Hammerhead KTM Shift Lever Bolt

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines
Hammerhead KTM Shift Lever Bolt
  • View Larger

    Hammerhead KTM Shift Lever Bolt

    Our Price: $6.99

    View Product Details

    Select type, year, make and model above

    Live Help
    • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

      -Dan Thomas, CEO and Founder

    • Returns

      We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

    • Warranties

      We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

    • Have questions?

      Live Help (Leave email if after hours)
      Email: sales@rockymountainatv.com
      Call us: 1 800 336-5437
      7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)

    Details

    • KTM Shift Lever Bolt with integrated washer and drilled for wire.
    • For full size KTM bikes with tapered shift shaft.
    • Never loose your shift lever bolt again.
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Hammerhead KTM Shift Lever Bolt Reviews

    Each review submitted enters you into a
    $100 gift card monthly drawing and a
    $500 gift card quarterly drawing!
     
    3.2 / 5.0
    33 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    16
    2
    0
    1
    14
    Value
    2.7 / 5
    Durability
    2.3 / 5
    Ease of Use
    3.6 / 5
    Fitment
    3.8 / 5
    Performance
    2.3 / 5
    Recommend it?
    Yes (10)
    No (9)
    Recommend it?
    No
    Believe the reviews. The bolt WILL snap off
    I bought this bolt even after reading the reviews of it snapping off, thinking they were over tightening the it. After installing with "locktight" and tightening to spec, all was good until I was less than a mile into a tight trail....Thanfully I found my shift lever in the mud. Being a hardened 6mm bolt makes it very challenging drilling it out to extract it without ruining the treads. Rocky Mountain ATV/MC needs to read their product reviews so they can take products like this off their site. Don't waste your money, it will be much more costly when the bolt snaps off!

    -m-2008 KTM 200 XC-W--
    November 26, 2018
    Snohomish, WA, US
    Age: 45-64
    Purchased
    1 year ago
    Gender:
    Male
    Value
    1 / 5
    Durability
    1 / 5
    Ease of Use
    1 / 5
    Fitment
    1 / 5
    Performance
    1 / 5
    Recommend it?
    Yes
    Manufacturer defect. Out of square (bent shank)
    Ordered 3 from Rocky Mountain and subsequently contacted Hammerhead who shipped me 3 more. All 6 would bind slightly when threading in and would not seat properly. Found run out of head and shank to be out of square (bent shank). No problem with returns. Use caution, mfg defect. Have Hammerhead shift & Bake lvrs, no problem.
    September 25, 2018
    Floyd's Knobs, IN, US
    Value
    1 / 5
    Durability
    1 / 5
    Ease of Use
    1 / 5
    Fitment
    3 / 5
    Performance
    1 / 5
    Recommend it?
    No
    Head Broke off at OEM torque value
    simple bolt replacement however i have a NM wrench when i put it to factory spec, the head broke off. Waste of money for sure. just use the oem bolt. And if it matters that much that its black, paint the head of your OEM bolt.

    -m-2008 KTM 300 XC-W (E-Start)--
    July 22, 2018
    Twentynine Palms, CA, US
    Age: 25-44
    Purchased
    1 year ago
    Gender:
    Male
    Weight:
    191 - 220 lbs.
    Height:
    5'10 - 6'0
    Value
    1 / 5
    Durability
    1 / 5
    Performance
    1 / 5
    Recommend it?
    Yes
    Sheared off inside of shifter shaft
    Terrible experience for me. I torqued this to spec (7.4 ft/lbs) on a 2014 KTM 300. Ride it around the block and came back to the garage to recheck tension and the bolt head sheared off. I spent the night going to the hardware store and spending around $25 to get the tools necessary to extract the bolt from the shift shaft instead of riding. Don't water your money on this!!!!
    June 27, 2018
    Ammon, ID, US
    Purchased
    9 months ago
    Value
    1 / 5
    Durability
    1 / 5
    Ease of Use
    1 / 5
    Fitment
    1 / 5
    Performance
    1 / 5
    Recommend it?
    No
    add me to the snap list
    installed this screw one night, then had buddies over a few nights later. one was fiddling with the bike... touched the gear shifter... shifted down with his hand - gently- and the screw broke!!! he felt SOOOO bad but I assured him it wasnt his fault, especially after reading these reviews. this screw sucks!!
    June 19, 2018
    Calgary, AB, CA
    Age: 25-44
    Purchased
    10 months ago
    Gender:
    Male
    Weight:
    191 - 220 lbs.
    Height:
    6'1 - 6'3
    Value
    5 / 5
    Ease of Use
    5 / 5
    Fitment
    5 / 5
    Recommend it?
    Yes
    My 2016 KTM 250xc has always had an issue with the shifter bolt vibration loose. Happened to me during a hare scramble, ordered this, safety wired it to the shifter itself, no longer an issue.
    April 28, 2018
    Denver, CO, US
    Purchased
    1 year ago
    Value
    3 / 5
    Durability
    1 / 5
    Ease of Use
    5 / 5
    Fitment
    5 / 5
    Performance
    1 / 5
    Recommend it?
    No
    total failure
    the bolt, after about 10 service hours snapped out in the middle of no where.It broke off just inside the face of the shift shaft.I upgraded to this after others were losing their stock bolt,which I never had any problems with.I now have to try to drill out the broken bolt after getting better bits today, that will hopefully drill into this bolt. We shall see

    -m-2013 KTM 500 XC-W--
    April 23, 2018
    newmanstown, PA, US
    Age: 45-64
    Purchased
    11 months ago
    Gender:
    Male
    Weight:
    251 - 280 lbs.
    Height:
    6'1 - 6'3
    Value
    3 / 5
    Durability
    4 / 5
    Ease of Use
    5 / 5
    Fitment
    5 / 5
    Performance
    4 / 5
    Recommend it?
    Yes
    Oh Dang
    If you are looking for a shift lever bolt to do what a shift lever bolt was born to do then you need to get yourself this little beauty. I unboxed her, took one look, and realized she was the shift lever bolt that I was looking for. I don't use the term "flawless" often but I will pull it out in this case. She's a dang flawless example of what a shift lever bolt should be. Hands down will buy again if the need ever arises.

    -m-2005 KTM 450 MXC 4-Stroke--
    February 21, 2018
    Roanoke , VA, US
    Age: 25-44
    Purchased
    over 2 years ago
    Value
    5 / 5
    Durability
    5 / 5
    Ease of Use
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Shift lever bolt
    Top design puts great equal pressure on lever to keep a good tight bite on the chinsey ktm splined shaft design! Long enough to use a fair amount of threads to reduce chances of stripping when tightening. Plus it's a 10mm rather than a wimpy 8mm. Must have product to protect your lever from getting wollered out.

    -m-2010 KTM 300 XC-W (E-Start)--
    February 13, 2018
    Floyd’s Knobs, IN, US
    Age: 45-64
    Purchased
    1 year ago
    Gender:
    Male
    Weight:
    161 - 190 lbs.
    Height:
    5'10 - 6'0
    Value
    1 / 5
    Durability
    1 / 5
    Ease of Use
    1 / 5
    Fitment
    1 / 5
    Performance
    1 / 5
    Recommend it?
    No
    Broke in half after 8 miles
    Don't buy this, I put it on a KTM 500EXC and it broke after 30 minutes...it was torqued properly at 14NM. Had to drill out the half that stayed in and got it out thankfully...could cost you a tear down!

    -m-2016 KTM 500 EXC--
    User submitted image
    Added Feb 2, 2018
    February 2, 2018
    Summerville, SC, US
    Age: 25-44
    Purchased
    1 year ago
    Gender:
    Male
    Weight:
    221 - 250 lbs.
    Height:
    6'4 - 6'6
    Each question or answer submitted enters you into a:
    $100 gift card monthly drawing and a
    $500 gift card quarterly drawing!
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 3 answers
    What is the torque spec on this KTM 950 SE shifter bolt?
    A shopper on Feb 24, 2018
    BEST ANSWER: On my 2018 KTM 450 EXC-F the torque value is 14Nm or 10.3 lb ft. I got this torque value from my owners manual. It also recommends to use loctite. I usually use blue loctite on most of my bolts.
    RM Cash ProgramParts Finder