To give our customers the best shopping experience, our website uses cookies.  Learn More

V-Force 3 Reed Valve

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines
V-Force 3 Reed Valve
  • View Larger
  • Video

V-Force 3 Reed Valve

103331

Our Price: $132.99$149.99

MSRP: $148.95 - $175.95 - You save up to $25.96 (15% off)

View Product Details

Select type, year, make and model above

Live Help

Details

    Save yourself the hassle of messing with retaining screws, cheap reed petals, and bad performance by getting yourself the V-Force 3 Reed Valve.

    How does the V-Force deliver its simplicity and performance gains? First, the V-Force 3’s overall design is drastically different than your stock reed valve. The V-Force 3 uses four sets of identical, snap-in reeds so you don’t have to deal with matching up inner and outer reeds. More importantly, four sets of reeds give you double the intake area versus stock reed valves. With double the intake area the air fuel mixture is pulled into your engine much faster.

    That means you get quicker throttle response and less reed stress since each reed does not have to flex or open as wide. In addition, the carbon composite reeds that go in the V-Force 3 last much longer and have less deformation than the flimsy plastic reeds you typically find.

    So when your 2 stroke starts to feel sluggish and bogs, retire your old reed valve for a V-Force 3 Reed Valve and you’ll be surprised by just how much of a difference it will make.

    Specs:
  • Unique design uses four sets of reed valves for better reliability and increased air flow
  • Double the reed tip surface over a conventional reed valve design
  • Increased bottom end, stronger mid-range and longer top-end
  • Greater efficiency due to reduced reed petal travel
  • Screw free design eliminates risk of screws going through motor
  • Screw free design enables super quick reed petal changes
  • Symmetrical reed petals end having to match up "inner" and "outer" reeds
  • Custom air guides specific to each individual application ensure maximum airflow
  • Utilizes advanced composite technology with carbon fiber lay-up and resin system
  • A new reed stop design completely eliminates the need for retaining screws
  • Shaped reed tip surface increases velocity of fuel/air mixture, creating optimal fuel atomization
  • Includes reeds and reed valve gaskets
  • For replacement reeds please order V-Force 3 Replacement Reeds
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

V-Force 3 Reed Valve Reviews

Rocky Mountain ATV/MC gift card Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
WRITE A REVIEW
4.8 / 5.0
141 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
122
15
2
0
2
Value
4.7 / 5
Durability
4.9 / 5
Ease of Installation
4.8 / 5
Fitment
4.9 / 5
Performance
4.9 / 5
Recommend it?
Yes (63)
No (1)
Value
5 / 5
Durability
5 / 5
Ease of Installation
4 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Worth every penny!!!
Really opened up the bike!

-m-2006 KAWASAKI KX100--
February 29, 2020
Demorest, GA, US
Age: 15-24
Purchased
1 month ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'10 - 6'0
Value
3 / 5
Durability
4 / 5
Ease of Installation
4 / 5
Fitment
4 / 5
Performance
4 / 5
Recommend it?
Yes
Faster reed pedals give life to my "outdoor motor"
Only 30 mins on them. I feel a bit of change in overall performance on my short strokin 98 yz250.

-m-1998 YAMAHA YZ250--
February 25, 2020
Las Vegas, NV, US
Age: 25-44
Purchased
1 month ago
Gender:
Male
Weight:
251 - 280 lbs.
Height:
6'1 - 6'3
Value
3 / 5
Durability
4 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
2 / 5
Recommend it?
No
v-force 3
I bought these reeds because my stock reeds where on back order and I did not want to wait. I had better throttle response with my stock KTM reeds. Don't wast your money.

-m-2003 KTM 200 SX--
February 25, 2020
Cypress, CA, US
Age: 45-64
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Ordering and details of product
Opened up alot on both my bikes. Could tell there was improvement in hp after i rode them
February 15, 2020
Bloomington, IN, US
Age: 25-44
Purchased
over 2 years ago
Gender:
Male
Weight:
131 - 160 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Great product purchased from a great company thanks Rocky Mountain!
The V- Force Reeds really smooth out the throttle response and help the bottom and mid range. I put a set on my 2017 TX 300, 2006 YZ 250, and on my 2020 YZ 250X. Improved all three bikes. I will always
run these on 2-strokes. Easy to install just follow instructions that come with them. I think it is a good product. Bikes are used for racing Harescrambles.

-

-m-2020 YAMAHA YZ250X--
January 30, 2020
North Little Rock , AR, US
Age: 45-64
Purchased
2 months ago
Gender:
Male
Weight:
251 - 280 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Great performance
-m-1998 YAMAHA YZ250-- great performance turned my bike into a new machine, this thing rips now
December 19, 2019
Hegins, PA, US
Age: 15-24
Purchased
4 months ago
Gender:
Female
Weight:
191 - 220 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
V-force 3 reeds
This is a Must have on any 2 stroke give the bottom end so much more power and really brings the bike alive!
October 29, 2019
Riverside, CA, US
Age: 15-24
Purchased
5 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Great
Changed the way my bike runs big time, awesome product
September 5, 2019
Bunnlevel , NC, US
Age: 25-44
Purchased
over 2 years ago
Value
4 / 5
Durability
4 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Improved my KDX220R’s performance leaps and bounds!
Supper happy with my v force 3 reeds in my 2001 kdx220. Was having trouble with the bike bogging up top before but it has awesome power all the way through the rpms now. Super easy install and came with the gaskets needed.
August 5, 2019
Liberal, KS, US
Purchased
8 months ago
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
absolute must
Best bang for your buck. Definitely helps with performance and is built to last. highly recommend .
July 27, 2019
Carlisle, PA, US
Age: 25-44
Purchased
1 year ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
6'1 - 6'3
Show more
Rocky Mountain ATV/MC gift card Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 23 questions Browse 23 questions and 67 answers
If I installed this on my 02 yz250 would the carb need rejetted?
A shopper on Nov 20, 2017
BEST ANSWER: When i used the v force reeds i just made sure the bike was always jetted for the right climate and weather conditions according to my owners manual. It ran flawlessly. Id just follow the owners manual for whatever the jetting is supposed to be. However unless the temperature outside changed dramatically from before installing these to after, no, you dont have to rejet it
Does this come with the reeds also? or is this just the housing and are they purchased separately?
Isaiah O on Jan 3, 2017
BEST ANSWER: Isaiah, it is the complete kit. Includes housing and Reeds kitted together. If or when the reed petals need replacing you can buy those separately and very easy to install.
Good luck!
How do you tell when the reeds are bad?
keven a on Aug 19, 2016
BEST ANSWER: Look at the edges and see if they are frayed or torn. Look to made sure the reeds are sitting flat on the housing. Make sure where they connect to the housing, (normally screws with a bar), and that area is not cracked. If visually everything looks good then they should be alright. Symptoms could be hesitation and lost power at the top end.
Does it come with the carb connector ?
A shopper on Oct 3, 2018
BEST ANSWER: No, you just reuse the stock or whichever one is already on your bike. And they are definitely worth the money.
Anyone using this with DEP pipe on a 125?
michael a on Feb 21, 2017
BEST ANSWER: Michael
I did in fact use this with DEP pipe and it made an incredible difference on the bike. Hope this helps.
Al;an
Do the reeds come with all gaskets needed ?
tomi v on Feb 9, 2017
BEST ANSWER: Kit comes with all gaskets needed... direct oem replacement....Install on 96 yz 125 went as smooth as can be
On my 2006 yz85, does the paper gasket go in between the reeds and the engine, or between the reeds and the intake boot? There is only one gasket.
Seth C on Jan 26, 2020
BEST ANSWER: Reeds and intake boot
Other side has some what of a built in o.ring for engine side
Will this part bolt up to a 1988 Honda cr250? If so, what, if any addtional parts are required/altered for a correct fit. NOTE: My top end never "hit's the pipe", but rather sputters and doesn't wind out. I'm trying smaller main jet, and of course, Reed valves in hopes it will fix the issue.
scott m on Apr 29, 2018
BEST ANSWER: Yes, this will fit your machine. You will need to enter in your machine in the drop down boxes above the product image.
Does it come with a new intake boot to carb?
Zachary W on May 21, 2017
BEST ANSWER: No, just the cage and reeds came with mine for our cr 125 and cr 85s
Will there have to be any jetting changes for a 2018 RM85?
Timothy Todd T on Dec 8, 2019
BEST ANSWER: It’s always best to have jetting done after any change to Intake or exhaust installation
Will this work on a 2008 YZ250, big bored to 293?
A shopper on Mar 7, 2020
BEST ANSWER: With the correct jetting this will work perfect.
Will putting this on a yz250 give up the low end grunt for enduro style riding? It seems like track bike upgrade and not so much a off road bike that’s usually really low in rpms
Evan P on Jan 11, 2020
BEST ANSWER: I personally run these on my Yz250, and they do add a little more bottom end power. I do notice them a lot trail riding as well as racing motocross.
Is this v-force 3 reed valve compatible with an 08 Kawasaki kx 100?
A shopper on Sep 11, 2019
BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application.
Has anyone had experience with this setup on a 2007 CR250R? Will re-jetting be required?
Austin H on Feb 9, 2019
BEST ANSWER: No rejet required for just installing a v force reed system.
Does this fit? a 99 Honda
Cr 250
Stephen H on Oct 5, 2018
BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2019 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
Will the intake boot need to be modified/hacked on my 2009 yz250 to install this? On my 99 yz125 it did... didnt realize till after I purchased.
kevin c on Jun 6, 2018
BEST ANSWER: Nope, the parts you had to cut off on your yz 125 intake do not exist on the yz 250. Just bolt in the new reeds in place of the old.
Does the V382A fit the 2012 YZ85?
Bryant B on Feb 26, 2018
BEST ANSWER: Our part number 1033310033 will fit your machine. Which is manufacturer number V382S-A.
Do you offer replacement reeds for V Force 3 on a 2013 KTM 50 mini?
Mark K on Nov 28, 2017
BEST ANSWER: Unfortunately, we do not carry the replacement reeds for the V force 3 for your machine. You may need to check with the manufacturers Moto Tassinari and see if they have the replacement reeds for your machine. I'm sorry for any inconvenience this may cause.
what is the model number for these reeds? are they V351A or V355A I got a 2016 ktm 50sx an an I think I need the V351A an wanted to make sure before I ordered one
Braylon T on Nov 12, 2017
BEST ANSWER: We carry both of those models and if the model you have is the 2016 50 SX, then I show that you would need the V355A. If you have one of the other JR, SR models, then you would need the V351A.
Will this fit a 92 WR 200.or any other reeds fit this bike?
Cory M on Oct 12, 2017
BEST ANSWER: Unfortunately, this will not fit your machine. I checked through our inventory and we do not have any aftermarket reeds. However, we do carry the oem reed valves and reed valve assembly.
what is the model number for these reeds? are they V351A or V355A
chris s on Jul 27, 2017
BEST ANSWER: We carry both of these manufacturer numbers. But they do change depending on your machine. Could you please let me know the make, model, and year of your machine?
What all year model yz 125 heads will interchange with a 2000 yz 125 with no issues?
Lance H on Oct 7, 2016
BEST ANSWER: The only cylinder head that will fit the 2000 YZ125 is the 2000 YZ125. All the other years have changes that make them different.
Is rejetting required?
Darren Y on Aug 25, 2016
BEST ANSWER: In some applications, rejetting may be required depending on machine and outside conditions, but not in every application.
RM Cash ProgramParts Finder