To give our customers the best shopping experience, our website uses cookies.  Learn More

Tusk Handlebar Risers

This is a "machine-selection optional" part.Please choose a vehicle to see the options specific to your machine.choose from all of the options below and add to cart.

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines
Tusk Handlebar Risers
  • View Larger

    Tusk Handlebar Risers

    127482

    Our Price: $18.99$24.99

    MSRP: $22.99 - $28.99 - You save up to $4.00 (14% off)

    View Product Details

    Select options above to check availability

    Live Help

    Details

      The Tusk Handlebar Riser Kit makes it easy to increase the handlebar height on your motorcycle or ATV. Tusk handlebar risers are made from tough billet 6061 T-6 aluminum and come with high-grade 12.9 chromoly steel bolts. Tusk makes handlebar risers for both 7/8" and 1 1/8" handlebars. Additionally, risers are available in both 15mm and 30mm heights. Think of Tusk for quality parts and accessories (such as these handlebar risers) for your motorcycle or ATV!
    • Tusk handlebar risers increase handlebar height by either 15mm (0.6") or 30mm (1.2").
    • Spacers are made from billet 6061 T-6 aluminum.
    • Tusk handlebar risers are complete with strong 12.9 tensile strength chromoly steel bolts.
    • Handlebar risers are available for both standard 7/8" bars and oversized 1 1/8" bars.
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Tusk Handlebar Risers Reviews

    Rocky Mountain ATV/MC gift card Each review submitted enters you into a
    $100 gift card monthly drawing and a
    $500 gift card quarterly drawing!
    WRITE A REVIEW
    4.8 / 5.0
    455 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    382
    53
    12
    4
    4
    Value
    4.8 / 5
    Durability
    4.8 / 5
    Fitment
    4.8 / 5
    Performance
    4.8 / 5
    Recommend it?
    Yes (259)
    No (3)
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Much more comfortable riding position
    I used these in combination with CR High bend bars to achieve a much more comfortable riding position on a DRZ. I have since learned that this riding position is not great for keeping an aggressive off-road stance but what can you do, at least it's comfortable...

    -m-2007 SUZUKI DR-Z 400S--
    May 14, 2020
    Glenwood Springs, CO, US
    Age: 25-44
    Purchased
    over 3 years ago
    Gender:
    Male
    Weight:
    161 - 190 lbs.
    Height:
    5'10 - 6'0
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Simple, effective, and inexpensive!
    Purchased these for my new 2018 Suzuki VStrom 1000XT because I wanted a bit more rise, and these things worked perfectly. Highly recommended!!

    -m-2018 SUZUKI--
    May 4, 2020
    Greenville, SC, US
    Age: 45-64
    Purchased
    2 months ago
    Gender:
    Male
    Weight:
    161 - 190 lbs.
    Height:
    6'4 - 6'6
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    as described
    Work as described at a good value. No issues with fitment.
    May 4, 2020
    Marysville, WA, US
    Purchased
    5 months ago
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Excellent!
    Worked perfectly! Love them!
    It only took minutes to install them.
    April 30, 2020
    Corona, CA, US
    Purchased
    1 month ago
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Good fit and quality
    Amazing quality especially to be so cheap would definitely buy again
    April 30, 2020
    Atwood, TN, US
    Purchased
    1 month ago
    Value
    5 / 5
    Durability
    3 / 5
    Fitment
    3 / 5
    Performance
    4 / 5
    Recommend it?
    Yes
    Nice little upgrade
    The bar risers work well. They were easy to install and made a significant difference in my standing comfort. I like them.
    April 29, 2020
    Sherwood, OR, US
    Age: 45-64
    Purchased
    7 months ago
    Gender:
    Male
    Weight:
    131 - 160 lbs.
    Height:
    5'10 - 6'0
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Bolt on comfort for a good price
    These bar risers are simple to install, took all of 10 minutes including opening two beers. Bolted right up to 2018 KTM XCW, have taken a beating in the last 6 months I've had them. Instantly made standing more comfortable for me at 5'11", way cheaper than some of the alternatives with equal performance.
    User submitted image
    User submitted image
    April 27, 2020
    Southern Pines, NC, US
    Age: 25-44
    Purchased
    5 months ago
    Gender:
    Male
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Quality product, very useful.
    Nice product. Made the handlebars at a much more comfortable height. No loss of stability or anything like that. I am 5'11" with long arms and I felt like a stink bug when I would stand up to go over obstacles. I got the bigger size, I dont think the smaller size would help much.

    -m-2001 YAMAHA WR426F--
    User submitted image
    User submitted image
    April 19, 2020
    San Marcos, CA, US
    Age: 25-44
    Purchased
    1 month ago
    Gender:
    Male
    Weight:
    191 - 220 lbs.
    Height:
    5'10 - 6'0
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Just what I needed
    Plain Jain but what I need and the right price holds up well. Only complaint I have is the hardware for it will rust somewhat easy.
    April 17, 2020
    Pittsburgh , PA, US
    Age: 25-44
    Purchased
    5 months ago
    Gender:
    Male
    Weight:
    221 - 250 lbs.
    Height:
    6'4 - 6'6
    Value
    4 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Put the Handlebars where they belong
    The risers did the job, putting the handlebars where I needed them for comfortable riding while standing on the pegs. Easy installation.

    -m-2007 SUZUKI DR-Z 400S--
    April 16, 2020
    Florence, CO, US
    Purchased
    7 months ago
    Show more
    Rocky Mountain ATV/MC gift card Each question or answer submitted enters you into a:
    $100 gift card monthly drawing and a
    $500 gift card quarterly drawing!
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 31 questions Browse 31 questions and 118 answers
    2007 and up yz250 has 1 1/8 bars from factory. My question is are these risers from 1 1/8 to 1 1/18?
    Steve M on Nov 3, 2016
    BEST ANSWER: Steve, not sure what you mean by 1 1/8 to 1 1/18. You can buy these riser for 1-1/8 bars or you can choose the ones for 7/8" bars and then choose the height you want. my bars are 7/8 and I choose the 30 mm which is about 1 1/8" tall. The 1-1/8 diameter and 30mm tall should fit your bike if it does list them for yours. they are fairly universal as far as fitting on different bikes and they look okay when on. I put these on a 06 KLR and just recently a 2016 DR650. My only concern was cable length but it turns out may cables were long enough. there are other types of risers out there but for the price these seem to be just fine. Hope this helps.
    What size would I
    need for my 2016 Yz250fx, 11/8 or 7/8?
    Jason S on Sep 28, 2016
    BEST ANSWER: The stock handlebars are 7/8", but if you have upgraded to a different size bar, you would need the 1 1/8".
    When ordering when they say 1 is that for 1 riser or 1 set of risers?
    A shopper on Nov 25, 2018
    BEST ANSWER: These are a very good product. They come as a set, two risers. Double check the diameter of your handlebars.
    I have the tusk big bar adapters on right now but I need more height. Do I attach the risers to them or swap them out?
    Alex S on Sep 17, 2018
    BEST ANSWER: There is a brand, maybe Tusk has them too, that lets you pivot the rear part upwards. I had the same problem as you. Ended up having to rotate my bars forward which was not the best solution.
    Does the riser come with top clamp?
    A shopper on Feb 27, 2017
    BEST ANSWER: No, it's just the riser. You should reuse the original top clamps.
    09 KLX250s - Will I need longer cables if I install the 30mm or 15mm risers?
    Brandon L on Jan 23, 2017
    BEST ANSWER: Usually no. You may need to re-route them, but the stock cables should still work.
    Would i need longer cables for a crf100f 7/8, 15mm?
    Diego on Apr 29, 2017
    BEST ANSWER: Have mounted the 30mm risers on numerous bikes and quads (BMW/Yamaha/Honda/Suzuki) and never had a problem with the factory cables. You MAY have to clip a few wire ties to get your mounting and turning sorted out - but then you can reinstall wire ties as needed. Given the above I would say that the 15mm riser blocks will work just fine for you. Ride safe!
    I'm interested in raising the height of my OEM 2009 Kawasaki KX100 handle bars.

    If I get the Tusk 30MM risers would I need longer clutch and front break cables? Any idea what the correct length I would need with the 30MM risers installed?
    A shopper on Dec 28, 2016
    BEST ANSWER: I Installed the same height risers on my 94 kx500 and the oem length cables and such fit without binding. You could just hold your stock parts 30mm up when you turned full lock in the direction that shortens your cable the most to see if you have enough slack.
    Are the fasteners hex bolts? What tools are necessary for installation?
    Mark B on Dec 6, 2019
    BEST ANSWER: Yes they are hex bolts
    You need Allen wrenches
    No big deal
    I have a 2018 Yz250f I’m pretty sure my bars are 1 1/8? they are stock and I’m 6”2im just looking to raise my bars because when I stand up they are a little little short for me and I find myself hunched over a lot while riding the trails just wondering if I should should get the 15mm or30mm? thanks in advance
    landen b on Aug 12, 2018
    BEST ANSWER: At 6.2 i would go with the 30 mm but put your bike on a stand and then stand up and hold your hands where they are comfortable and then have someone measure the distance between your current bars and your hands. You can also rotate bars forward for a bit more height.
    Can you take a bike that has 7/8 and get the 15 mm riser for 1/18 it’s a rm 85 and I want to put 1/18 bars on it?
    Nathan J on May 8, 2019
    BEST ANSWER: I would say no because the perch spacing is different. RM does however sell a pro taper and an ODI brand big bar adapter allowing you to run 1 1/8 bars on a 7/8 perch. It will also give some rise as well due to the design. Tusk makes an option for this as well that I run on an older YZ250 with no issues.
    Will it fit a trx400ex (has 7/8 bars)?
    Paul C on Jan 11, 2017
    BEST ANSWER: They should fit as long as you get them for the7/8 bar but I'm not sure how your handle bars are secured. Each riser is only secured I the bar clamp by two bolts so as long as that matches up you should be fine
    Will these risers work for a stock 2020 Yamaha ttr 230? If yes do I also have to get a longer clutch cable? My dealership keeps saying there's no parts available for the 2020s yet.
    Mandi S on Oct 20, 2019
    BEST ANSWER: The part is a universal part depending on what size your handlebars are. I used a set of the 30mm on my 2002 xr400 and there was plenty of slack in the clutch cable to mount them. They put the bars up pretty high compared to stock. I probably would have ordered both sizes and sent one back.
    Will they fit 2005 rm 65 ?
    Justin H on Sep 15, 2018
    BEST ANSWER: I purchased them to fit my Honda XR250, but according to the website, they are also available for a 2005 RM65. I have never had an issue with Rocky Mountain in regard to returns, so I would not hesitate to order them. If they don't fit, I am sure you could return them.
    Tusk Handlebar Risers
    Tusk Handlebar Risers
    Can these risers be stacked?
    Erika P on Jun 6, 2018
    BEST ANSWER: Yes, but it is dangerous. The added leverage on the screws can rip them out, bend them, or break them off. If you need more height look into Rox adjustable risers. They are a bit more money but well worth it for safety and adjustability.
    Will these fit a 2017 (gen II) Super Tenere?
    Henry S on May 17, 2018
    BEST ANSWER: Depends on the bar size. Standard size is 7/8" but if they are thicker like a Pro Taper size then you would just order that size. I believe Tusk has both.
    Will these work with the GPR steering stabilizer on a 2017 yz250fx?
    joshua p on Nov 26, 2019
    BEST ANSWER: These will not work with the GPR Steering Stabilizer.
    Will these fit my 2008 Yamaha Raptor 700? Pictures look like it would be a great fit!
    MIKE N on Apr 27, 2019
    BEST ANSWER: No idea bud. They don't even say that they fit the 400ex. It says they fit a 450 Honda bike so I took a chance and they fit perfectly.
    Would a 33mm riser fit a klr 605 without changing cables?
    A shopper on Feb 11, 2019
    BEST ANSWER: It should but make sure there is some free play to work with on the cables first. Most bikes have some extra cable play. Done several bikes and always had enough cable
    I have a 2017 yz250fx with stock handlebars witch ones do I need?
    A shopper on May 19, 2018
    BEST ANSWER: s long as you get correct bar diameter....and your cables are long enough.
    Are these risers good enough quality for motocross? I train motocross 4 days of the week on a rough sand track and want to make sure they will hold up fine. I've grown alot lately and my low bars are causing me to hunch over and have bad form. The $20.00 price tag and not having to swap over controls and grips and stuff is enticing. I just want to make sure that these are going to be up to the abuse I'm going to throw at them and not have them fail me while riding. Any input appreciated thx.
    Carson M on Oct 11, 2019
    BEST ANSWER: I've been using these for 2 years on a Yamaha Raptor 700. I'm 6'5" and 265. I ride semi aggressive and have tossed my rig over a couple of times. The risers have never given or moved at all. I hope this helps.
    i need handlebar riser for my 2017 honda cb500x without modification of my cables do you have one?
    Francois B on Jun 6, 2019
    BEST ANSWER: Most bikes have enough slack in the lines to fit these risers
    Pull the slack from your cable and if you have 1 1/4 inches of slack you’ll have no problem
    I have a 2009 Yamaha ttr 125le. The hole centres on the bar mounts are about 33 mm apart. Will the Tusk handlebar mounts fit? I know they fit earlier bikes, but read a review where they did not fit a newer bike.
    Michael W on Jul 23, 2018
    BEST ANSWER: I installed them on a 2009 TTR125L no problem. They'll bolt right up
    Will these fit on my 2017 YZ450FX?
    Jeff S on May 14, 2020
    BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application.
    I have a 2000 Honda XR100, nice fun pit bike. I want to see if I can get more of a rise out of the handle bars, will these work? I chose my machine under selection but it doesn't show XR100, is there another motorcycle selection I can work with ?
    Alex S on Jan 16, 2020
    BEST ANSWER: This is a machine optional part. These are designed to work with 7/8" and 1 1/8" handlebars. If you have that size of handlebars, you will want to select that size and how high you want this to rise your handlebars.
    Will these work on a 2019 kawi kx250f?
    A shopper on Dec 11, 2019
    BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application.
    Will these fit a 2018 crf250l?
    A shopper on Mar 31, 2019
    BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2019 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
    HI, I have a 2017 WR250R and would like to buy TUSK 30mm risers. Would I need extra wires / cables?
    A shopper on Jan 21, 2018
    BEST ANSWER: you should need to. you may have to reroute them to me them have a little more slack but it should be fine with stock.
    Will these fit my 06 LTR450? Just need to raise stock 1-2”s
    justin c on Jan 8, 2018
    BEST ANSWER: if your hand guards are the same kind of mounts as these are then yes it will.
    What is the distance between the hole/screws? I wanted to make sure it fits my CB500X.
    WILLIAM W on Mar 9, 2017
    BEST ANSWER: The holes are oblong to fit many different machines. The center to center measurement is 1-9/16".
    RM Cash ProgramParts Finder