Tusk Electronic Power Steering Kit

I’ve only took my rzr out twice after I installed this power steering kit but so far I love it!!well worth the money

-m-2016 POLARIS RANGER RZR S 900 EPS--

My neighbor bought a competitors product for $150 more. Side by side they looked about the same. They installed the same. Looked the same. Bottom line I saved $150 for the same product.

-m-2012 CAN-AM Commander 1000 XT--

This is best improvement I have made to my Can am. The difference is amazing. It was dangerous to drive before but now it is just fun.

-m-2015 CAN-AM Maverick 1000R--

So glad I purchased this best add on I’ve done to the machine. Works flawlessly very simple install first time ever doing one and it was very easy 3 hours. Directions are very detailed and make it clear how to install. Can’t wait to get bigger tires and put it in the rocks and really see what it’s like in sure I will be even happier than I am. Great product and customer service very fast shipping.

-m-2014 CAN-AM Maverick 1000 X rs--

Easy installment, excellent instruction and pictures

-m-2017 HONDA Pioneer 500--

Modification to Computer mount allows nice install with Honda storage unit.

This kit was not only easy to install, it fits great and works even better. After our annual New Years trip, my wife fell in love with this machine, it's so much better off road with the Power Steering. Another Rhino in our group rolled on the trail because the wheel got stuck in a rut and the wheel got away from her. My wife never rolled and was even steering one handed. If you have a Rhino, this is your very first MOD!

This is the 6th one I have installed. They completely change the vehicle and make them a pleasure to ride

-m-2007 YAMAHA RHINO 660 4x4--

Installed with minimal effort and works like a charm

-m-2006 YAMAHA RHINO 660 4x4--

A nice unit, makes a big difference. I consider my skill level to be highly advanced. Still, there were a few issues that had to be worked through. First was the box came with no packing list or instructions. Neither were any available for download. After a couple of days (it came late Friday) I got an email from tech support with the information. I feel they should have been online. Once we got going, the help was excellent, and the instructions complete. The only other problem with installation was the sensor wires from the steering gear to the control box were not long enough to mount the control box in the manner suggested without undue strain on the wires. I ended up welding a bracket to the frame up under the dash. The unit works as advertised. Steering effort is greatly reduced but the steering is a little twitchy. I will check the alignment at next service interval.
Overall a good product.

-m-2008 POLARIS--

This is a great kit, and a fairly easy install. When mounting the motor be careful to keep an eye on interference with the brake fluid reservoir and putting the lower shaft in a bind. The frame crossmember that the motor mounts too is not a precision located componant, so if this brace is slightly off parallel when you tighten the motor brace mounting bolts it will twist and put the lower shaft in a bind and/or cause the universal to hit the reservoir. After several attempts I ended up adding an 1/8" spacer on top of the crossmember which solved everything on my machine, you may not need this on yours, but it did the trick for me. No binding, good clearance, and the motor is virtually silent. My point is to be patient and keep an eye on these items and you will be very happy. On a side note the wiring harness is just long enough for the p500, could stand to be a few inches longer to allow you to follow the factory harness the entire way, but it does reach. This Tusk kit is a great value compared to the other kits on the market and RM ATV is great to work with.

-m-2018 HONDA Pioneer 500--

The power steering was not hard to install and it is the best thing I have done for my rzr . I drove 200 miles of tough mountain trails in two days and wonder why I hadn’t installed it before. I definitely recommend it to anyone with a rzr

-m-2011 POLARIS RANGER RZR S 800--

Went on a 50+ mile ride right after installation and worked great. Wish this had been my first upgrade on this machine. The included directions were ok, but the video posted on this site made a big difference. However, I have the Polaris heater with defrost installed on this machine, and I could not make this power steering unit fit without some modification to the heater's fan box and some grinding/cutting to the steering mount so the prop shaft would clear. There is not enough adjustment in the mounting bracket to make it fit without modification.

-m-2015 POLARIS RANGER RZR S 900--

Everything was just perfect I love it easy enough ,should have done it a long time ago.fast delivery to Ontario Canada no extra charge at all .had problems with other companies

-m-2013 POLARIS RANGER RZR S 800--

This power steering unit works great, it is a night and day driving experience difference and made the wife happy!

Makes driving with larger tires so much easier. Should have done this earlier. However the directions suck. Ended up downloading directions for a competitors kit to figure it out

Overall the power steering kit works great and fits good. There was a little issue with the steering hitting the brake pedal at first so we had to do a little bending to make it work but once those little issues were worked out if works great so far!

-m-2013 POLARIS RANGER 800 EFI Mid Size--

This was the best investment I have ever made for my 2007. Rhino I wish I would have installed this power steering unit a long time ago
Of all the accessories I have purchased for my ride this is the first one to purchase

-m-2007 YAMAHA RHINO 660 4x4--

Good quality product, brackets are perfect (H.D. and correct angles), shafts are top notch, wiring is excellent quality with heat shrink connectors and quality plug connectors.
Two improvements needed: 1) Instructions (pictures were weak)...2) Bolts that hold metal bracket to UTV frame were skimpy - I used larger bolts.

Functionality is great...steering effort reduced alot but still has trail feel... Now - knowing how to install would take me 3 hrs - no cutting corners or good enough approach....but disassembly and cleaning parts while doing it...1st time thru took me a 6 hours by myself...helper would have been great.

-m-2012 POLARIS RANGER RZR XP 900--

Great product, added it on my can am commander and works great, very easy to install.

-m-2012 CAN-AM Commander 800R XT--

Tusk power steering kit was a great addition to my RZR 900 XP. So, much easier to steer especially at low speeds. Never realized what I was missing until after I installed the kit, and went for a test run. The only reason I didn’t rate it at 5 Stars, was the mounting bracket was a pain to install, and some of the mounting hardware was a little flimsy.

they should come from the factory with this but since they don't this is the best option

-m-2017 HONDA Pioneer 500--

I have a 2017 Honda Pioneer 500 just doesn't seem like it made much of a difference to me

-m-2017 HONDA Pioneer 500--

Installation was not too bad. The thing that took me the longest was routing the wires back to the battery box. Installation was simple. I spent about 3hrs on the installation. I just took my time and made sure that I installed everything the way the installation instructions showed. It can probably be installed in 1.5hrs or less. One thing I had to correct is the screws that mounted the control module were too long. I switch them with the screws that were used to mount the controller bracket to the support brace. On the 2015 Pioneer 500 you do not have to remove the steering wheel.

-m-2015 HONDA Pioneer 500--

Well built add-on, I was very pleased with the fit and finish. However, like others have said, the included instructions are crappy at best. On a Honda Pioneer 500, do not remove the steering wheel, and do not remove the voltage regulator. These steps are useless and unnecessary. Also, bolt the controller bracket to the steering motor bracket before you install the steering motor. It'll save you some grief. Two hour install time.
Bottom line, this was a great addition to the Pioneer, especially for low speed maneuvering. After diligent research, RMATVMC had the best price, and delivery was fast & free!

-m-2015 HONDA Pioneer 500--

I recently purchased your tusk power steering kit it was a little difficult following instructions but common sense and luck had it installed in about 2 hours and works great can’t wait to hit some trails with it

-m-2004 YAMAHA RHINO 660 4x4--

great product instruction's on bracket assembly could be a little better but still went together in less than two hours sure make's riding more enjoyable

-m-2014 CAN-AM Maverick Max 1000R--

A great purchase. Easy installation as mentioned only trouble was clearance on break relay switch. Minimal drilling would like it if it was a tad bit easier to turn but one can tell the difference and does away with bump steer. Overall I would give it 4 and 1/2 stars.

-m-2009 YAMAHA RHINO 700 FI 4x4 Auto--

Seems great so far. YouTube video helped more than anything. Provided instructions were severely lacking. Pretty simple install, had to adjust brake light switch to clear.

Very easy to install, even with pretty bad directions. Probably could have looked up the directions online for better pictures, but it was still pretty easy. Took it out today and makes a world of difference. On sand it was probably the same, but in rocks and on pavement it was 100% better. I highly recommend!

-m-2015 HONDA Pioneer 500--

I put it on my 900 rzr, it makes a huge difference in overall handling

very nice product, I used the youtube video to install...so far its great!

-m-2007 YAMAHA RHINO 660 4x4--

Kit fit great on my wife 2013 Maverick XRS.

-m-2013 CAN-AM Maverick 1000 X rs--

I haven’t driven with it yet but it is installed. The directions in the kit are garbage but the YouTube is a lifesaver. Not bad to install after watching the video.

-m-2011 CAN-AM Commander 1000 X--

poor Instructions, watch video first , I took my time installing and it took 5 hours to install, I have not been out on a trail with it yet but just around the neighborhood it works great. Should have installed power steering years ago I will write another review sometime in the spring after I have had this on the trail a couple times so far great addition to my 2012 RZR 800 LE

-m-2012 POLARIS RANGER RZR S 800 LE--

Works awesome! Makes a day of riding much more fun

Bought this product, had it installed, and it works great. I wish I would have bought this sooner. Great product for a great price. i highly recommend this product.

-m-2010 POLARIS RANGER RZR 4 800--

took a bit to understand the mount and how it fit on the machine once the lighjt came on it fit perfect.

-m-2008 POLARIS --

RM ATV is great in price and delivery.
Easy to install, Had it installed in about 2 hours. Not bad for my first ever power steering install. Until it came to the wireing.
Instruction and generic and failed me with where to attach the white power line. After much investigating I attached it to the white/black stripe off the DC outlet.
Would have saved me hours if the pathetic instructions would recommend this.
Cant rate durability as I just installed it.

-m-2017 HONDA Pioneer 500--

After reading other reviews I was a little concerned about adjusting. Put everything together loose, and use the stock bolt in the U joint at the brake switch. Done.

-m-2011 YAMAHA RHINO 700 FI 4x4 Auto--

Installed on my 2006 rhino 660. Works great and was a 3 hour self install. Could do it in 1/2 the time on the next one. Watch the install video before you start as it will save you time. Eliminates the hard steering over rough terrain 100%. Wish I had done it sooner.

-m-2006 YAMAHA RHINO 660 4x4--

I am a bit disappointed in the power assisting feature of it. Seems it would have more power and I could use less power of my arms. Is it adjustable?

-m-2015 HONDA Pioneer 500--

This will be for a 2012 ranger rzr 800, Will this kit reduce or get rid of the feedback and extreme kickback from riding trails without power steering?

-m-2012 POLARIS RANGER RZR 800--

This purchase was a pretty good deal with some RM cash in my account and the Tusk monthly discount. Everything was packaged well. The instructions are in a nice protective plastic and actually helpful. I did watch the RM Tusk install video, but the model was different than mine, however some of the tips of relevant parts were helpful like the steering shaft removal. Do not remove the bolts holding the brake pedal like the video shows. the 2012 XP mounts different. It is shown in the instructions how it mounts.
I spent a afternoon taking my time with the install, finishing with electrical routing and wiring. It is not one finger steering, but you can tell it is working, and its quiet. So far happy with the purchase and good value.
Wouldn't hurt to include a few zip ties to fasten down the electrical harness, but I used everything in the kit.

-m-2012 POLARIS RANGER RZR XP 900--

So far it's been great but haven't had it long. It's just as good as factory eps in my opinion. Save your self the frustration and just watch the video made by tusk for the install the instructions are less then great.

-m-2016 POLARIS RANGER RZR S 900--

Needs vehicle specific install video other then that very nice set up

Very easy installation. Completely changes the way the steering feels. Really going to enjoy the easier steering out on the trail. Can't really say about durability yet but will find out soon enough. Wish I had gotten it earlier. Was a mush have after installing a torque locker.

-m-2017 HONDA Pioneer 500--

I installed it into my 2017 Honda Pioneer 500 and it changed everything! All too often I'd have to steer with my left hand while keeping my dog from flying by holding her with my right. the power steering seriously reduced the wear and tear on my hand, wrist and arm muscles significantly. Fitment was a little tight but after taking it for a test drive and moving it a 1/2 inch it its all smooth sailing.....

-m-2017 HONDA Pioneer 500--

installed this on my grandparents 13 maverick and they love the difference it made on steering for them. They ride dirt, and dunes and makes it easier for them to drive.

-m-2013 CAN-AM Maverick 1000 X rs--

Power steering appears to work well, the directions are wrong. They indicated the mount was supposed to mount to the steering hinges bolt on the left side...it actually mounts up on the bottom of the steering raising shock. The rest of the installation is straight forward.

-m-2011 POLARIS RANGER RZR 800--