Tusk UTV Fire Extinguisher Mount

Fire extinguisher mounts a little loose. It vibrates around and is very loud. I had to squeeze the clamp together to prevent the extinguisher from vibrating which now makes it a bit more difficult to remove. I wouldn’t recommend.

Works without a problem for my RZR

-m-2019 POLARIS RANGER RZR S 1000 EPS--

Very easy to install. Quick release is simple to work. Lets just hope I never need it for real. Would recommend it to anyone. Price is right.

-m-2011 POLARIS RANGER RZR XP 900--

Nice product for the price.very easy to install.would recommend to anyone.

bought this b/c i didn't want to spend $100+ on a mount. easy to install. when the bottle is the mount, it does fit a bit loose and i was afraid it would rattle a bunch. i mounted the 1st one i bought on my buddys 2013 rzr. mounted on top cross bar at about the 5 o'clock position. no problems no rattling. 2nd one i bought i put on my 2020 maverick sport. only place to really mount it was on the vertical bar. it did rattle a bit. i cut some strips of 1/16" rubber gasket to put under the clamps on the cage to keep it from scratching. i took that same rubber and put on the fire extinguisher mount to tighten the fit and no rattles. have 200 miles with the mount and so far no issues.

-m-2020 CAN-AM Maverick Sport 1000R X MR--

Rattles like no ones buisness!

-m-2019 POLARIS RANGER RZR XP 4 1000 RIDE COMMAND Edit.--

Best value out there for a mount.

Be careful on over tightening the hose clamp - they can break and are not cheap or easy to find in stock locally. They are called a t-bolt hose clamp & hard to find in the 2" size.

But, overall - a great deal.

-m-2019 POLARIS RANGER RZR XP 4 TURBO EPS--

Had to use addition of a tywrap to keep it from rattling, otherwise I would give this five stars. Nice bracket.

-m-2017 POLARIS RANGER RZR XP 1000--

Great price and quality. Shipping was fast and the mount is easy to use. A must have on everyone’s ride.

-m-2014 POLARIS RANGER RZR XP 900--

looks and fits well. had to cut bolt off when tightened all the way on a 1.75 rzr roll bar. it rattles extremely loud. wrapped it with gorilla tape

-m-2018 POLARIS RANGER RZR XP TURBO S--

Out of the package with rust and paint bubbling.
Had to spray it with rust neutralizer/ remover and repaint

-m-2018 CAN-AM Maverick Trail 1000 DPS--

The mounts are weakly welded and one broke upon install. I had to sub regular hose clamps. The thing rattles like crazy and is annoying. Not sure if all mounts are like this or not. I would likely save your money and buy one of the better ones. Two stars since it did hold the fire extinguisher securely.

This particular extinguisher mount is a great value compared to other brands and works well enough. That comes at a cost though. It is not as attractive, It tends to rattle a bit, and the hose clamps are not good for a smaller tube. I've never actually had to use it, but I'm worried that the pin will be hard to get out in an emergency due to the metal on metal design and the dust and dirt it's exposed to.

Safety first so I felt I needed this on board. Finding a place to suit you maybe a challenge .

-m-2018 POLARIS RANGER 1000 XP EPS--

Price is good compared to others that are out in the market to purchase. I would recommend for those that are not looking to spend 200 plus dollars

Shipping was quick,the mount fit perfectely,installation was a snap.Go Tusk!!!!!!!!!!!!!

-m-2016 ARCTIC CAT WILDCAT X 1000 Limited--

Excellent product had no problems installing this item to my canam x3. Very easy and great

This is my second one now. Great product. It holds the fire extinguisher nice n tight and is super easy to remove. I have one one the roll cage of both my ATV s. I just had to pinch it together with a channel locks a slight bit to keep the extinguisher from rattling. Great product!!!!

-m-UTV--

Works great for what you paid for it! Slide some spring washers along the inside and it does not rattle when you ride. Love it!

The mount itself is decent though had to use a washer to stop the rattling. The hose clamps they give you are marginal. One broke trying to install it. Over it’s just ok for me may with some better clamps I’d rate it higher.

-m-2017 CAN-AM Maverick X3 X RS Turbo R--

I like the overall concept of the design. But the mount on the extinguisher to the mount on the cage makes a lot of rattling noise. Which drives me nuts while riding. Be warned it's got movement while in motion. Everything else works as advertised.

-m-2017 POLARIS RANGER RZR XP 4 TURBO EPS--

this is an ok mount for the price. Be forewarned- it will rattle. The rattling caused the pin holding the top hook in place (not the quick release pin) to break off on first ride. I had to run a bolt through it with lock washer to replace the top pin which broke off.

-m-2018 POLARIS RANGER RZR XP 4 TURBO EPS--

The mount is strong but the fire extinguisher flops back and forth and rattles. I coated the base bracket with silicone to fill in the space and now it works great.

Very nice product easy to Install just one thing I’m using a Fire Ade Extinguisher on my RZR so i had to get smaller hose clamps.Wish it would of come with 2 different size clamps. Overall great Product ????????

-m-2017 POLARIS RANGER RZR S 900--

I'm happy with my purchase looks like this bracket will outlast my machine. May have a slight rattle but looks like a simple fix place some rubber in the track to hold it tight. No need to buy those expensive fire extinguisher brackets. Quality stainless clamps will be putting some vacuum plugs on leftover threads to keep from scrapes and cuts while trying to use in a hurry. hoping I never have to use fire extinguisher and can enjoy the ride knowing safety is within arms reach

After reading the reviews I figured it can't be all bad.
I was wrong.
Now i have to figure out a way to keep it from rattling.
Someone said use a bungi cord. Are you kidding me?
I didn't think it was going to be so loose.
Now i see why guys spend $100 on one.
Actually my $15 velcro one was better

Nice. Not as noisy as some of them. Purchased a second one for my other rig.

-m-2018 POLARIS RANGER RZR XP 4 TURBO EPS--

The Tusk UTV Fire Extinguisher mount was easy to install and included everything needed to install it. Received product quickly. Thanks!

For the money, this is a good solution for mounting a fire extinguisher. It can be mounted on a flat surface by drilling holes in the mount. Only dislike is the loose fit between the 2 parts. I had to squeeze the ears together on the base mount to keep it from ratteling so much.

-m-2018 POLARIS RANGER RZR 900 TRAIL--

Fit to perfection. Does not move even a little. Quick access should you ever need it.

-m-2017 KAWASAKI MULE Pro-FXT EPS--

Great product. Good instructions. Works just as good as expensive mounts. Gets job done and works great!!!

-m-2017 CAN-AM Maverick X3 Max Turbo R--

I have been using the mount for years now. Really a good product. EASY to install.

-m-2014 POLARIS RANGER RZR XP 1000--

I have added this to multiple machines and highly recommend it. Easy to install and use. I recommend a cotter pin on the removable part that releases the extinguisher though. Easy fix.

-m-2017 CAN-AM Maverick X3 X DS Turbo R--

-m-2015 POLARIS RANGER RZR XP 1000--

Quick and easy

-m-2013 ARCTIC CAT WILDCAT 4 1000--

Great value on a well built easy to install fire extinguisher mount

-m-2015 POLARIS RANGER RZR 900 TRAIL--

Excellent mount for cost. However, the powder coat was chipped and flaked off in several places. RMATV was great in sending a replacement, however, it too had a chip. I ended up just stripping it down and repainting it.

Easy to install. it does rattle, but I did not here it when driving on the trails. Went on some very rough trails and did not move.

-m-2017 POLARIS RANGER RZR S 1000 EPS--

Great product with easy installation

-m-2016 POLARIS RANGER RZR XP 4 1000--

Simple easy set up but it does rattle. But a quick wrap with a rubber bungee cord will solve the problem and still be easy to access.

This item proves great value for your safety. It is easy to install and easy to remove to move the location or to another vehicle. I would highly recommend this for your safety and piece of mind.

-m-2017 POLARIS RANGER RZR XP 4 1000--

Nice solid mount, only down fall is it vibrates while riding, kinda aggravating.

-m-2017 POLARIS RANGER RZR XP 1000--

It works, but it has a couple of flaws. It's loose, so it rattles. The paint started flaking off mine immediately. Easy to pull the pin and separate the fire extinguisher from the mount. The hose clamps are high quality and hold the mounts nice and tight to the roll bar and fire extinguisher. They don't come loose. The hose clamps are very large, giving you a great range to fit oversize roll bars or fire extinguishers. It's the least expensive one that I could find and it does function just fine.

-m-2016 POLARIS RANGER RZR S 1000 EPS--

It would rattle if you didn't put a shim in it. I put a copper shim on the top pin. The top pin was only finger tight.

-m-POLARIS RANGER 800 EFI--

Bought the fire extinguisher elsewhere but still fit mount kit well. I did put some rubbing hosing between roll cage and clamps to reduce any rattle.

-m-2016 POLARIS RANGER RZR 900 TRAIL--

The best thing about this mount is its quick release pin and it is built strong, So in an emergency, your access will be good and quick. The clamps that were supplied for mounting were extremely ugly to the point I went out and bought 4 new high-quality stainless steel clamps from the hardware store that are just as strong but a whole lot better and cleaner looking. And the most disappointing part is that it has a major design flaw, that being that it rattles with every little bump. So you will need to figure out how to modify it, to stop the rattles. The concept is excellent but the finished product is only fair at best.

Knowing what I know now I would not purchase this product until it was redesigned not to rattle and also included far superior clamps.

-m-2016 YAMAHA Wolverine R-Spec 4x4--

Awesome product for the price. Good quality clamps and mounts up well. Finish started chipping before even installed but for the price nothing a rattle can can't fix. Will purchase again for other SXS's

Great mount but the 1 of the t-bolt clamps broke during installation. I'm thinking they should have sent regular hose clamps.

-m-2017 POLARIS RANGER RZR XP 1000--

Easy to install and easy to use

-m-2014 POLARIS RANGER RZR XP 900--

Used this mount to mount fire extinguisher, bottles for air to tire when flat. excellent!!

-m-2017 POLARIS RANGER RZR XP 1000 HIGH LIFTER Edit.--