. Replaced my ancient rotted tubes with these. Easy to cut to length and was a nice snug fit on my carb.

    Read All Reviews
  • Tusk Idle Adjustment Screw

    Raymond in OR

    Great aftermarket screw

    Replaced this screw on my keihin carb. Fit fine and is SOOOO much easier to adjust while on the trail than the stock screw. Only minor complaint is that I'm fairly sure it is a little too loose and vibrates slowly out of place. Could just be my retaining spring though. Otherwise awesome replacement. Would do it over again.

    Read All Reviews
  • JD Jetting Jet Kit

    Jesse in NJ

    JD jet kit DRZ400

    The JD jet kit worked great on my DRZ400. Set it up just like the directions said. Definitely a noticed increase in power!

    Read All Reviews
RM Cash ProgramParts Finder