Tusk MX D-Flex MC Handguards

These were very easy to install, with only minor adjustments to the controls. Haven't had to use them yet, but they appear pretty solid for flag style handguards.

-m-2000 KAWASAKI KLR650--

The product is a great fit also great for the price. I do recomend it

Fit great - haven't tested these out on the trail yet but seems to have enough hand protection

2019 HONDA CRF250RX

Not bad for a cheaper handguard. Pretty stiff. Great for the kid bike. Boys haven't broke them yet. Tuff for a single mount style.

Love tusk products they have never let me down great price amazing quality look sweet

An amazing product for an out standing price another home run from tusk.

Tusk handguards protect your hands from roost and brush small tree limbs. Handguards can be positioned independently from levers. Tusk hand shields are durable

Dropped the bike once and it just bent and didn’t break. Pretty flexible plastic guards, and sturdy mounts. Worth the money.

-m-2003 HONDA CR250R--

This is a really great product. The best quality and value are top notch... but it didn't fit my 2017 CRF250L like advertised. In fact, it was way off. I didn't return the hand guards because it was so cheap lol.

If you find out this hand guards fits your bike, order away!

Purchased the wrap around style, but didn't feel like cutting into my throttle tube. Ordered these and they installed quickly and protect well enough from branches and cacti.

Purchased these for my Son's 2018 Oset 12.5. The hand Guards do fit the Oset but they stick out past the end of the bars an inch or two which I figured they would. Purchased them mainly because I though they would look cool and possibly protect the levers. But I did noticed that when he is riding through the desert he is only about as tall as the big sage brush and bushes and the hand guards were doing their job by protecting his hands from the tall sage brush and bushes. Awesome product well made and engineered. Would recommend for a full size bike also.

Nice handguards. Needed to grind a relief in bracket to clear wiring harness from controls to fit properly.
With a little fitting they are fine.
Look great

A little tricky to install on brake lever side. They look good and the price was fair. I just can't tell you too much yet as they are a new install and you want feedback now.

-m-2004 KAWASAKI KLR250--

Great gaurds. A little bigger than I thought they were in the picture, but hey more protection right!

-m-2013 KTM 350 SX-F--

These look great and block wind as they should.

-m-1988 HONDA NX650--

Bought these hand garuds for mt ttr125 and love them the are greand had a werck and they did not have a scrath on them... recomend to anyone

-m-2005 YAMAHA TTR125LE--

These hand guards are great for the price, easy install and seem to hold up fairly well so far.

have had for almost a yr. now and have not broken on me yet. although have not taken any big spills. They are a little flimsy, however maybe they are suppose to be that way so they give instead of break. All in all I think I made a good purchase.

-m-2013 KTM 250 SX--

Not too expensive, and they get the job done as expected. They will bend when you drop the bike at any rate of speed, but they aren't reinforced so to be expected. Perform well for what they're marketed for.

-m-2004 YAMAHA YZ250F--

Purchased for my son's Honda 300EX...The went on without any hassle, protect his hands from brush and cold wind...Good quality and seem to take a pretty good beating...Not bad for the price....Would buy them again...

-m-2003 HONDA TRX 300EX--

First ride in the woods and melted like butter. Very low speed layover and went to pick up the bike...right guard was later almost all the way over.

Really good for the money I had...

Tusk brand is always great quality. Recommend these!

This is a very affordable, very tough set of hand guards. I am not a fan of the wrap around type, but I want to keep the weeds and branches off my knuckles. these do the job better than some more expensive ones I have had. These have dedicated mounts and can be adjusted to almost any position independent of the levers, something you can't do with the type that mount on the lever pivots. Replacement parts are available which is also nice. The logo is a bit dorky, but overall, a great product.

Plastic and aluminum are not ideal together. Drop your bike once and the plastic gaurds are ready for replacement.

Attractive, protective product for track guys who only need protection from roost.

If you're a technical desert guy, drop the $ on all plastic flexible ones or wraparound

mounted the hand guards set close to the housings on the left and right which have all the buttons,start/stop,on,turn signal,high beam. after a bit of loosing both handlevers and removed the little bolt on the bottom of the clutch where the original handguards where mounted,worked great.no problems, got protection right where i need it to be. i like the look, slim..went for test ride did not get loose, all hardware fit, i did watch the video on mounting then and that helped alot. thanks.rm.atv

Installed on our '08 CRF150F and '08 TTR 230. All the protection I need for trail riding. Have survived tip-overs just fine.

Put these on my wifes Yamaha TW200 and they keep the bugs from hitting her hands.

Must have, inexpensive and they do the job. I aim for branches now, knowing they will not be knuckle busters.

These Handgaurds are an easy to install and protect from rocks and brush, but they aren't perfect. Fit is a little off but overall I like them.

Big hand guards but the plastic is thick and looks durable. They are just a little oversized.

If youre tight on loot and NEED hand guards these are the ones to get.

Good fit

I bought these cheaper handguards for the price because I didn't know if I would like them or not. I do like them and for the price you cant beat them. I have crashed several times and they are holding up really good.

these are very nice looking they are easy to put on and they will go on just about everything. the plastic feels tough and no vibration at all they are very stable and i would reccomend these for the price they are!!!!

nice add on

I bought these thinking they were an incredible deal for full aluminum bark buster type handguards. I was wrong, but the quality and design for a roost / wind guard is great. The pictures were hard to determine exactly what I was getting and that is why I am posting a review. The aluminum part is just a stand off from the handlebar for the plastic guard to attach to, there is no aluminum protecting your hands, so I returned them in favor of a future purchase of barkbuster or cycra handguards. Good luck!

bought these for my crf 230 and I laid the bike over three times and these things were bent in half soon as I lifted the bike up they flexed right back out didn't even fade the color... everything that tusk makes is awesome

You need to washer the bolts front and back. The metal is very weak and bends in very small impacts.

Have held up great over a racing season.

bolted up nice. good setup for the money.

I bought a set of these a few years ago and the matched the color of my blue Twin Peaks. So I bought another set for my CanAm...first off the yellow doesn't match the CanAm yellow but that's not the issue. The issue is the metal connector is about an inch or more shorter that the previous set so it won't clear the brake lever, it's pretty much worthless to me at this point so it will sit in the cupboard and collect dust unless I find a kids atv for them to fit on. I liked the first set the second set made changes for the worse.

Great handguards, they were on sale, great buy, perfect for what i wanted which is just roost deflection, fitted the white MX model to my white YFZ450R atv, they fit perfectly & look like a factory fitted item, very happy.

These are pretty durable. my favorite part is the metal mounts

Fast shipping, great product for price!

good product for the price!

great

a must have for all types of riding !

Decent hand guards for a TTR 230

I like the look and performance but wish they mounted right to the perch