Valve Stems & Caps

Latest Tire & Wheel Accessories Reviews – You could win up to $500 for reviewing products!

• 

  Fusion ATV Chrome Valve Stem

  Raymond in NY

  solid part

  fresh clean look in my A5 rims and strong valve no issues

  Read All Reviews
• 

  Kimpex Tire Ice-Studs with 0.280" Head (500 pk)

  Dmitriy in MI

  Work well while they're in

  These work awesome in hardpack snow and on ice. Very easy to install, probably takes at most an hour per tire if you have an impact or screw gun. I don't recommend using a hybrid/gummy tire however as it's softness means you will loose screws. I would also not recommend going over logs or rocks - again, screws will come out. One 500 count box of 1/2 screws was more than enough for both tires. I've used a little bit of superglue on each screw to help them stay in.

  Read All Reviews
• 

  Tusk Tapered Lug Nut

  Toby in ID

  Ranger lug nuts and stud

  Very fast shipping everything worked well I would recommend this product and dealer

  Read All Reviews
• 

  Tusk Aluminum Front Wheel Spacers Kit

  Isaac in Singapore

  Tusk Aluminum Front Wheel Spacers Kit

  Works like it should. Good value. Like the lip design that holds the seals, not sure if it works better though.

  Read All Reviews
• 

  Tusk Motorcycle Rim Lock

  Richard in AZ

  Stopped tearing off valve stems

  I kept ripping my valve stems on my WR250R and this fixed it.

  Read All Reviews
• 

  Motion Pro LiteLoc Rim Lock

  JOSEPH in MN

  Lighter but can pinch the inner tube

  If you use these rim locks, be sure to use caution to not pinch the inner tube. The deal is, that these are so much smaller that the inner tube won't push them out when you inflate the inner tube. Instead, the inner tube can wrap around the rim lock and get pinched between the tire and the rim lock. When you tighten the rimlock's nut, you will be destroying your inner tube. With a standard rim lock, the large flexible rubber will serve to prevent this situation. That all said, thumbs down.

  Read All Reviews