"Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."
-Dan Thomas, CEO and Founder
Returns
We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.
Warranties
We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.
Have questions?
(Leave email if after hours) Email: sales@rockymountainatv.com Call us: 1 800 336-5437 7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)
The Tusk UTV Sun Visor was developed with safety and durability in mind. The Tusk side by side sun visor can be adjusted similar to an automobile sun visor, giving you and your passenger a wide range of visibility and sun-blocking action. The quick-adjust locking cam keeps the visor steady even in rough conditions. This sun visor will be a great addition to your side-by-side. When looking for value in UTV accessories, think of Tusk for all of your side-by-side parts.
Easily adjustable, giving you and your passenger a wide range of visibility and sun-blocking action.
Durable billet aluminum roll bar clamps mount in minutes.
The quick-adjust locking cam keeps the visor steady even in rough conditions.
The adjustable, Shatter-proof visor is 33 inches wide and 5 inches tall.
Will not work with full windshield, center mounted rear view mirrors or aftermarket roll cages.
Installed on polaris rzr 1000 2019 rock &trail model
This is my second tusk sun visor and i really like them we ride in the mountains in Arizona and face the sun a lot and without this visor would be very difficult to see etc!
This should be added your first week, for safety’s sake.
How did I live without this? No more holding one hand on the wheel and one out blocking the sun’s rays as a ride completes in the evening. It’s wind contouring I am still mastering, but it sure seems to help in that regard, too. It doesn’t help that I drive in windy areas with cross winds.
-m-2018 POLARIS RANGER RZR XP 4 1000 RIDE COMMAND Edit.--
This thing is great! Cuts down on the wind and dust a bunch and adjusts exactly where you need it to block the sun. We could not believe how much it helps with the wind. You get it at a certain angle and you don't feel wind on your face but rather feel it hitting your chest which also helps push dust out of the cab. Mine is paired with a factory half windshield. I did have to notch my corners because I have a low mounted LED lightbar but you would not need to do this if you had a roof mounted one or none at all.
Installed on a 2017 rzr 1000xp Great product for its purpose. Better than all othe sun visors Be advised you will have to modify your roof if you have a lock polaris lock and ride system. Just knoch out where the visor clamps go and your fine.
This thing is great it not only blocks the sun but when used with a half windshield it blocks a bunch of the cold wind as well. Great for cold weather riding. Great value.
Easy to install (good thing because their were no instructions ) I installed it to swing out because I have a wide angle mirror and a overhead bag on my machine. Took a short 85 mile ride on Wednesday and was impressed with the way it worked.
Seems to be well built although mine arrived scratched, Installation would have been easy except I had to cut some of the OEM stock sun visor to get the clamps to fit.
Is perfect, fit with my roof and poly carb windshield. Even low enough to block sun from the kids eyes in the bump seat and regular seat when Ina booster.
I've been saying for years, I need a sun visor for my RZR. Works perfect to block sun and also with my 1/2 windshield the airflow into your face can be easily regulated. Seems to be well made and was easy to install. Tired of Sun in your eyes? Get one.
Works very well to help keep out the sunshine and on a rainy day. I use it with a half windshield and works wonder. Push forward for less wind in your face and and pull back in you need more air in the cab. Easy to install instructions are very clear and simple.
You will have to make adjustments if you plan to use a roof or full windshield as the clamps are large and in the way. Two people makes the install easier.
I've had this visor over a year now an love it! It's great for blocking out that afternoon sun but I really like it because you can direct the amount of air flow to get get more air moving or if it is too much you can push the visor out to cut off the flow.
Didn't work out with my Polaris Roof at all. I would of had to hack the roof to make the mounting brackets work. It arrived like it was a used one. Kind of scratched up on the visor. To RMATV/MC credit, I was able to return it with not problem. Thank you RMATV/MC for being so customer orientated.
Machine this part was bought for: 2016 POLARIS RANGER RZR 900 TRAI
I have not field tested this yet but appears it will work great. The visor is a very strong solid black shield. The mounting hardware is very strong and well made. I was able to mount it with the factory Polaris rear view mirror mounted. I wont be able to fold the visor all the way back into the cab of the rzr but it will fold all the way forward out of the way and should be fine in that position.
Machine this part was bought for: 2014 POLARIS RANGER RZR 800
That is slightly inaccurate as there is only one part number for this visor #136464001 and it is the same part number for every machine you list as being compatible. If there is only one part number that means the dimensions would be the same for every vehicle and it would be useful information to share. Below is a guy who has this visor on his Wildcat Trail >> a vehicle not listed in your application section. You might sell more if people new the dimensions and can adapt them to their own utv. I know the clamps are for 1.75 inch roll bars but I would also like to know the clamp spacing/
I believe there is only one part number so this should apply to all Tusk visors >> from the inside of the roll bar clamp to the inside of the 2nd roll bar clamp is 20 5/8 inches (measured) outside to outside would be approximately 22 3/8 I think the roll bar clamps are about 7/8" wide (not measured). I measured while the clamps were tightened.
That is slightly inaccurate as there is only one part number for this visor #136464001 and it is the same part number for every machine you list as being compatible. If there is only one part number that means the dimensions would be the same for every vehicle and it would be useful information to share. Below is a guy who has this visor on his Wildcat Trail >> a vehicle not listed in your application section. You might sell more if people new the dimensions and can adapt them to their own utv. I know the clamps are for 1.75 inch roll bars but I would also like to know the clamp spacing/
I believe there is only one part number so this should apply to all Tusk visors >> from the inside of the roll bar clamp to the inside of the 2nd roll bar clamp is 20 5/8 inches (measured) outside to outside would be approximately 22 3/8 I think the roll bar clamps are about 7/8" wide (not measured). I measured while the clamps were tightened.
BEST ANSWER:I had previously ordered a polaris (plastic) roof, and the two could not be used together. I returned the visor. I was unable to get the mounts around the top bar where the roof also connected without cutting up the roof, and I didn't want to cut the roof.
BEST ANSWER:I had previously ordered a polaris (plastic) roof, and the two could not be used together. I returned the visor. I was unable to get the mounts around the top bar where the roof also connected without cutting up the roof, and I didn't want to cut the roof.
I have a Honda pioneer 500 with a roof and a windshield, the mount brackets provided are larger than the rool bar where they have to be attached. I modified the mount size with bushings and the visor works just fine.
yes with very little mod. plus with half windshield you can control air flow to cab (from no air to full air) it is a great prod. would not be without it.
BEST ANSWER:I'm not sure. I installed this on my Polaris RZR 1000. And it REALLY was a major help against the sun! The windshield (or opening) is very high in the 1000 so I needed something. It was a tight fit getting the couplers around the roll bars BUT I was determined and got it installed.
BEST ANSWER:I'm not sure. I installed this on my Polaris RZR 1000. And it REALLY was a major help against the sun! The windshield (or opening) is very high in the 1000 so I needed something. It was a tight fit getting the couplers around the roll bars BUT I was determined and got it installed.
Not sure it is for a polaris razor. I had to grind down the inside of the mounting clamps to work on my can am commander,my bars are 2". but when done it is great and works well.
How dark is visor? The one I have now is black. Can't see through it! Have you squish down and look under it
A shopper
on Nov 2, 2016
BEST ANSWER:Hello there. Yes mine is dark also. Its more like a car sun visor and blocks the sun and wind. If you want something that you can see thru I would suggest buying a plex glass and tinting it yellow. My buddy got one on his rzr and he luvs it.
BEST ANSWER:Hello there. Yes mine is dark also. Its more like a car sun visor and blocks the sun and wind. If you want something that you can see thru I would suggest buying a plex glass and tinting it yellow. My buddy got one on his rzr and he luvs it.
This one is solid black and you cant see through it but it pivots forward or back so you can adjust the line of sight. Very nice to control the air coming through the cab also.
Would this fit a 2010 polaris Ranger xp? it has a hard roof and full windshield just looking to be able to flip it up towards the roof away from the windshield it's a 800 Ranger xp single row of seats not a two row seat model any advice would be great Thanks. ?
BEST ANSWER:we run it will out machines that have windshields. however this will not work with certain windshields. i cannot grantee that it will work with your windshield and roof.
BEST ANSWER:we run it will out machines that have windshields. however this will not work with certain windshields. i cannot grantee that it will work with your windshield and roof.
BEST ANSWER:To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
BEST ANSWER:To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
BEST ANSWER:To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
BEST ANSWER:To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2017 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.