To give our customers the best shopping experience, our website uses cookies.  Learn More

ProTaper SE 7/8" Handlebar

This is a "machine-selection optional" part.Please choose a vehicle to see the options specific to your machine.choose from all of the options below and add to cart.

Fits Your Machine

Displaying parts for your 1989 KAWASAKI KX125

ProTaper SE 7/8" Handlebar
  • View Larger
  • Black
  • Blue
  • Jet Black
  • Platinum Grey
  • Red
  • Silver

ProTaper SE 7/8" Handlebar

Fits: 1989 KAWASAKI KX125

Our Price: $62.99

MSRP: $69.99 - You save up to $7.00 (10% off)

View Product Details

Select options above to check availability

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: [email protected]
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)

Details

    The SE bar is ProTaper's 7/8" diameter handlebar designed for riders who still prefer the feel and stability of a cross bar.
  • Made from 5mm, proprietary, 2000 series T6 aluminum alloy.
  • Cross bar made from cold forged aluminum.
  • Cross bar clamps CNC machined from 6061 aluminum and adhered with aerospace quality polymer.
  • High tech, stress relieved, shot peen and anodized finish for unmatched durability.
  • Left side knurling provides maximum grip traction.
  • Chemically applied graphics are scratch and peel resistant.
  • End plugs help keep the elements out of the handlebar tubing and aid in longer grip life.
  • Weighs only 1.8 pounds (820 grams) w/o pad.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ProTaper SE 7/8" Handlebar Reviews

Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
 
4.8 / 5.0
212 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
180
28
1
2
1
Value
4.7 / 5
Durability
4.7 / 5
Fitment
4.8 / 5
Performance
4.8 / 5
Recommend it?
Yes (63)
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
beats oem
nice pair of bars beats oem any day dropped once on them so far no bends should last a while

-m-DUAL SPORT--
November 5, 2019
us, NY, US
Age: 15-24
Purchased
1 month ago
Gender:
Male
Weight:
221 - 250 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Great bars at a great price and fit perfectly and enhanced the look of my bike. Thanks guys
November 4, 2019
Henderson, NV, US
Age: 25-44
Purchased
3 weeks ago
Gender:
Male
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Love them!
I recently purchased a set of pro taper atv mid bend bars for my trx450r and absolutely love them!! I am 6,3 and they helped tremendously with how the stock bars feel. The stock bars made me feel like I was leaning to far forward and the pro taper atv mid bend gave the bike a completely new feel!
November 1, 2019
Savannah , GA, US
Purchased
4 weeks ago
Value
4 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Affordable and durable.
They are good durable bar that give a little more of a custom feel on the bike. My son races harescrambles and the bars definitely get put through the ringer. They hold up well.

-m-2017 HONDA CRF150R--
October 22, 2019
Berlin Center , OH, US
Age: 15-24
Purchased
1 month ago
Gender:
Male
Weight:
<100 lbs.
Height:
5'4 - 5'6
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Cool beans
These are sweet. I put the blue ones on my drz400. Makes the bike look so much better and of course adds horsepower. I had the stock ones, broke them, then I bought the tusk handlebars, they’re nice but I broke them also, now I’m giving these a shot. Probably will break them too but dang they look nice!
October 9, 2019
Castro Valley, CA, US
Age: 15-24
Purchased
12 months ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
6'1 - 6'3
Value
4 / 5
Durability
4 / 5
Fitment
4 / 5
Performance
4 / 5
Recommend it?
Yes
ProTaper SE 7/8" Handler Bars
I was looking for a comfortable body position when standing and riding.

these handle bars did the trick. I was able to adjust them to point at which I wasn't slouching and getting worn out with an improper body position. The Handle bars are very well made, I only hand on issue with them. My ignition switch had a plastic nob that fit into a hole on the original handle bars. What I ended up doing is removing the plastic nob and getting a small section of rubber and was able to tighten the ignition switch down with no issue.

-m-2016 HONDA CRF230F--
September 19, 2019
59635, MT, US
Age: 45-64
Purchased
2 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Good
Works great, good fit and finish, would definitely buy again
September 5, 2019
Bunnlevel , NC, US
Age: 25-44
Purchased
over 2 years ago
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Bought these bars for my sons yz 125 because his last set of Protapers were bent. He like these bars better than the last set. The high bend is great and gives him good posture while racing moto.
August 26, 2019
Pittsburgh , PA, US
Age: 15-24
Purchased
3 months ago
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Great for steering
Never had an issue with ProTaper and they'll continue to be my bar of choice. Have their bars on all my bikes.
August 23, 2019
Rogers, AR, US
Purchased
9 months ago
Value
4 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Good performance and look great at the same time
These handlebars well and make for a better ride. They also look fantastic.
August 15, 2019
Clearwater , FL, US
Age: 45-64
Purchased
over 4 years ago
Gender:
Male
Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 31 questions Browse 31 questions and 80 answers
What bend is best for a Honda 400ex to keep as close to stock?
Jonathon G on Jul 17, 2017
BEST ANSWER: The best thing I can tell you is to get a handle bar bend that has about 4 inches of rise. That will get you close to the stock height. The stock bars have about 4 inches of rise. I hope that helps.
Can I get a black bar pad with the red handlebars?
A shopper on Sep 23, 2016
BEST ANSWER: Unfortunately where this is a kit we can not change the color of the bar pad.
Is it bad to remove the top bar with the pad on it? I am wanting to put these on a raptor 700 and the key clamp is right where that bar is
Harley L on Jun 29, 2018
BEST ANSWER: I would not it will weaken the bars. I would get the bars that’s recommended as a factory replacement are I would relocate the key switch.
would the bars work for my atv ?
A shopper on Oct 26, 2016
BEST ANSWER: It all depends on your atv and where you want your bars. I purchased a set of atv high bend bars and they are just a touch higher than stock on my sons Raptor 250. Unless you are going with bar risers don't use anything other than the atv bends. The bike bends are way too low.
would 7/8 fit on a 1 1/8 clamp?
christian r on Sep 21, 2017
BEST ANSWER: No, they are much smaller. But Rocky Mountain does sell risers that go from 1 1/8 to 7/8. If you want to run risers. Or you could get different mounts.
will these bars work on a 2004 Yamaha banshee 350?
A shopper on Nov 22, 2018
BEST ANSWER: They should work just fine. You will just have to make sure to do measurements for which bend you would like
I would like to get bar as close to stock as possible. What do I need for a 16 kx85?
A shopper on Nov 30, 2017
BEST ANSWER: I'm not sure what comes stock on that bike. This bar is what was on my bike when I bought it. I would call Kawi and see what they say, then buy.
Do the Kawasaki Mini Bend fit well with the KLX140 for a kid(10yrs)?
Jason B on May 18, 2017
BEST ANSWER: Really all depends on rider just as long as the bike accepts the 7/8" bar. Ask your son on what characters does he like and is comfortable with in a bend. Have him sit on the bike with the bars it has and ask if he would like a higher or lower feel,wider or narrower feel and look and the characteristics of the bar and go from there
Just bought this for my klx 110L. And my clutch cable and push start harness is too short. What is the correct replacement?
nick b on Jun 7, 2019
BEST ANSWER: Those are for fullsize bikes, try looking for a minibike bar. Also can tou reroute anything to get the extra length? Sometimes that'll work.
Will these bars fit close to stock on my 02 Yamaha TTR125L?
Cayden T on May 30, 2019
BEST ANSWER: These bars were a perfect fit and bend to my bike, a 2017 YZ250 Yamaha. I would suggest you get the OEM part number from Yamaha for your bike and compare it to the OEM part number for my YZ250. If they are the same then the ProTaper SE 7/8" bars are for you. Good luck, these are great bars.
What size bar pad do these bars take?
DANA W on Feb 3, 2019
BEST ANSWER: 10"
My son has a KLX110 and is feeling a little cramped. Would these bars provide a higher rise than stock, opening up the cockpit somewhat? That's my goal ..... any suggestions.
Joshua R on Aug 14, 2018
BEST ANSWER: I had stock bars on my 125, I replaced with the pro tapers, I never had any issues with being "cramped" after that, the did offer a little rise in the handle height, if the bars are too wide the tips can be cut off which is what I do myself, makes easier to get through tight spaces
where can I buy the clamps that fit these bars?
A shopper on Jul 12, 2017
BEST ANSWER: Your stock 7/8 clamps will work with these bars. If don't have any you can look on rocky mountain website under the oem parts. Pull up the schematic and order oem clamps. The clamps are very very universal from bike to bike.
Will this bar fit a 2005 YZ250F? I don't see a YZ bend option. Looking for a hi rise bar
A shopper on Jun 27, 2017
BEST ANSWER: Yes, believe the cr bend matches stock bars. I used those in conjunction with bar risers to get the feel I wanted.
will these fit a 2007 ktm 65sx?
Joshua L on May 9, 2017
BEST ANSWER: They will fit but they may may not be the ideal width and bend for a mini.

I believe pro taper or renthal produces a "mini" bend 7/8 handlebar that will offer a little more ergonomic profile for a mini and smaller rider.

I hope this answers your question.

Thanks
What is the difference in color between Black and Jet Black?
Wendy H on Mar 6, 2017
BEST ANSWER: Black is more glossy where the jet black is a flat black more full of a finish hope this helps
will these fit a 16 raptor 700r? As in bolt in and bolt out.
Lucas O on Feb 13, 2017
BEST ANSWER: Not 100% sure, but on my son's 2003 Warrior 350 this was a direct bolt on. Should be the same if your raptor's current bars are 7/8".

Didnt have to change anything at all, all levers and controls matched up fine without any modifications.

hope this helps

T
Is the center bar diameter 1 inch and taper down to the 7/8 for the controls? I looked at my stock 04 yz450f and they definitely are 1 in or larger and taper down. However this sight shows these bars will fit.
Jason M on Sep 9, 2019
BEST ANSWER: These r 7/8 inch bars all the way across.
The pro taper fat bars r 1- 1/8 inch across the clamp area. They also don’t have a cross bar
Can the crossbar be removed ?
Paul W on Aug 27, 2019
BEST ANSWER: Yes, you could remove the crossbar...but if you want one without a crossbar, you would be better off buying one that comes without. I think these bars use the crossbar for strength, once removed, you will have weak points at the clamp or lower bend.
Would these bars fit my yz250 2005?
A shopper on Jun 13, 2019
BEST ANSWER: They will fit any clamps as long as they are not “fat bar” clamps
I have a 2017 TT-R230 which bend is closest to stock?
philip z on May 9, 2019
BEST ANSWER: Cr high bend would be closest to stock on the Ttr 230
What size would be best for a shorter person ?
A shopper on May 29, 2018
BEST ANSWER: Most bar have a bend option take a look in the size chart to pick the bend you want . Like the pro taper is offered in a few low bend options. Hope this was of a help to you
What is the difference between black and jet black? Does one have a gloss paint?
Christopher M on Apr 15, 2018
BEST ANSWER: Jet Black is more glossy that just black. Black is a little duller looking but still looks really good. Great handlebars at a good price
I'm buying a Modquad Handlebar Clamp, will these bars be compatible with them. The clamp is made for my 2005 Yamaha Raptor 660?
Cameron V on Feb 26, 2018
BEST ANSWER: Yes if the clamp is for 7/8 bars. If it is a clamp for fatbars then no, you will need 1 1/8 bars.
Will this fit onto stock 2005 Raptor 660r clamps?
Cameron V on Feb 21, 2018
BEST ANSWER: Yes, they should fit.
What is Ricky Carmichael bend?
A shopper on Oct 11, 2019
BEST ANSWER: There is a sizing chart that will show the measurements for each bend. It is located just below the picture of the handlebars.
Any bar end weights on these?
A shopper on Aug 23, 2019
BEST ANSWER: No, there's no weights on them
I have a 1997 Honda cr250 what bars are close to shock. low rise, med rise or high rise? what is the difference between them?
A shopper on Jul 24, 2019
BEST ANSWER: Low. It's a motocross bike. It's all about prefferance . Rake and width is part of the equation as well.
Which bend would be closest to stock Yamaha blaster handlebars?
Austin f on Feb 21, 2019
BEST ANSWER: Dont know. I ordered these for a 2002 Yamaha warrior. Fit great, aggressive feel, makes me want to ride fast! Way better than the originals.
I wanna replace my stock handbar , on my crf250l 2017 , what bend would be closer to stock?
Slava P on Jun 16, 2018
BEST ANSWER: I’d go with cr mid bend

ProTaper SE 7/8" Handlebar Sizing Chart

BendWidthHeightPull Back
ATV High Bend32.00"6.30"3.94"
ATV Low Bend32.00"5.50"3.30"
ATV Mid Bend32.00"5.90"3.00"
Carmichael Bend31.50"3.00"2.17"
CR Low Bend31.50"2.80"2.68"
CR Mid Bend31.50"3.23"2.36"
CR High Bend31.50"3.74"2.45"
Factory Suzuki Bend32.00"3.63"1.85"
Henry/Reed Bend31.50"3.70"2.17"
Honda Mini Bend28.75"4.60"1.97"
KTM 50 Bend25.50"3.15"1.75"
KX Low Bend31.50"2.80"2.36"
KX High Bend32.00"4.25"3.07"
Kawasaki Mini Bend28.75"3.71"1.97"
Raptor Bend30.30"5.63"3.41"
RM Low Bend32.00"2.91"2.17"
RM High Bend31.50"3.23"2.87"
School Boy High Bend28.10"3.46"1.77"
School Boy Low Bend28.10"3.07"1.85"
Suzuki Mini Bend28.75"4.00"1.97"
Windham/RM Mid Bend32.00"3.90"2.13"
XR50 Bend28.50"6.75"1.75"
YZ Low Bend31.50"2.64"2.76"
YZ High Bend31.50"3.31"2.05"
Yamaha Mini Bend28.75"3.90"2.28"
SX Race Bend31.50"3.43"2.13"
KLX 110/DRZ 110 Bend31.49"5.63"1.73"
RM Cash ProgramParts Finder