The Rear Holeshot Link from MB1 Suspension is adjustable with 8 positions over 30mm height. MB1 developed a special rear suspension linkage arm to balance the bike improving overall stability and cornering by lowering the back part of the bike without making the rear suspension softer. This way the bike will have more stability and easier to ride entering corners. Designed to reduce rear end kicking and pitching to the front. No other set up is needed to your suspension with this link and installation is very easy. The Linkage Arm is CNC-machined out of High Grade 7075 Alloy. Comes all ready to bolt on with original OEM bearings and dust seals.
When used as a holeshot device this Rear Holeshot device must be used with a front device at the same time. At the start, the traction from the chain will lift the rear wheel up and will give less traction on the tire. When you use only the front system on the start it brings all the weight to the front then you create wheel spin without traction. When used in conjunction it eliminates those issues. The other good point is you have better control of your bike with lower center of gravity at the start.
The longer linkage arms for certain models are designed to stiffen up the initial curve and lower the rear end of the chassis, making the bike much more stable and lower feeling coming into corners without the fender touching you in the rear. This will also help eliminate the initial loose and wallowy feel you get with certain models without the correct damping. Turning and cornering capabilities are improved over the stock link arms also.