You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
William in TX
This was very handy since I use the 78sc for sailing and now also on a GS. The enclosure fits the gps well and easy to remove.Read All Reviews
Graham in BC
This is going to upgrade my RZR the quality of this is is perfect and the fit is perfect very happyRead All Reviews
Jim in IL
This is the best and most durable charging base I've used. I highly recommend this if you ride offroad and require uninterrupted power to your garmin Montana. The wiring harness has many wires for various sensors but personally I only use the red and black power wires.Read All Reviews
Anthony in CA
I used this on a 5 day trip in Baja that totaled over 550 miles. I imported my GPX files in an SD card and it worked amazing! Zero issues with see in the bright sunlight, dusty conditions and hot temps. Zero lag or delay when displaying large files of waypoints. It literally worked flawlessly, the mount was as good as a universal mount can be, not perfect placement but it did its job. I only plug I used was the 12v supply to the battery. It did take a full day of riding to get the units internal battery fully charged. Having the ability to unplug it from the bike and bring it inside to review/change the following days trail was awesome. It has so many options thats its fully customizable. I thing I learned was that the internal battery will not charge if the bikes battery is under about 12.2v. So leaving it plugged in on the bike with the engine off didn't continue to charge the battery. Bike had to be started to make enough voltage.Read All Reviews
Brandon in NC
This thing holds my GPSmap 64 perfect and never had it fall off or come loose. I used to worry about it but after hundreds of miles of beating through the woods it stays connected with no issues. I use a bolted mount 1" ball base to hold it to the bikes handlebars for a more solid connection.Read All Reviews