You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
AARON in MI
Works great, but would be nice if the instructions described the wiring a bit better, especially with the full Enduro Lighting Kit that this comes with (I realize it's also sold separately): The Black wire is the "hot", or power supply, wire from your power source (stator or battery). The white and blue are your power out to the headlight. The key point here is the Tusk Enduro Lighting kit does NOT supply power to this switch. Great value here though, and I highly recommend.Read All Reviews
Joe in CO
Quality is decent on these Tusk LED turns, stock turn was sitting on top of my FMF exhaust so i decided to replace with these shorter stalk LEDs. If you are installing on a XR650L, you will need a EP34 led compatible flasher relay, factory connector plugs right in, then run a ground leg from relay into headlight harness grounds. If you want the dash turn indicator to work splice in two 1N4001 rectifier diodes to the indicator (org/blue) wiring otherwise pull the stock turn indicator bulb for easy way out-otherwise new signals will all flash at once.Read All Reviews
Anonymous in IN
Small flush mount turn signals just like I wanted the work great for my dualsportRead All Reviews
Tucker in NV
Let me start this off by saying I haven't rode with it on yet, but I think it will do well and my expectations of the product are high and I think it will hold up well. The battery is nice, the light bar is really nice( I got the 12inch), the charger is nice, and the harness is pretty good. I didn't notice much weight added to the bars and looks pretty nice. The handguards I went with are Acerbis X-Factory. Here are my honest complaints on the product. The mounting brackets are cheap trash, but are pretty difficult to get into a spot I like, and they HAVE to mount handguard mounts. This adds another $50-$80 you have to spend to make this product work correctly. My other thing is the light switch, it is fine and will get the job done, but for the price I would expect something a little nicer. Overall, though I would still recommend to a friend. The bike it's on is a 2009 CRF450R.Read All Reviews
Fred in ME
Installation was a breeze. The wiring harness makes it very easy to install. Install your harness and on off switch, bolt to your battery, plug in your lights and you're done. It Is very bright and would recommend itRead All Reviews