Pro Design Pro-Flow Intake Replacement Uni Filter

The Banshee filter kit comes with a new base plate that bolts to the factory air box. This replacement filter (Banshee #) is the top filter in the picture with the single clamp while the bottom filter is the Raptor 660. The Raptor filter may fit directly onto the carbs but I do not know how much room is under there, having never owned a Banshee myself. Best of luck

Jeremy, yes this filter should be oiled prior to use and cleaned and re-oiled often based on riding conditions and visual condition of the filter. Use a high quality "foam air filter oil". Being a 2 part filter, it is best to first remove the outer pre-filter and the inner metal shaping sleeve; then oil the inner and outer filter individually, then reassemble. Be sure to squeeze out excess oil prior to reassembly. Also be sure to clean any oil off of the rubber sealing surface of the filter (both inside and out) before installing and clamping as to prevent the filter from slipping around and become lose during install.

No, you get the one that fits your machine. The photo shows one that fits the Raptor 660 and one for Honda TRX250 I believe. Go to ProDesign’s website to see specifics for each model.

Ours did. It came complete with inner and outer filter and inner cage..

No, it is just a replacement filter, comes with both inner/outer filters, (two stage) and clamp.... If you need the billet aluminum air box adapter, buy the kit. My applications were '09 YFZ450r, '08 TRX450r, and '10 Raptor 250

The filter I purchased Was just a replacement air filter but I believe you can buy the kit that has the aluminum part that bolts onto the airbox for a little more money

Bought for my Honda 450. Came with yellow and red filter so assume would be same for all.

Thanks for your question! Unfortunately, I do not show this will fit on a 2005 Yamaha YFZ450.

Measured at: 4.506 inches.

To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application.