To give our customers the best shopping experience, our website uses cookies.  Learn More

Tusk Handlebar Risers

This is a "machine-selection optional" part.Please choose a vehicle to see the options specific to your machine.choose from all of the options below and add to cart.

Fits Your Machine

Displaying parts for your 2017 YAMAHA YZ85

Tusk Handlebar Risers
  • View Larger

    Tusk Handlebar Risers

    Fits: 2017 YAMAHA YZ85

    Our Price: $18.99$24.99

    MSRP: $22.99 - $28.99 - You save up to $4.00 (14% off)

    View Product Details

    Select options above to check availability

    Live Help
    • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

      -Dan Thomas, CEO and Founder

    • Returns

      We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

    • Warranties

      We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

    • Have questions?

      Live Help (Leave email if after hours)
      Email: [email protected]
      Call us: 1 800 336-5437
      7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)

    Details

      The Tusk Handlebar Riser Kit makes it easy to increase the handlebar height on your motorcycle or ATV. Tusk handlebar risers are made from tough billet 6061 T-6 aluminum and come with high-grade 12.9 chromoly steel bolts. Tusk makes handlebar risers for both 7/8" and 1 1/8" handlebars. Additionally, risers are available in both 15mm and 30mm heights. Think of Tusk for quality parts and accessories (such as these handlebar risers) for your motorcycle or ATV!
    • Tusk handlebar risers increase handlebar height by either 15mm (0.6") or 30mm (1.2").
    • Spacers are made from billet 6061 T-6 aluminum.
    • Tusk handlebar risers are complete with strong 12.9 tensile strength chromoly steel bolts.
    • Handlebar risers are available for both standard 7/8" bars and oversized 1 1/8" bars.
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Tusk Handlebar Risers Reviews

    Each review submitted enters you into a
    $100 gift card monthly drawing and a
    $500 gift card quarterly drawing!
     
    4.8 / 5.0
    411 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    344
    50
    10
    4
    3
    Value
    4.8 / 5
    Durability
    4.8 / 5
    Fitment
    4.8 / 5
    Performance
    4.8 / 5
    Recommend it?
    Yes (217)
    No (3)
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Good fitment, great price!
    Basic and straight forward. Fit my 2010 yz450f with factory Pro Taper bars well. Easy 10 minute install.

    -m-2010 YAMAHA YZ450F--
    September 4, 2019
    Boise, ID, US
    Age: 25-44
    Purchased
    3 weeks ago
    Gender:
    Male
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Braaapppppp
    Excellent move to buy these great machines pieces that are very nice when you like to stand and ride
    August 27, 2019
    Crumpton , MD, US
    Age: 25-44
    Purchased
    1 year ago
    Gender:
    Male
    Weight:
    161 - 190 lbs.
    Height:
    5'7 - 5'9
    Value
    1 / 5
    Durability
    1 / 5
    Fitment
    1 / 5
    Performance
    1 / 5
    Recommend it?
    No
    Not for BMW G650GS
    These are supposed to be a universal fit, but they will not work with a BMW G650GS. I tried to use a grinder to fit, but nothing would work and ended up throwing them in the trash. I had previously purchased them for my wife's Yamaha and they fit perfectly.

    $20 down the tubes.

    ........

    -m-2014--
    August 27, 2019
    COLORADO SPRINGS, CO, US
    Age: 45-64
    Purchased
    3 weeks ago
    Gender:
    Male
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Great product and price
    Fantastic product fits perfectly and raised the bars up and back to be more comfortable
    August 26, 2019
    Anderson, SC, US
    Age: 45-64
    Purchased
    1 month ago
    Gender:
    Male
    Weight:
    191 - 220 lbs.
    Height:
    5'10 - 6'0
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Great addition
    I’m 5’9” and I like to scoot around on a crf 230 I have to lean way forward when I’m riding I bought these and installed them along with renthal cr high bends now I can stand up and have my palms on the grips
    August 22, 2019
    Pioneer , CA, US
    Age: 45-64
    Purchased
    1 month ago
    Gender:
    Male
    Weight:
    161 - 190 lbs.
    Height:
    5'7 - 5'9
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Great product
    Fit great and gave me the desired height. Got the bars up in my 2019 te150
    August 7, 2019
    escalante, UT, US
    Purchased
    1 month ago
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    A must for tall riders
    They are just long enough to not limit your turning with the stock handlebars. These are my second pair and I will buy for all my future bikes
    July 31, 2019
    Sherwood, OR, US
    Age: 15-24
    Purchased
    6 months ago
    Gender:
    Male
    Weight:
    221 - 250 lbs.
    Height:
    6'1 - 6'3
    Value
    4 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Good product.
    Installed on easily and gave me a far more comfortable riding position. Seem sturdy while being lightweight too. Price seems a little high for something so small though.
    July 21, 2019
    Vineyard, UT, US
    Age: 25-44
    Gender:
    Male
    Weight:
    191 - 220 lbs.
    Height:
    5'10 - 6'0
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Great procduct.
    These work great and are easy to install. Makes it possible to ride more comfortably and stand up straight.
    July 10, 2019
    Morro Bay, CA, US
    Purchased
    1 year ago
    Value
    5 / 5
    Durability
    5 / 5
    Fitment
    5 / 5
    Performance
    5 / 5
    Recommend it?
    Yes
    Highly recommend these
    The handle bar risers were easy to install and fit perfect. Didn’t have to adjust or modify my handle bar guards. Highly recommend for the taller riders.

    -m-2013 YAMAHA YZ450F--
    July 3, 2019
    Post falls, ID, US
    Age: 25-44
    Purchased
    2 months ago
    Gender:
    Male
    Weight:
    161 - 190 lbs.
    Height:
    5'10 - 6'0
    Each question or answer submitted enters you into a:
    $100 gift card monthly drawing and a
    $500 gift card quarterly drawing!
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 24 questions Browse 24 questions and 99 answers
    2007 and up yz250 has 1 1/8 bars from factory. My question is are these risers from 1 1/8 to 1 1/18?
    Steve M on Nov 3, 2016
    BEST ANSWER: Steve, not sure what you mean by 1 1/8 to 1 1/18. You can buy these riser for 1-1/8 bars or you can choose the ones for 7/8" bars and then choose the height you want. my bars are 7/8 and I choose the 30 mm which is about 1 1/8" tall. The 1-1/8 diameter and 30mm tall should fit your bike if it does list them for yours. they are fairly universal as far as fitting on different bikes and they look okay when on. I put these on a 06 KLR and just recently a 2016 DR650. My only concern was cable length but it turns out may cables were long enough. there are other types of risers out there but for the price these seem to be just fine. Hope this helps.
    What size would I
    need for my 2016 Yz250fx, 11/8 or 7/8?
    Jason S on Sep 28, 2016
    BEST ANSWER: The stock handlebars are 7/8", but if you have upgraded to a different size bar, you would need the 1 1/8".
    Does the riser come with top clamp?
    A shopper on Feb 27, 2017
    BEST ANSWER: No, it's just the riser. You should reuse the original top clamps.
    09 KLX250s - Will I need longer cables if I install the 30mm or 15mm risers?
    Brandon L on Jan 23, 2017
    BEST ANSWER: Usually no. You may need to re-route them, but the stock cables should still work.
    Would i need longer cables for a crf100f 7/8, 15mm?
    Diego Z on Apr 29, 2017
    BEST ANSWER: Have mounted the 30mm risers on numerous bikes and quads (BMW/Yamaha/Honda/Suzuki) and never had a problem with the factory cables. You MAY have to clip a few wire ties to get your mounting and turning sorted out - but then you can reinstall wire ties as needed. Given the above I would say that the 15mm riser blocks will work just fine for you. Ride safe!
    I'm interested in raising the height of my OEM 2009 Kawasaki KX100 handle bars.

    If I get the Tusk 30MM risers would I need longer clutch and front break cables? Any idea what the correct length I would need with the 30MM risers installed?
    A shopper on Dec 28, 2016
    BEST ANSWER: I Installed the same height risers on my 94 kx500 and the oem length cables and such fit without binding. You could just hold your stock parts 30mm up when you turned full lock in the direction that shortens your cable the most to see if you have enough slack.
    When ordering when they say 1 is that for 1 riser or 1 set of risers?
    A shopper on Nov 25, 2018
    BEST ANSWER: These are a very good product. They come as a set, two risers. Double check the diameter of your handlebars.
    I have a 2018 Yz250f I’m pretty sure my bars are 1 1/8? they are stock and I’m 6”2im just looking to raise my bars because when I stand up they are a little little short for me and I find myself hunched over a lot while riding the trails just wondering if I should should get the 15mm or30mm? thanks in advance
    landen b on Aug 12, 2018
    BEST ANSWER: At 6.2 i would go with the 30 mm but put your bike on a stand and then stand up and hold your hands where they are comfortable and then have someone measure the distance between your current bars and your hands. You can also rotate bars forward for a bit more height.
    Can you take a bike that has 7/8 and get the 15 mm riser for 1/18 it’s a rm 85 and I want to put 1/18 bars on it?
    Nathan J on May 8, 2019
    BEST ANSWER: I would say no because the perch spacing is different. RM does however sell a pro taper and an ODI brand big bar adapter allowing you to run 1 1/8 bars on a 7/8 perch. It will also give some rise as well due to the design. Tusk makes an option for this as well that I run on an older YZ250 with no issues.
    Will it fit a trx400ex (has 7/8 bars)?
    Paul C on Jan 11, 2017
    BEST ANSWER: They should fit as long as you get them for the7/8 bar but I'm not sure how your handle bars are secured. Each riser is only secured I the bar clamp by two bolts so as long as that matches up you should be fine
    Will they fit 2005 rm 65 ?
    Justin H on Sep 15, 2018
    BEST ANSWER: I purchased them to fit my Honda XR250, but according to the website, they are also available for a 2005 RM65. I have never had an issue with Rocky Mountain in regard to returns, so I would not hesitate to order them. If they don't fit, I am sure you could return them.
    Tusk Handlebar Risers
    Tusk Handlebar Risers
    Can these risers be stacked?
    Erika P on Jun 6, 2018
    BEST ANSWER: Yes, but it is dangerous. The added leverage on the screws can rip them out, bend them, or break them off. If you need more height look into Rox adjustable risers. They are a bit more money but well worth it for safety and adjustability.
    Will these fit a 2017 (gen II) Super Tenere?
    Henry S on May 17, 2018
    BEST ANSWER: Depends on the bar size. Standard size is 7/8" but if they are thicker like a Pro Taper size then you would just order that size. I believe Tusk has both.
    Will these fit my 2008 Yamaha Raptor 700? Pictures look like it would be a great fit!
    MIKE N on Apr 27, 2019
    BEST ANSWER: No idea bud. They don't even say that they fit the 400ex. It says they fit a 450 Honda bike so I took a chance and they fit perfectly.
    Would a 33mm riser fit a klr 605 without changing cables?
    A shopper on Feb 11, 2019
    BEST ANSWER: It should but make sure there is some free play to work with on the cables first. Most bikes have some extra cable play. Done several bikes and always had enough cable
    I have a 2017 yz250fx with stock handlebars witch ones do I need?
    A shopper on May 19, 2018
    BEST ANSWER: s long as you get correct bar diameter....and your cables are long enough.
    I have the tusk big bar adapters on right now but I need more height. Do I attach the risers to them or swap them out?
    Alex S on Sep 17, 2018
    BEST ANSWER: There is a brand, maybe Tusk has them too, that lets you pivot the rear part upwards. I had the same problem as you. Ended up having to rotate my bars forward which was not the best solution.
    I have a 2009 Yamaha ttr 125le. The hole centres on the bar mounts are about 33 mm apart. Will the Tusk handlebar mounts fit? I know they fit earlier bikes, but read a review where they did not fit a newer bike.
    Michael W on Jul 23, 2018
    BEST ANSWER: I installed them on a 2009 TTR125L no problem. They'll bolt right up
    i need handlebar riser for my 2017 honda cb500x without modification of my cables do you have one?
    Francois B on Jun 6, 2019
    BEST ANSWER: You will have to ask your Honda buddies I put them on a 650 KLR.
    Will these fit a 2018 crf250l?
    A shopper on Mar 31, 2019
    BEST ANSWER: To see if this part will fit your machine please enter the make, model, and year into our "Choose a vehicle" drop down boxes found above the product image. If your machine is not listed, we may not carry the right item for your application. If you have a 2019 year model but don't see your machine as an option, please contact a tech via Live Chat or call us at 1-800-336-5437 for assistance.
    HI, I have a 2017 WR250R and would like to buy TUSK 30mm risers. Would I need extra wires / cables?
    A shopper on Jan 21, 2018
    BEST ANSWER: you should need to. you may have to reroute them to me them have a little more slack but it should be fine with stock.
    Will these fit my 06 LTR450? Just need to raise stock 1-2”s
    justin c on Jan 8, 2018
    BEST ANSWER: if your hand guards are the same kind of mounts as these are then yes it will.
    What is the distance between the hole/screws? I wanted to make sure it fits my CB500X.
    WILLIAM W on Mar 9, 2017
    BEST ANSWER: The holes are oblong to fit many different machines. The center to center measurement is 1-9/16".
    Hi I have a 08 Kx450f with oversized pro taper bars. Would these risers work with oversized bars?
    Harley A on Feb 28, 2017
    BEST ANSWER: Yes, if you order the risers for the 1-1/8" bars.
    RM Cash ProgramParts Finder