You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
Brett in ON
It fit fine but the quality is a bit poor. All the edges are pretty rough and have excess plastic that wasn't trimmed properly (the very thin stuff that comes out between the molds). I would probably go for a different brand in the future.Read All Reviews
Thomas in VA
I decided to try GYTR's skid plate over Acerbis Plastic MX Skid Plate. The plate mounted right up without any fuss or alignment issues and the plastic used has a little bit of flex in it without feeling brittle. I feel like this will hold up very well. As far as removing the engine mount bolts on the water pump side, a way to access them a bit easier is to remove the shroud and the bottom and top radiator mount bolt. The radiator still has points that hold it up but this allows you to move it out of the way enough to bolt the provided adapter right up and snug it down, just not enough to torque it to spec (its only 25 ft pounds anyways).Read All Reviews