To give our customers the best shopping experience, our website uses cookies.  Learn More

Ride Engineering One-Piece Oversized Handlebar Mount Stock Triple Clamp

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines
Ride Engineering One-Piece Oversized Handlebar Mount Stock Triple Clamp
  • View Larger
  • Multiple Views
  • Video

Ride Engineering One-Piece Oversized Handlebar Mount Stock Triple Clamp

Our Price: $85.99$94.99

MSRP: $94.95 - $104.95 - You save up to $9.96 (9% off)

View Product Details

Select type, year, make and model above

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: [email protected]
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)

Details

    This one-piece 1 1/8" bar mount is super light with great strength and torsional resistance in the event of a crash. A great alternative to OEM bar mounts that allow the bars to twist when you tip over. Precision machined from aircraft quality aluminum, there is a 6mm difference between the forward and back mounting positions. Ride Engineering also machines their own stainless steel posts that prevent over tightening, unlike the cheap bolts used by other competing brands.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Ride Engineering One-Piece Oversized Handlebar Mount Stock Triple Clamp Reviews

Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
 
4.5 / 5.0
15 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
13
0
0
1
1
Value
4.4 / 5
Durability
4.7 / 5
Fitment
5.0 / 5
Performance
4.7 / 5
Recommend it?
Yes (14)
No (1)
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Must have on a ktm/husky
GREAT OEM REPLACEMENT for ktm/husky. When i first got my husky I kept twisting the bat mounts every time I fell. Obviously the better solution is don’t fall BUT everyone falls. This bar mount is built very well and is very sturdy. Dumped my bike over in some big rocks and everything stayed straight.
November 19, 2019
West Sunbury , PA, US
Purchased
1 year ago
Weight:
221 - 250 lbs.
Height:
5'10 - 6'0
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Difficult for me to locate
Fits 2019 Svartpilen 401 Husqvarna!! Now where do I find longer Brake Cables?
I hated the low, forward, straight handlebar, this part I’m rating I used in order to accept a ProTaper Evo Bar. Everything fits now.
November 14, 2019
Center Ossipee , NH, US
Purchased
1 month ago
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
For use as adapter for Renthal 1 1/8” FAT BARS
I had the Tusk adapters/risers on my 2006 YZ125, but I didn’t like the height it added. These Ride Engineering bar clamps fit my Renthal Fat Bars 1 1/8” and bring me down to the stock height. They have anti vibration mounts as well. The seem well made and durable. Easy to install with clear instructions. Highly recommend.

-m-2006 YAMAHA YZ125--
See anti vibration rubber
Mounted
Mounted
April 10, 2019
New Providence, NJ, US
Age: 25-44
Purchased
8 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
5'10 - 6'0
Value
4 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Best buy to switch from 7/8" to 1 1/8" bars
Direct fit, fits perfectly, drops in and completely installed in less than 15 minutes. Machining quality is second to none. Perfect finish as well.

-m-2019 KAWASAKI KX450F--
March 12, 2019
Port Angeles, WA, US
Age: 25-44
Purchased
1 year ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Very impressive
Super easy to instal. Easy to line up the bars.

-m-2019 KAWASAKI KX450F--
March 8, 2019
Fort Collins , CO, US
Age: 25-44
Purchased
9 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Ride Engineering one piece handlebar mount
The current KTMs come with a pretty weak stock top clamp that bends with even the slightest tip over. These clamps are much more beefy than the stockers. So good I put them on my 450 SXF and 250SX. Quality product.

-m-2018 KTM 450 SX-F--
February 12, 2019
SoCal, CA, US
Age: 45-64
Purchased
1 year ago
Gender:
Male
Weight:
191 - 220 lbs.
Value
3 / 5
Durability
4 / 5
Fitment
5 / 5
Performance
2 / 5
Recommend it?
No
Fits fine but bars always feel loose
Fits as described, but even tightened down fully the bars still feel loose due to the design of the rubber mounts. The bars themselves dont move in the clamp, but the clamp is mounted to the triple mount in rubber and moves much more than I like the feel of.

-m-2007 YAMAHA WR250F--
September 18, 2018
Gainesville, GA, US
Age: 45-64
Purchased
1 year ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
6'1 - 6'3
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
Quality & Durable
Before I bought these it felt like I had to reset my bars after every little tip over. They're much more sturdy and look sharp too.
August 19, 2018
Auburn, ME, US
Age: 25-44
Purchased
1 year ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
2 / 5
Durability
3 / 5
Fitment
5 / 5
Performance
3 / 5
Recommend it?
Yes
2016 KTM 250 sxf
-m-2016 KTM 250 SX-F--Doesn’t come with all the parts /nuts and rubber grommets a big waist of time I replaced it because I wiped out and ruined the old one so the grommets where useable but one of the nuts was cracked and assumed that it was a total kit for $100 ... $3 dollars worth of nuts and grommets cost missing out on a trip riding that weekend
August 3, 2018
Wilmington, MA, US
Age: 25-44
Purchased
1 year ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
5 / 5
Fitment
5 / 5
Performance
5 / 5
Recommend it?
Yes
it's the answer
If you're tired of your bars getting tweeked in their mounts, or bending the bar mount bolts whenever you fall down, get one of these one-piece units from Ride Eng. Problem solved. Well made and machined, accurate fit, strong, and my protaper bar pad fit nicely with some very minor trimming with a razor knife. I highly recommend it. Had these on a previous bike as well, and it's been a must-have from then on for me.
May 14, 2018
Hustisford, WI, US
Purchased
over 2 years ago
Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 16 questions Browse 16 questions and 46 answers
Which if any Bar Pads work with these Clamps?
MICHAEL W on Nov 13, 2016
BEST ANSWER: Most oversized square bar pads have a groove down the middle to allow them to fit. You may have to cut a little bit of foam out to make it fit better, though.
Someone said this doesn’t come with the hardware . Does it even come with the nuts? I have a 16 kx450
Cassandra V on Oct 11, 2018
BEST ANSWER: I'm not sure what hardware you want? when you remove your stock bar mounts you reuse the nuts and washers under your triple clamp. if your stock rubber cones are damaged you can order replacement cones from us. we also have the nuts and washers if you dont want to reuse the stock ones:
https://www.ride-engineering.com/products.php?d=1&p=bm&pn=MX-10125-KT&t=yz

2018 KTM SXF 350. These do not come with the 2 mounting bolts that screw in to the triple clamps, correct? One of my bolts looks bent and threads harder prior to fully tightening. Are these bolts an option?
Sam A on Jun 5, 2019
BEST ANSWER: "Are these bolts an option?" Not sure what bolts you are asking if they are an option. IMO, if you have a bent mounting bolt it should be replaced before install. I would think any bolt the same diameter and length would work.
Will bar pad from twin wall bars fit?
JEFF OR GREG P on Apr 12, 2017
BEST ANSWER: I installed this one-piece mount (which is great because your bars don't get twisted every time you have a fall) with protaper bars. I shaved about 1/4" out of my foam pad with a razor knife, just on the ends, as this clamp assembly is slightly wider than regular individual bar mounts. It was easy and my protaper pad fits flat and snug as it should with that quick modification.
I have pro taper evo bars with the rc bend. How does the pro taper bar pad fit? Does it just go right on or will it need trimming ? Thank you.
Cassandra V on Oct 11, 2018
BEST ANSWER: I am running the clamp with Pro Taper pad and bars , it fits perfect. Vent line on my KX450 is a little tricky to fit into stem but not a deal breaker.
Hey guys , can you use the alloy inserts with this for even more stability?
brent o on May 7, 2018
BEST ANSWER: i'm sure you can. we really prefer rubber mounting to reduce the stresses on your wrist and engine vibration, but if you want them to be super rigid, go for it. Ride eng only provides a firm poly cone (red) and a soft cone (yellow), we don't make aluminum ones but perhaps they are available from another brand.
Description says clamp will only fit the OEM Yamaha clamp with solid bar mounts. Is it possible to provide a picture of the clamp for a 05 YZ250? The pictures and description show rubber mounts but obviously an OEM solid mount triple clamp has no rubber option. Also the 05 YZ250 is a 7/8” stock bar size.
Adam S on Jan 24, 2019
BEST ANSWER: A picture was sent to [email protected]
Will this bar mount work with the EE adjustable risers kit?
Ken F on Mar 20, 2018
BEST ANSWER: we have plus 5mm and plus 10mm spacers for our bar mounts. i don't know what other manufacturers offer i'm sorry.
this
https://www.ride-engineering.com/products.php?d=1&p=bm&pn=AF-BMS05-00&t=
or
https://www.ride-engineering.com/products.php?d=1&p=bm&pn=AF-BMS10-00&t=
Hi! Could anyone tell me what's the height of the mount for 2016 - 2017 KTM 250 - 450 SXF?
Thanks!
Vadzim D on Jul 22, 2017
Ride Engineering One-Piece Oversized Handlebar Mount Stock Triple Clamp
Ride Engineering One-Piece Oversized Handlebar Mount Stock Triple Clamp
Enduro Engineering Handlebar Clamp Kit
Enduro Engineering Handlebar Clamp Kit
BEST ANSWER: the ride eng. bar mount is within a millimeter of the stock bar mount height.
Is the bottom clamp taller then the stock bottom clap on a 2017 YZ 250?
A shopper on Dec 7, 2018
BEST ANSWER: I installed on a 17 fc250, but was about the same height as the stock one on that bike.
What part number do I need for a 2016 KTM 300XC-W? Stock triple clamps and bar mounts. The one I ordered is for Kawasaki's, Suzuki's and rubber mounted KTM triple clamps, despite the RM website telling me that it would fit my bike. I have part number KX-BBMOO-CA.
Joseph R on Jun 29, 2018
BEST ANSWER: i dont understand what you are looking for. all i can see is the above text. are you looking for a bar mount? we only make a replacement bar mount for rubber mounted ktm clamps that are 2015 to present. that pn is kt-bbm00-ca. if you have a solid mount clamp, we don not have a bar mount for that. we only have a full triple clamp set that has rubber mounting.
Will this work with stabilizer?
A shopper on May 23, 2018
BEST ANSWER: This will not work with a stabilizer as there are now stabilizer mount points. I would suggest using a clamp specific for the stabilizer you have/want.
How are these mounted? As in what bolts come with it to mount these clamps to the stock ktm rubber mounts?
Rebecca R on Nov 25, 2017
BEST ANSWER: here is a better photo of our ktm bar mount. it fits 2016 and up models. all the hardware from underneath is OEM. we do not supply the hardware to secure the bar mount to the top triple clamp.
https://ride-engineering.com/products.php?d=1&p=bm&pn=KT-BBM00-CA&t=ktm
will these mount to my stock clamp? does the two mounting bolts come with them to mount to
clamp?
A shopper on Sep 10, 2017
BEST ANSWER: its hard to answer these questions without knowing what bike you have. in general our bar mounts do fit the stock triple clamps. typically you need to reuse your stock rubber bushings ( inside the top triple clamp) and lock nuts (under the top clamp).
Hi! Could anyone please tell me what's the height of the mount for 2016-2017 KTM 250-450 SXF? Thank you!
Vadzim D on Jul 23, 2017
BEST ANSWER: our bar mount is within 1mm of the stock bar mount height no matter which brand we make them for.
Can I use handlebar risers with this?
Jack C on Nov 23, 2016
BEST ANSWER: You could use something like the ROX Speed risers, but then you wouldn't be able to use the top clamp on these clamps which kind of defeats the purpose of these particular clamps.
Rox Speed FX 2
Rox Speed FX 2" Handlebar Risers
RM Cash ProgramParts Finder