Handguards

Latest Hand Controls Reviews – You could win up to $500 for reviewing products!

• 

  Fasst Flexx 1 1/8" Handlebar

  Joshua in PA

  I cannot tell a single difference between these and...

  **I BOUGHT THESE FROM THE MANUFACTURER DIRECTLY, NOT RM.** I bought these specifically to reduce fatigue and arm-pump, and they have honestly not helped with either. I have about 10 hours on them so maybe my opinion could change but I cannot feel any sort of give or shock absorption in these handlebars. I have tried all of the polymers and am currently running the softest possible polymers with only 2 threads showing instead of 3 on the adjustment nut to give it more give and even STILL I think these bars have an extremely harsh feel to them. They feel absolutely no different then the stock 1 1/8" renthal bars that came on my 2013 KTM300XC. I wanted to like these bars so much because of how harshly I suffer from arm-pump (it's my fault because I took a 4 year hiatus from riding) but I even bought the anti-vibration inserts and I notice the SLIGHTEST decrease in vibration with the combo of the 2 products, overall its still very prevalent. Like I said before, I've tried every combo of the polymers and I actually can't tell a difference between any of them. They all feel the exact same. I had 1.5 hours on the stiff ones, 1.5 hours on the medium compound, and currently have 7 hours on the soft ones. They don't feel worse then the stock handlebars, but for over $500 spent on the setup, I should be able to say a little more then "it's not worse". HUGE disappointment.

  Read All Reviews
• 

  Odi Troy Lee Designs Signature Series ATV Lock-On Grips

  Stephen in OR

  Parts Missing & Not very comfortable

  I ordered these for the looks and the locking feature. This would be great if it came with the bolts that are used to lock the end caps in place. I had to go to 3 hardware stores before I was able to get the Odd size/thread pitch. They are also very hard, not awful with gloves but the Scott ones I have on my RMX are better.

  Read All Reviews
• 

  Tusk Brake Lever

  Connor in ID

  Would not recommend

  I haven't had a problem with then brake lever yet but the clutch lever snapped first ride put setting it up against the treen would not recommend feel like cheep Chinese garabe

  Read All Reviews
• 

  Tusk Clutch Lever

  Connor in ID

  wouldn't Recommend

  They Looked like decent levers but they didn't hold up to great the fit great and worked just like they should but went riding once a busted it setting it up against the tree but iff you are just using out to ride around the house I wouldn't worry to much ut if you have chance of falling wouldn't recommend

  Read All Reviews
• 

  Atlas Throttle Lock Cruise Control Throttle Assist

  JOSH in UT

  Junk seriously waste of money doesn’t hold

  Horrible...........!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! It’s not even worth leaving a decent comment about that should tell alot

  Read All Reviews
• 

  Odi V2 Emig MX Lock-On Grips

  Bryan in AZ

  Review for installation on CRF only

  2006 CRF450r. Beware, B Cam for CRF is 1.5mm larger in diameter than stock. Save yourself some grief by screwing in the cable adjusters all the way first thing before you begin. I also had to at carburetor requiring removal of tank. If you don't you risk the throttle sticking. Difficult twisting throttle is clue that the cables are too tight. Haven't ridden yet so can't comment on feel or performance. BTW the cam isn't indexed to the tube, so if you have to change cams, mark position on tube or the EMIG likely will be pointing in wrong direction and you get to do it all over again, and again, and again. All good now after adjusting. They look cool IMO.

  Read All Reviews