ProTaper Contour 1 1/8" Handlebar

This is a "machine-selection optional" part.Please choose a vehicle to see the options specific to your machine.choose from all of the options below and add to cart.

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines
ProTaper Contour 1 1/8" Handlebar
  • View Larger
  • Black
  • Blue
  • Gold
  • Orange
  • Platinum Grey
  • Red
  • Silver

ProTaper Contour 1 1/8" Handlebar

Our Price: $67.50

MSRP: $74.99 - You save up to $7.49 (10% off)

View Product Details

Select options above to check availability

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: sales@rockymountainatv.com
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)

Details

    The Contour bar is ProTaper's best-selling handlebar. Oversize diameter handlebars, without cross bars, were invented, and patented, by ProTaper. This design allows the bar to flex more and absorb impacts better than other bars. This offers the rider more comfort and less fatigue without sacrificing bar strength. The Contour is the most affordable way to get your hands on the most sought after bar design in the world. The Contour handlebar utilizes a computer profiled 5mm wall design and is up to 20% lighter than other bars yet up to 40% stronger.
  • Made from 5mm, proprietary, 2000 series T6 aluminum alloy for superior tensile and yield strength.
  • Most affordable balance between bar fatigue life, impact strength and impact absorbing flex.
  • High tech, stress relieved, shot peen and anodized finish for unmatched durability.
  • Left side knurling provides maximum grip traction.
  • Chemically applied cut lines and alignment grid are scratch and peel resistant.
  • End plugs help keep the elements out of the handlebar tubing and aid in longer grip life.
  • Comes with bar pad.
  • Weighs only 1.55 pounds (720 grams) w/o pad.


WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ProTaper Contour 1 1/8" Handlebar Reviews

Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
 
4.8 / 5.0
217 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
192
19
4
1
1
Value
4.9 / 5
Durability
4.9 / 5
Fitment
4.9 / 5
Performance
4.9 / 5
Recommend it?
Yes (81)
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Gave me feel of being over top of the bike. Will continue to put these bars on all my bikes. Strongly recommend these bars. I love then!
February 25, 2019
Shelby, KY, US
Purchased
1 month ago
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
I love the feel of these very durable handle bars,
my arms use to get tired all the time until I install these bars.
February 25, 2019
stoutsville, OH, US
Age: 45-64
Purchased
8 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
charmichael. need i say more?
best bend. great values. they go on everyone of my yammis!

-m-2019 YAMAHA YZ250FX--
February 23, 2019
langley, BC, CA
Age: 25-44
Purchased
2 months ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Pastrana FMX bend
Installed the Pastrana FMX bend on my crf150rb. The extra height is perfect.
2018 CRF150rb with Pastrana FMX bend
2018 CRF150rb with Pastrana FMX bend
2018 CRF150rb with Pastrana FMX bend
February 12, 2019
Meridian , MS, US
Purchased
1 month ago
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Pro taper bars
Fit perfect and have a nice finish very durable product
February 6, 2019
Spring , TX, US
Age: 45-64
Purchased
9 months ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
ProTaper bars
awesome bars awesome value at Rocky Mountain holds up strong
January 17, 2019
Chandler, AZ, US
Purchased
over 2 years ago
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Looks awesome
Purchased the gold color. My blue machine pops with this accent. Love the oversized bars, feels totally different when riding.

-m-ATV--
January 12, 2019
Warrington, PA, US
Age: 15-24
Purchased
2 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Great product
An amazing product, super strong bar and great looks to your machine highly recommended
January 11, 2019
Hillsboro, OH, US
Age: 15-24
Purchased
over 2 years ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
ProTaper
I have always used ProTaper bars on all my rides. For me it seems to flex and transfer less vibrations to my arms.
January 6, 2019
Auburn, CA, US
Age: 45-64
Gender:
Male
Value
4 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Bars...hold onto kind
Great bars but make sure you get what works for you/ not cheap
November 20, 2018
Damascus , OR, US
Age: 15-24
Purchased
over 3 years ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'4 - 5'6
Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 26 questions Browse 26 questions and 86 answers
what are the size dimensions for the handle bars on my 2015 yz250f I am looking to get new and don't know what to get also tips on long lasting, or strong bars?
A shopper on Sep 7, 2016
BEST ANSWER: I believe they're a YZ high bend from Pro Taper, however, I am not 100% positive. There should be a number on your handlebars, like 027967. If you can find that number printed on the handlebar I might be able to cross reference it for you.
Are these bars good for outdoor track riding?
Carsten T on Jan 31, 2017
BEST ANSWER: Well I believe these bars are a high bend and also a touch narrower than factory. I ride them with a 30mm riser and I love them. I see no reason for them to not perform on a track whether indoor or outdoor. I race Enduro and it's everything to tight trees to wide open. These bars are also incredibly strong. I have had several wrecks at speed and no problems. I recommend them to anyone who rides regardless of riding style. Hope this helps.
Will it fit my yz125 2012 I already had pro taper bars on it and they bent so will this fit?
Charles C on May 10, 2017
BEST ANSWER: If you have over sized bar mounts then yes they will fit your yz 125. Must have 1 and 1/8 inch Handel bar mounts, these bar will not fit into oem mounts.
Going on a 2005 YFZ. Will I need longer throttle\clutch cables running this higher bar?
Matt J on Sep 12, 2017
BEST ANSWER: Contour raptor bend is the highest bar and you will still have plenty of cable.
will these fit an 08 ttr 125?
aidan s on Jan 12, 2017
BEST ANSWER: You'll need to change out your handle bar mounts to fit 1 1/8" bars, or you can buy adapters but you will also gain an extra inch rise if you go that route.
Do the end plugs come out of the bars so you can mount the bark busters into them?
A shopper on Sep 17, 2017
BEST ANSWER: The bar ends have plastic plugs that you can pry out. I run bark busters with mine.
Does this bar come with bar pad?
Seth S on Nov 4, 2018
BEST ANSWER: Mine did.
Will these fit my 2007 KX 250?
Vincent C on Nov 27, 2017
BEST ANSWER: Yes, As long as you have 1 1/8" clamps or universal clamps. However I think the kx's come with 7/8" bars and clamps. look for the Y shaped bars if that's the case rather than the flat type.
Will these bars fit on my 2007 TRX 400EX?
Carson J on Aug 22, 2017
BEST ANSWER: They will fit only if you get the big bar clamp kit or assembly and you may not be able to use the stock bar plastic cover. I got the trail tech assembly for my 06 450er with these. Works great but use loc tight, Honda lock or similar with aftermarket kits
Will 1.25 pro taper bars be good with adv stuff like gps ram mounts etc,?
A shopper on Aug 7, 2017
BEST ANSWER: depends where you plan on adding the accessories. This bars have to taper from 1:1/8in to 7/8in so it's doubtful that you could utilize that area to mount accessories. I would stick to 7/8in bars for your needs.
I have an 06 yz250f, I bought it with Renthal twin wall bars. so my hand controls mount to a 7/8" bar correct? my handguards are for a 1-1/8" so after the twin wall starts its at 1-1/8" do I need to upgrade my perches etc to mount the brake and clutch and a new throttle tube?
Matthew C on May 8, 2017
BEST ANSWER: You do not need to change the perches for your hand controls. The bars are 1 1/8 in the center when they mount to your bike, so those mounts should be 1 1/8. The bars slim down to being 7/8 for your hand controls though, so they take stand clutch, brake, and throttle tubes.
I see it says you can't run lock on grips but aren't all bars the same diameter on the ends?
Ben V on Feb 8, 2019
BEST ANSWER: I have odi lock on grips on mine. They work fine.
what bend for 2005 kx125?
Brandon S on Feb 22, 2018
BEST ANSWER: Bend choice is a personal preference.
Which bend is recommended for a taller rider that likes both desert and motocross riding?
A shopper on Oct 12, 2017
BEST ANSWER: There is a "high" bar that would probably work well. An even better option to me would be to figure out which bend you like regardless of height and then add handlebar risers - best of both worlds. I love the RM mid bend, it's perfect for woods and I suspect it would fare just fine on the track.
SW-MOTECH Handlebar Riser
SW-MOTECH Handlebar Riser
which size would have the same rise and height as my oem 2004 honda trx450r handlebars?
flavio m on Sep 12, 2017
BEST ANSWER: Not sure - go to the ProTaper and Renthal websites - they have schematics that show measurement - you have height/widt/sweep/countour(i I think that's what it's called - it's the angle of the bend). But there you can see how they measure - you can measure yours (allowing for assumed bend in your bars if broken) and match up. Unless you want really high bars or really low bars, most of them are going to be in the middle. -u will see on the schematic.
Which would be a direct replacement for a 2015 drz400sm?
A shopper on Nov 18, 2016
BEST ANSWER: Not really sure because I bought mine for a 2015 YFZ450R. You would need to find out if you have 7/8 inch bar clamps or 1 1/8 clamps. From there you just figure out how high of a bend you would like. I recommend going on Pro Tapers website to figure out what the bar dimensions are.
2018 250sx I would like the highest bend for it. What bend would that be? And if I cut 1/8 inch on each side would the lock on grips work?
A shopper on Jan 13, 2019
BEST ANSWER: I got the ProTaper 1-1/8 bar in CR high bend; good for standing. I cut 1/2 inch off each side and the controls would not fit. I would be careful about cutting the bar down - mount it as is first, put your controls on, and see if you can shorten the bar without ruining the control set up...
Will these work on a 06 trx450r?
A shopper on Jan 17, 2018
BEST ANSWER: Work as in fit? It depends if your clamps are designed to take a “fat bar” which is the diameter of the part where it mounts at the base. The part where the grips and controls is the same for all the bars.
After that, it’s about size - height, sweep and bend....for that you can go to the Pro-Taper web site. Renthal has a similar bar and also has measurments. This is all about personal preference.
What bar clamp will I need to use these on my banshee?
ron m on May 14, 2017
BEST ANSWER: You will need the tusk standard to 1 1/8 adapter for the clamps.
Are these made in the USA?
A shopper on Feb 10, 2019
BEST ANSWER: Yes
what bend is the same as a stock yz 450f bars?
A shopper on Oct 18, 2018
BEST ANSWER: It depends on the year. We do have this sweet video https://www.youtube.com/watch?v=FmFj5CLJqg8 that explains measuring bars to find the desired bar for you.
Will these bars fit a
2018 KX250f with the universal rubber mounts kit?
Alan K on Oct 15, 2018
BEST ANSWER: Yes they will.
If the bars ain't the ones I'm looking for is it possible to return??
Andrew D on Jan 31, 2017
BEST ANSWER: Yes, you can return them as long as they are in brand new conditions with all of it's packaging. If you do need to set up a return please make sure to call before sending the item back.
will these fit my 03 cr 125?
A shopper on Jan 26, 2017
BEST ANSWER: If everything is stock on your bike they will not. But if you have a big bar adapter already then you can get these to fit on your machine. All dirt bikes come stock with a 7/8" bar. Hopefully this helps.
What size pro taper contours would fit my 1997 xr 100?
A shopper on Oct 15, 2016
BEST ANSWER: As long as you have the 1 1/8" bar clamps on your machine, they will all fit.
Do these come with the adapters to go from the stock 7/8 to the 1 1/8 these bars require?
Sabrina D on Sep 15, 2016
BEST ANSWER: No, these bars do not come with adapters to go from 7/8" bars to 1 1/8" bars. We do have a few different options for that though.
Tusk Universal Big Bar Clamp Kit
Tusk Universal Big Bar Clamp Kit

ProTaper Contour 1 1/8" Handlebar Sizing Chart

BendWidthHeightPull Back
ATV High Bend31.50"4.75"2.17"
ATV Low Bend31.50"3.74"2.37"
ATV Mid Bend31.50"4.25"2.21"
CR High Bend31.50"3.74"2.37"
CR Mid Bend31.50"3.23"2.24"
Carmichael Bend31.50"3.00"2.17"
Factory Suzuki/KTM Bend31.50"3.63"1.85"
Henry/Reed Bend31.50"3.62"2.24"
KX High Bend31.50"4.25"2.21"
Mini High Bend30.50"3.74"2.00"
Mini Low Bend30.50"2.80"1.85"
Pastrana FMX Bend30.50"4.75"2.17"
Pastrana MX/RM Low Bend31.50"2.91"2.17"
Raptor Bend30.30"5.64"3.41"
Universal Low Bend31.50"2.80"2.17"
Windham MX/RM Mid Bend31.50"3.90"2.13"
Woods High Bend30.50"3.74"2.45"
Woods Low Bend30.50"2.80"2.37"
YZ High Bend31.50"3.31"2.05'
SX Race Bend31.50"3.43"2.13"
RM Cash ProgramParts Finder